Integral LED SPACELUX ILHBG007 User manual

INSTALLATION GUIDE FOR INTEGRAL LED
“SPACELUX” HIGH BAYS - NON-DIMMABLE
EN
Thank you for purchasing an INTEGRAL LED product. When installed correctly this unit will provide years
of service – with no lamp changes required. For support or warranty information please see www.integral-
led.com.
Important Details – Please read prior to installation
1. This product must be installed by a qualied electrician in accordance with instructions provided and in
compliance with recognised electrical and safety regulations relevant to the country it is being installed.
2. Please follow installation guide below
3. Please use appropriate xings screws and chain (not provided) and ensure mounting eye is securely
tightened to the suspension bracket through the nut.
4. Connect the cut+t 2m power lead to a suitable junction box to maintain IP rating. Please pay attention
to the polarity and earth as shown in “Wiring Connection” below.
5. Please ensure that 3-core H05RN-F minimum 3x1mm² cable is used.
6. If reector hood is required please following installation guide below and used the 8 washer provided.
7. This product is not suitable for dimming.
8. No user serviceable parts.
9. This product is a Class I device - an earth connection is MANDATORY.
Ø560 Reector hood Ø560
Integral Product
Code Wattage Lumens Colour Temp.
Beam
Angle
Lumens per
Watt Product Dimensions Net Weight (KG)
ILHBG007 160W 20960 5000 110° 131 Ø 560 x H: 70 mm
without bracket 3.85
Accessories for Ø 560 High Bays
ILHBAR008 Silver Aluminium Reector Hood for Ø560 Spacelux
ILHBAR013 White Aluminium Reector Hood for Ø560 Spacelux
Ø420
Integral Product Code Wattage Lumens Colour Temp. Beam Angle Lumens per Watt Product Dimensions Net Weight (KG)
ILHBG007 160W 20960 5000 110° 131 Ø 560 x H: 70 mm without bracket 3.85

• Operating and storage of luminaire must be within rated temperature and humidity guidelines. Operation must
be within rated input voltage.
• Keep away from strong electromagnetic radiation sources and protect from lightning strike.
• Should the unit malfunction, return to distributor or reseller. No user serviceable parts inside. Risk of electric
shock, do not disassemble or attempt to repair the luminaire.
• Do not install or use the luminaire if the casing is found to be broken.
• The luminaire must be installed by a qualied electrician.
• The luminaire should be positioned away from heat and vibration. Avoid contact with any corrosive chemicals.
• The luminaire should be mounted in free air it is recommended not to exceed 30°C ambient.
• Never cover the luminaire with heat insulation materials.
• The luminaire should be positioned at least 1 metre away from radios, failure to do so may aect radio reception
• Luminaires supplied cables should be protected from direct sunlight and installed in appropriate protective conduit for
external applications.
Notes:
Always turn o power before installation and maintenance.
SPACELUX INSTALLATION GUIDE
REFLECTOR HOOD INSTALLATION GUIDE
WIRING CONNECTION
Step 1
Step 4
Step 1
Step 2
Step 2
Step 3
Step 3
Remove 8 screws
Use the 8 washers
(included with the
reflector hood) with
each screw to retain the
reflector hood in position
󴖦
Figure 1
The Circular high bay is a Class I device - an earth connection is MANDATORY.
Brown: Live
Yellow/green: Earth
Blue: Neutral
IP65
Non-Dimmable
IK Rating
Warranty/Technical and contact information
are all available at www.integral-led.com
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH
HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST.
CHECK WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
Integral LED is a division
of Integral Memory plc:
Unit 6, Iron Bridge Close,
Iron Bridge Business Park,
London, NW10 0UF, UK