Intermec EasyCoder 501XP User manual

1
UBI EasyCoder 501 XP/601 XP
EasySet Bar Code Wand Setup
1. Connect the EasySet bar code wand to the
receptacle on the printer’s rear plate. 2. Read the appropriate bar code to set up the printer. Hold the wand like a pencil and move
it rather swiftly across the bar code.
3. When the bar code has been accepted, the
printer emits a short beep and the Ready
controllampon the printer’s frontblinks brie-
fly.
4. This sheet only contains a selection of setup
options. For information on how to produce
your own setup bar codes, please refer to the
UBI Fingerprint 7.1 Reference Manual.
Serial Communication on ”uart1:”
Baudrate
1-960438-00 EasySet Bar Code Sheet for EasyCoder 501XP/601 XP, Edition 1, July 1997
®®
LISTED65B5
C
UBI PRINTER AB MADE IN SWEDEN
100-240V 2.5/1.2A 50-60Hz
Type
Model #
Serial #
501 XP
1-501011-45
012345
Connect here!

2
Serial Communication on ”uart1:”, cont’d.
No. of Stop Bits
RTS/CTS
ENQ/ACK
XON/XOFF, Data to Host
Reset comm. to default
Parity
Char. Length

3
Start- and Stopadjust
Cut between labels
Tear Off Paper Strip Peel Off
Cut var. length strip
Media
Contrast
XON/XOFF, Data from Host
New Line
Serial Communication on ”uart1:”, cont’d.

4
Media, cont’d.
Media Width
Media Length

5
Media, cont’d.
Print Speed
Test Labels
MediaType
Media Length, cont’d.

6
Direct Thermal Printing
Thermal Transfer Printing
PaperType