R150 PLUS/300 PLUS/500 PLUS
REFERENCE AMPLIFIER
FEATURES SPECIFICATIONS
ELECTRICAL
·Frequency Response........................20Hz~20kHz(±0.5dB)
·T.H.D (20Hz~20kHz)...............................................≤0.05%
·Channel Separation (Half power 8Ω) ........................≥70dB
·Residual Noise ..........................................................≤80dB
·Signal to Noise Ratio...............................................≥100dB
·Input Sensitivity (Rated power into 4Ωat 1kHz).........0dBm
·Indicators......................Power(GREEN), Clip/Limiter(RED)
...........................................Signal(GREEN), Protection(RED)
·Protection
................Power ON/OFF muting, short circuit and thermal
GENERAL
·Power Source...............
100-120VAC or 220-240VAC; 50/60Hz
(Supplied AC mains transformer depends on country requirements)
·Power Consumption.................................R150 PLUS:1.5A
.....................................................................R300 PLUS:2.4A
.....................................................................R500 PLUS:3.9A
·Weight..........................................R150 PLUS:7.2kg/15.9Ib
.........................................................R300 PLUS:8.4kg/18.5Ib
.......................................................R500 PLUS:10.4kg/22.9Ib
·Dimensions.................................482(W)x88(H)x317(D)mm
...........................................................19(W)x3.5(H)x12.5(D)in
FEATURES SPECIFICATIONS
0dB=0.775Vrms
High-Performance rack mountable monitor amplifier.
4Ωstable per channel(stereo), 8Ωstable(bridge mono).
2U rack space.
Front panel indicators for signal strength, clip, protect,
and power.
Detachable AC power cord.
Output Connectors: Binding posts and Locking speaker
connectors.
Power Output Level
R150 PLUS R300 PLUS R500 PLUS
8Ω(Stereo) 50W 100W 170W
4Ω(Stereo) 75W 150W 250W
8Ω(Bridged Mono) 150W 300W 500W
