Intenso POWERBANK A5200 User manual

Page 1of 8 EN
User Manual
POWERBANK A2600

Page 2of 8 EN
About this manual
Read this manual carefully and observe, read and follow all instructions
mentioned in this to ensure the long life and reliable use of the device.
Please keep this manual handy for future reference and pass it on to other
users of the device.
Intended use
This Powerbank is meant solely for the purpose of power supply to devices
with an operating voltage of 5V DC (mobile phones, MP3 player etc.). Any
other use is considered as unintended use and may lead to damages and
injuries. Claims of any type resulting from unintended use are ruled out.
To avoid dysfunctions do not connect the USB starting compound of the
device with the USB connections of computers of other devices. They are
only designed to charge devices.
Do not dissemble the device into its single parts and do not try to repair it. It
does not contain user serviceable parts and in this case the warranty
becomes void.
Do not enter objects which are not designed for use into the openings of the
product. There is a danger of short circuit.
Do not handle this device with wet hands.
Do not use water or chemical solutions to clean the device. Only use a dry
cloth.
It is normal that the device produces heat while used. Do not cover the
product while used.
Do not use the device if there is visible damage or in case it is wet.
Safety Instructions:
Operating conditions:
Operate the device at 0 to 40 degree Celsius at max.
90% relative humidity. If you do not use Powerbank for
long periods of time, store the device at a temperature
range of -10 to 45 degree Celsius at max. 90% relative
humidity (for short period) and charge the device every
three months to maintain the total performance of the
device.

Page 3of 8 EN
Do not use the device in extremely cold, hot, humid or
dusty areas; also do not expose to direct sunlight. Avoid
contact with open flame. Risk of Explosion!
Shock, drop:
Please protect the device against shock and drops in all
operating modes.
Electrostatic discharge:
This device is sensitive to electrostatic discharge. Please
protect the device against any possible electrostatic
discharge.
Disposal of old batteries
The devices marked with this symbol are subject to the
European Directive 2006/66/EG. All the old batteries
must be disposed separated from household garbage
through the government agencies designated for that
purpose.
By disposing the batteries in this prescribed manner,
you can avoid environmental damages.
Disposal of Used Electronic Equipment
Equipment marked with this symbol is subject to the
European Directive 2012/19/EG.
All electrical devices and used electrical equipment
must be disposed of separately from household waste
over the appropriate government agencies.
Proper disposal of old electronic equipment helps avoid
environmental damage.

Page 4of 8 EN
Scope of delivery
Intenso Powerbank A2600
Micro USB - Charging cable
Operating instructions
Technical data
Dimensions:
84 x 23 x 22 mm
Max power consumption (Input):
5 V 1 A
Max charging current output
(Output):
5 V 1 A
Internal Battery:
2.600 mAh / 3.7 V lithium-ion
battery
Status display:
4 LED lights
Built-in overcharge/discharge
protection
Yes
Standby time:
Up to 3 months
Device Overview
1 USB OUT
2 Function key
3 Status LEDs
4 Micro USB IN

Page 5of 8 EN
Operation
1. Function keys
By briefly pressing, the LED lights will indicate the current battery status
and the Powerbank is activated.
If no device is connected to the Powerbank, or the connected device is
fully charged, the Powerbank automatically switches to standby mode
after a time interval of 5 seconds.
2. Status display LED
The individual LEDs indicate the remaining energy of the Powerbank:
LED light
% - Energy
LED 1
LED 2
LED 3
LED 4
1 % - 25 %
●
○
○
○
26 % - 50 %
●
●
○
○
51 % - 75 %
●
●
●
○
76 % - 100%
●
●
●
●
3. Starting-Up / Powerbank Charge / Charging
Connected Devices
a) Charging the Powerbank
Please connect the included Micro USB cable to the micro USB port of the
Powerbank, and connect the other end of the USB cable to a standard USB
port of a computer or USB power adapter. The charging process and current
charging status is indicated by the LED status lights. If the Powerbank is fully
charged, the LED status lights remain illuminated. The required charging
time of the Powerbank depends on the selected charging source and the
output power (max. 5 V / 1 A).

Page 6of 8 EN
b) Charging devices through the Powerbank
Please connect the included USB cable to the USB A port on the
Powerbank and the other end of the USB cable to the micro USB port of
the device to be charged. Press the function button to start the charging
process.
Of course, you can also use your own USB charging cable to connect the
Powerbank with your device. Please note, however, that devices can be
charged only through the USB A port of the Powerbank.
If a device is charged with the Powerbank and the Powerbank has almost
reached its capacity limits, this is signalled by flashing of the last status
LED. Please charge the Powerbank again.
Please note that, when charging a device with a Powerbank nearly 30% of
total capacity is consumed by the charging process alone. This is caused
for example by the loss of power from circuit heat and voltage
conversion.
For optimal performance, the Powerbank must be used regularly. If this is
not the case, fully charge the Powerbank at least every three months.

Page 7of 8 EN
Limited warranty conditions
The warranty only covers the replacement of this Intenso product. The
warranty is not applicable for normal wear & tear resulting from
erroneous, improper use of the device, negligence, accident or
incompatibility.
There are no warranty claims if the Intenso user manual is not
followed and if the device is damaged through improper use or defects
caused by other devices.
We are not liable for damage or data loss (of the device to be charged)
caused by dysfunction, wrong handling, repairs or battery change
made by you.
There are no warranty claims if the product is exposed to shocks,
electrostatic discharges, heat or humidity effects beyond the product
specifications.
Intenso is not liable for any collateral damages or consequential
losses, for violation of warranty conditions or any other losses
irrespective of the cause.
Important note:
Please note that any warranty claim shall expire if the housing of the
Powerbank has been opened.
This product is not meant for a commercial use or for medical and
special applications, where the failure of the product may cause
injuries, death or significant material damages.

Page 8of 8 EN
Intenso Warranty conditions
Dear Intenso customer,
Thank you for opting for a high-quality Intenso product. All Intenso products are
subject to constant quality inspections and the legal warranty period applies, of
course, from the date of purchase. Please be sure therefore to save the sales
receipt as proof of purchase.
Warranty conditions
The warranty only covers material and production defects. Intenso GmbH is not
liable for the loss of data in units sent to us. The free of charge warranty service
covers the repair or replacement of defective parts. Please understand that we
cannot render any warranty services, e.g. in case of:
Misuse or improper handling, installation or use
Damages, scratches or wear
Modifications, manipulation or repairs by third parties
Damages through force majeure or transport
Your Intenso GmbH
CLAIM PROCEDURE
In case of a claim, please proceed as follows:
1. Only returns accompanied with all accessories and sales receipt are
accepted.
2. In addition, a RMA number is absolutely required for return
shipments. You can request this RMA number via e-mail or through
the service hotline.
3. Please package the product including all accessories and the sales
receipt safe for transport. Please stamp the package.
4. Please affix the RMA number clearly visible on the outside of the
package.
Please send to the following service address:
INTENSO GMBH Service Hotline: +49 (0) 900 –
1 50 40 30
Service Center (your RMA-No.) (0.39 € / min. from the
landline in Germany.
Kopernikusstraße 12-14 Usual costs apply.)
Email: [e-mail]
D-49377 Vechta Internet: www.intenso.de