intelliConsole IC200 User manual
Once you have connected your intelliConsole Controller, visit
our website to set up and use your new home automation
system: www.intelliconsole.com
Note
• Use the intelliConsole Controller in a cool, dry and
well-ventilated place out of direct sunlight.
• Ensure that the intelliConsole Controller will not be
disturbed and that all connections are snug and secure.
• The intelliConsole Controller is for indoor use only, and
contains no user-serviceable parts.
• For best results, plug the Insteon Interface directly
into a wall power outlet. Do not use a power strip or
AC line filter.
Troubleshooting
The Controller LED does not light up at all
Check that the power adapter is plugged into a working
power outlet and that the power adapter cable is securely
connected to the intelliConsole Controller.
The Controller LED does not stop flashing
Check that your internet connection is working and that the
network cable is securely connected to both your
intelliConsole Controller and your internet connection.
Need help?
intelliConsole Controller
Model IC200
Quick Start Guide
Congratulations on your purchase of an
intelliConsole home automation controller!
Follow these steps for a quick and easy
setup of your new controller.
WHAT'S IN THE BOX
Identify the following parts:
Internet
Cable
Power Adapter
intelliConsole
Controller
Insteon Interface
© 2016 intelliConsole (rev 03/16) intelliConsole and intelliConsole Controller are
trademarks of intelliConsole. Insteon is a registered trademark of SmartLabs, Inc.
Setup Guide
Use the provided internet cable to connect the
intelliConsole Controller to your internet connection,
which is usually a router or switch provided by your
internet service provider.
Connect the cable on the Insteon Interface to the
intelliConsole Controller, and plug the Insteon Interface
directly into a wall power outlet (110V).
Connect the cable on the provided power adapter to
the intelliConsole Controller, and plug the power
adapter into a power outlet (110V).
1
2
3
Router
Internet
Modem
That’s it! Your intelliConsole Controller will automatically
connect to the intelliConsole service. The green LED on the
front of the controller will flash while it is busy connecting,
and will stay steady once it has connected.
