Intel IB868 User manual

IB868
Intel Pentium®MPICMG 1.3
SHB Express CPU Card
USER’S MANUAL
Version 1.0

ii IB868 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Pentium Mare registered trademarks of Intel
Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.

IB868 User’s Manual iii
Table of Contents
Introduction....................................................... 1
Product Description ..........................................................1
Checklist...........................................................................2
Specifications....................................................................3
Board Dimensions.............................................................4
Installations....................................................... 5
Installing the CPU.............................................................6
Installing the Memory.......................................................7
Setting the Jumpers...........................................................8
Connectors on IB868.......................................................11
BIOS Setup....................................................... 21
Drivers Installation...................................... 43
Intel Chipset Software Installation Utility........................44
VGA Drivers Installation.................................................46
AC97 Codec Audio Driver Installation............................48
LAN Drivers Installation.................................................49
Appendix........................................................... 51
A. I/O Port Address Map.................................................51
B. Interrupt Request Lines (IRQ) ....................................52
C. Watchdog Timer Configuration..................................53

iv IB868 User’s Manual
This page is intentionally left blank.

INTRODUCTION
IB868 User’s Manual 1
Introduction
Product Description
The IB868 PICMG1.3 SHB board incorporates the Mobile Intel® 915GM
Express Chipset for Embedded Computing, consisting of the Intel® 915GM
Graphic Memory Controller Hub (GMCH) and Intel® I/O Controller Hub 6-M
(ICH6-M), is an optimized integrated graphics solution with a 400 MHz and 533
MHz front-side bus.
The integrated 32-bit 3D graphics engine, based on Intel® Graphics Media
Accelerator 900 (Intel® GMA 900) architecture, operates at core speeds of up to
320 MHz. It features a low-power design, is validated with the Intel® Pentium® M
and Intel® Celeron® M processors on 90nm process. With two DIMM socket on
board, the board supports up to 2GB of DDR2 533 MHz system memory.
Intel® Graphics supports a unique intelligent memory management scheme called
Dynamic Video Memory Technology (DVMT). DVMT handles diverse
applications by providing the maximum availability of system memory for general
computer usage, while supplying additional graphics memory when a 3D-intensive
application requests it. The Intel GMA 900 graphics architecture also takes
advantage of the high-performance Intel processor. Intel GMA 900 graphics
supports Dual Independent Display technology.
The main features of the board are:
§Supports Pentium® M / Celeron® M processors
§Two DDR2 SDRAM DIMM, Max. 2GB
§Onboard 10/100 BaseT, optional Gigabit Ethernet
§Intel® 915 Express VGA for CRT / LVDS
§6x USB 2.0, 2x COM, Watchdog timer, Digital I/O
§Optional backplane with 3x PCI-E(x1), 1x PCI-E (x16), 4x PCI slots
§
Dimensions of the board are 338mm x 126mm.

INTRODUCTION
2IB868 User’s Manual
Checklist
Your IB868 Pentium MCPU card package should include the items
listed below:
•The IB868 CPU Card
•This User’s Manual
•1 IDE Ribbon Cable
•1 Floppy Ribbon Connector
•SATA Power Cord
•SATA Cable
•2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a
Mounting Bracket
•1 Y-Cable supporting a PS/2 Keyboard and a PS/2 Mouse
•1 CD containing the following:
•Chipset Drivers
•Flash Memory Utility
•Optional audio cable with bracket (Audio8K)
•Optional USB cable with bracket (USB2K-4)
•Optional backplane (IP380)

INTRODUCTION
IB868 User’s Manual 3
Specifications
Product Name IB868
Form Factor PICMG 1.3 SHB Express full size CPU card
CPU Type Intel Pentium M / Celeron M
CPU Voltage 0.700V~1.708V
System Speed Up to 2.26GHz
CPU FSB 400/533MHz FSB
Cache 2MB (Pentium M)/ 512KB(Celeron M) Level2 (CPU
integrated)
Green /APM APM1.2
CPU Socket Socket 479 or micro-FCBGA on board
Chipset INTEL 915GMChipset
GMCH:915GM1257-pin FCBGA
ICH6M:82801FBM609-pin mBGA
FWH
BIOS Award BIOS, support ACPI Function
Memory DDRII 533/400 DIMM x2 (w/o ECC function), Max. 2GB
VGA 915GMbuilt-in, supportsCRT
LVDS 915GMbuilt-in, supports 18+18 bits single or dual channel
LVDS
LAN 1. ICH6M built-in 10/100BT MAC + Intel 82562ET PHY
2. Marvell 88E8053 PCI Express Gigabit LAN controller x1
USB ICH6M built-in USB 2.0 host controller, support 6ports
Serial ATA ICH6M built-in SATA controller, supports 2ports
Parallel IDE ICH6Mbuilt-in one channel Ultra DMA 33/66/100 for HDDs
Audio ICH6M Built-in Audio controller + AC97 Codec ALC655
(Line-out, Line-in, Mic.)
LPC I/O W83627EHF: Parallel x1, COM1, COM2 (RS232), FDC
1.44MB,IrDA x1 & Hardware monitor (3 thermal inputs, 4
voltage monitor inputs, VID0-4, 3 Fan Headers)
Keyboard/Mouse Supports PS/2 Keyboard/Mouse connector
Edge Connector DB15 x1 for VGA
PS/2 Connector x1 for keyboard/mouse
RJ-45 x2 for 10/100 & Gigabit LAN
OnBoard
Header/Connector 40 pins box-header x1 for IDE1
34 pins box-header x1 for Floppy
26 pins box-header x1 for LPT
10 pins box-header x2 for COM1/2
8 (4x2) pins header x 3 for USB1~6
5 pins header x 1 for IrDA(cut pin2)
DF13 connector x2 for LVDS
12 pins header x1 for audio Line-Out, Line-In
& Microphone
4 pins header x1 for built-in speaker
SATA connector x2 for 2 SATA ports
Watchdog Timer Yes (256 segments, 0, 1, 2…255 sec/min)
Digital I/O 4 In / 4 Out
System Voltage +5V, +12V, 5VSB (2A)
Other Modem Wakeup, LAN Wakeup
Board Size 338mm x126mm
Golden Finger I/F
(Also Backplane Spec.) PCI w/ 4x PCImaster (Supports 4 PCI Slots)
3x (x1 PCIe slots)
1x (x16 PCIe slot)

INTRODUCTION
4IB868 User’s Manual
Board Dimensions

INSTALLATIONS
IB868 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the IB868 in order to set up a workable system. The topics
covered are:
Installing the CPU ............................................................................6
Installing the Memory.......................................................................7
Setting the Jumpers...........................................................................8
Connectors on IB868.....................................................................11

INSTALLATIONS
6IB868 User’s Manual
Installing the CPU
The IB868 board supports a Socket 479 processor socket for Intel®
Pentium®M or Celeron®M processors.
The processor socket comes with a screw to secure the processor. As
shown in the left picture below, loosen the screw first before inserting the
processor. Place the processor into the socket by making sure the notch
on the corner of the CPU corresponds with the notch on the inside of the
socket. Once the processor has slide into the socket, fasten the screw.
Refer to the figures below.
NOTE:
Ensure that the CPU heat sink and the CPU
top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.