Integrated Power Designs ELS-120 Series User manual

INTEGRATED
POWER DESIGNS
300 Stewart Road
Wilkes-Barre, PA 18706 USA
Phone: [phone]
Web: www.ipdpower.com
Email: [e-mail]
Fax: [phone]
DRAWING NO: 1080054
REVISION: 5
ELS-120 SERIES OPERATING INSTRUCTIONS
INPUT RATING: 100-240VAC, 5A, 50-60 Hz.
OUTPUT RATING: 120-150 Watts Maximum Total Continuous Output Power Internal Fan Cooled.
Refer to Product Data Sheet for additional derating requirements.
MODEL LISTING:
MODEL
OUTPUT 1
OUTPUT 2
OUTPUT 3
POWER OUT (MAX)
ELS-120-3001
+5V/12A
+24V/3A
-12V/1A
120 W
ELS-120-3002
+5V/12A
+24V/3A
-15V/1A
120 W
ELS-120-3003
+5V/12A
+12V/3A
-12V/2A
120 W
ELS-120-3004
+5V/12A
+15V/2A
-15V/2A
120 W
ELS-120-3005
+5V/12A
+24V/3A
-24V/1A
120 W
ELS-120-3006
+12V/7A
+24V/1A
-5V/2A
120 W
ELS-120-3007
+24V/4A
+5V/2A
-12V/1A
120 W
ELS-120-3008
+24V/4A
+5V/2A
-15V/1A
120 W
ELS-120-2001
+5V/12A
+12V/5A
-
120 W
ELS-120-2002
+5V/12A
+15V/4A
-
120 W
ELS-120-2003
+5V/12A
+24V/3A
-
120 W
ELS-120-2004
+12V/9A
+5V/3A
-
120 W
ELS-120-2005
+12V/8A
-12V/2A
-
120 W
ELS-120-2006
+12V/8A
+15V/2A
-
120 W
ELS-120-2007
+12V/8A
+24V/1A
-
120 W
ELS-120-2008
+15V/8A
-15V/2A
-
120 W
ELS-120-2009
+24V/4A
+12V/2A
-
120 W
ELS-120-2010
+24V/4A
+15V/2A
-
120 W
ELS-120-1001
12V/12.5A
-
-
150 W
ELS-120-1002
15V/10.0A
-
-
150 W
ELS-120-1003
24V/6.3A
-
-
150 W
NOTES: 1. Suffix added to the model number indicates the following configurations:
C14 –Class I AC Input, IEC320-C14, Standard
C6 –Class I AC Input, IEC320-C6, Option
DECLARATION OF CONFORMITY
Manufacturer: Integrated Power Designs, Inc.
Manufacturer’s Address: 300 Stewart Road, Wilkes-Barre, PA 18706 USA
Product Type: Switchmode AC-DC Power Supply
Declares all models listed above including all options are in compliance with the following European Community Directives:
Low Voltage Directive 2014/35/EU of 26 February 2014
RoHS Directive 2015/863/EU of 31 March 2015
EMC Directive 2014/30/EU of 29 March 2014
As well as with the requirements set out in the Laws of the United Kingdom relating to and applying the following standards:
Electrical Equipment (Safety) Regulations 2016 SI No. 1101
BS EN 62368-1:2014
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 SI No. 3032 + 2019 SI No.492
Electromagnetic Compatibility Regulations 2016 SI No. 1091
BS EN 55032:2015/AC:2016 Class B
BS EN 61000-3-2:2014
BS EN 61000-3-3:2013
In addition, all models are Certified to be in compliance with applicable requirements of UL 62368-1:2014, ANSI/AAMI ES6061-1:2005 (R) 2012, IEC 62368-
1:2014 and IEC 60601-1:2005/A1:2012 including all EU national deviations, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA-C22.2 No. 60601-1:2014, EN
62368-1:2014 and EN 60601-1:2006/ A1:2012.
BY:
Steven Thompson- President
EUROPEAN CONTACT:
UK CONTACT:
Compumess Elektronik GmbH
Lise-Meitner-Strasse 1
85716 Unterschleiβheim
Telephone [phone]
ALL PSU LTD
Laser Quay, Culpeper Close
Rochester Kent ME2 4HU
Tel : [phone]
PLACE:
Integrated Power Designs
300 Stewart Road, Wilkes-Barre, PA 18706 USA
DATE:
February 16, 2021

INTEGRATED
POWER DESIGNS
300 Stewart Road
Wilkes-Barre, PA 18706 USA
Phone: [phone]
Web: www.ipdpower.com
Email: [e-mail]
Fax: [phone]
DRAWING NO: 1080054
REVISION: 5
CLASSIFICATION: 1. Protection against electric shock - Class I.
2. Protection against harmful ingress of particulate and water –IPX30.
3. Suitability for use in an oxygen rich environment - End user responsibility, not evaluated.
IMPORTANT SAFETY PRECAUTIONS:
•Only use an AC line cord with appropriate IEC320 connector and recommended DC output mating connector.
•Firmly connect AC line cord and DC power cord in place.
•Unit does not have any user-serviceable components. Do not open the device, or make any attempt to disassemble
or modify it.
•For indoor use only. Avoid placing this product in direct sunlight, or operating in temperatures below -20°C or
above 70°C.
•Position unit in well-ventilated area.
•Do not rest any object on the unit, or block the ventilation holes during operation.
•When in use, maintain horizontal position with rubber feet facing down onto a flat surface.
•Do not operate this product with damaged input/output cords or connectors.
•Insure that the supply voltage for this external power supply is within safe operating range, as shown in the
nameplate data label located on the bottom of the unit.
DISPOSAL:
DIMENSIONS:
CONNECTOR SPECIFICATIONS:
P1-Class I (AC Input)
IEC320-C14.
P1-Class I (Optional AC Input)
IEC320-C6.
P2 (DC Outputs 1-3)
Molex Mini-Fit Jr., 39-01-2145. Mates with 5559 Mini-Fit Jr. or equivalent housing with
5558 Mini-Fit or equivalent crimp terminal.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities instead . Contact your local authorities for information regarding the collection
systems available. Penalties may be applicable for incorrect disposal of this waste, in
accordance with your national legislation.