Interactive 4.5U User manual

3
13
6
4
10
11
5
7
8
9
1
12
2
PARTS
1
2
3
4
5
6
7
8
9
10
11
12
DESCRIPTION
BOTTOM PANEL
TOP PANEL
LEFT SIDE
RIGHT SIDE
REAR FRAME
FRONT FRAME
DOOR (GLASS)
DOOR (PERFORATED)
DOOR (SOLID)
M5 X 12 SCREWS (x8)
Assembly Instructions
Hold front frame 6 Vertically & slide in bottom panel 1
Place Sides 3 & 4 onto 1 and also slide into front frame 6
Place top 2 onto sides 3 & 4 & slide into front frame 6
Fit item 5 (rear frame) over items 1 2 3 4
Screw all together with M5 x 12 screws 10
Fit door by placing bottom door pin into item 1
Fit door top pin into item 2 by pulling spring catch
QUICK ASSEMBLY KNOCK DOWN WALL BOX
MOUNTING RAILS x 2
M6 Mounting screws (x4)
M8 RAWL BOLTS x 4
BEE
LEVEL 4
bsi.
ISO
9001:2015
Cert no. FS678923
UKAS
MANAGEMENT
SYSTEMS
Optional

TOP
BOTTOM
height
550 wide
FRONT
BACK
500 deep
SIDE
6u=351
9u484
12U=617
FEATURES
-PERFORATED FRONT DOOR
-25MMGLANDHOLES
-TOP BOT ACCESS HOLE
-ADJUSTABLE FEET
-HEAVY DUTY UPRIGHTS
-MODULAR STACKABLE

STACKABLE
3MM
UPRIGHTS

Assembly Note:
Please note the cabinets have been strictly engineered as follows
4.5U = 2 Pylontech Batteries
6U = 2 Pylontech Batteries
9U = 4 Pylontech Batteries
12U = 5 Pylontech Batteries
2 cabinets stacked at most, largest cabinet at the bottom.
Any damage due to over stacking will not be covered by warranty
*Should you find that the door pin does not fit due to the powder
coating, this is perfectly normal and requires minimal corrective effort.
Step 1 –Inspect pin on the door
Step 2- Clean
Please use a Flat nose Pliers or similar tool to remove the extra powder
coating from pin,

REG: 2004/020384/23
E-mail: [e-mail]
T: 011 433 1017 C: 082 292 8972 F: 0866 454 257
39 Giles Street, Robertsham, JHB 2091 P.O.Box 5304, Meyersdal, Alberton, 1447
This is achieved by gripping the pin and rotating in a circular motion,
The powder should come off with ease and the metal on the pin should now
be visible.
Well done, the door will now fit!