Intermec IV6 User manual

Quick Start Guide
IV6 Portable
Reader

2 IV6 Portable Reader
Intermec Technologies Corporation
Corporate Headquarters Technical Communications
6001 36th Ave. W. 550 Second Street SE
Everett, WA 98203 Cedar Rapids, IA 52401
U.S.A. U.S.A.
www.intermec.com
The information contained herein is proprietary and is provided
solely for the purpose of allowing customers to operate and
service Intermec-manufactured equipment and is not to be
released, reproduced, or used for any other purpose without
written permission of Intermec.
Information and specifications contained in this document are
subject to change without prior notice and do not represent a
commitment on the part of Intermec Technologies Corporation.
E2003-2005 by Intermec Technologies Corporation. All rights
reserved.
The word Intermec, the Intermec logo, Norand, ArciTech,
CrossBar,DataCollectionBrowser,dcBrowser,Duratherm,
EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder,
Fingerprint, i-gistics, INCA (under license), InterDriver,
Intermec Printer Network Manager, IRL, JANUS, LabelShop,
Mobile Framework, MobileLAN, Nor*Ware, Pen*Key,
Precision Print, PrintSet, RoutePower, TE 2000, Trakker
Antares, UAP, Universal Access Point, and Virtual Wedge are
either trademarks or registered trademarks of Intermec
Technologies Corporation.
Throughout this manual, trademarked names may be used.
Rather than put a trademark (™or ®)symbolinevery
occurrence of a trademarked name, we state that we are using
the names only in an editorial fashion, and to the benefit of the
trademark owner, with no intention of infringement.
Microsoft, Windows, and the Windows logo are registered
trademarks of Microsoft Corporation in the United States
and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

3
IV6 Portable Reader
There are U.S. and foreign patents pending. This paroduct is
covered by one or more of the following patents:
4,360,810 4,739,328 4,786,907 4,864,158
4,888,591 4,999,636 5,030,807 5,055,659
5,280,159 5,504,485 5,521,601 5,550,547
5,673,037 5,763,867 5,777,561 5,825,045
5,828,318 5,828,693 5,850,181 5,850,187
5,942,987 5,995,019 6,078,251 6,121,878
6,122,329 6,172,596 6,195,053 6,249,227
6,280,544 6,286,762 6,286,763 6,288,629
6,360,208 6,384,712 6,404,325 6,429,775
6,486,769 6,501,807 6,525,648 6,639,509
6,645,327 6,677,852 6,768,414 6,784,789
6,816,063

4 IV6 Portable Reader
Packing List
Ensure you have received these items:
SIV6 Portable Reader Quick Start Guide
STwo band clamps
SWarranty card
SCompliance statement
Introduction
The Intellitag IV6 Integrated Portable Reader Antenna provides
the option for serial RS-232 and Bluetooth communications.
Host Requirements
Operating System Support
Microsoft Windows 98 or greater. This requires that Micro-
soft Foundation be installed. Microsoft Foundation files can
be located at http://www.microsoft.com. Once configured
your IV6 Portable Reader also works in Windows 95.
Compiler Support
MS-DOS Development
SMicrosoft C compiler version 6.0 or greater
SBorland C ++ compiler version 4.5x or greater
DOS API Library Names (p/n A110015-01) are:
S<rfidl.lib> for large model development
S<rfidh.lib> for huge model development
Microsoft Windows Development
SIDK Kit ITRK915001, includes all necessary software, 915
MHz reader, training and documentation.
Minimum Hardware Requirements for Target Device
S640K RAM
SMinimum Intel 386 compatible processor

5
IV6 Portable Reader
General Requirements
This product conforms to government
regulations. The user(s) of this product are
cautioned to use power sources, accessories and
peripherals approved by Intermec Technologies
Corporation. The use of power sources and
accessories other than those recommended, or
changes to this product that are not approved by
Intermec Technologies Corporation, may void the
regulatory compliance of this product and may
result in the loss of the users authority to operate
the equipment.
Power Requirements
Your IV6 Portable Reader is powered by an external DC power
applied to a dedicated connector. The IV6 can only be used
with UL approved limited power supply (p/n: 851-070-001)
and power cable kit (p/n: 203-714-001)
The external DC power configuration is intended to support
primarily mobile applications for the IV6 Reader where no
cabled network connection is possible.
External DC Power
Input Current 1 Amp max.
Input Voltage 12V DC +/- 10%
Output Voltage 12V @ 250 mA max.

6 IV6 Portable Reader
IV6 Reader LEDs
Review the front panel LEDs to become familiar with the status
indications you will receive from your Reader.
Auxiliary I/O connector
LEDs position
(lefttoright)1,2,3,4,5
Mounting bracket(s)
oneoneachend
IV6 Fixed Reader LED Explanation
LED Meaning
1IRI (Blue)
Off -Default state, unit is not ready to operate. Either because it
does not have power or fails internal checks.
Blink - Unit ready but not connected to system.
On - System OK, Ready.
2Power Indicator (Green) On if Reader has appropriate external
power and all internal supplies are functional.
3HostCommunications(Green)Blinksonwheneverdataisde-
tected on the host interface.
4RF Power (Green) LED is ON whenever the module is providing
RF power.
5Tag Identification (Green) LED blinks ON when a valid tag is
detected.

7
IV6 Portable Reader
Installation
Your IV6 Portable Reader can be installed using several options.
For example, you can use band straps and mount it to the front
of the fork lift, or to the side of the beams supporting the lift
mechanism. The illustration below shows placement in some
typical configurations.
Installation Guidelines
Note: RF safety regulations require a 20 cm (8 in)
distance from the antenna to any persons body or
head. Do not touch the antenna while the transmit-
ter is powered. Regulations do not allow co-location
with other transmitters.
1Position your Reader to ensure it will get the best read rate
possible for your situation.
2Attach your Reader to the bracket using band clamps. Attach
one band to each mounting bracket.
IV6 Reader
IV6 Reader
IV6 Reader

8 IV6 Portable Reader
RFID Performance
RFID Tag Depth of Field
The read range is dependent upon the type of tag and the trans-
mitted output power, besides many other factors. The tag rates
containedinthisdocumentarewhatcouldbeexpectedusinga
theoretical free-space dipole tag at 915 MHz under U.S. FCC
Part 15 rules and regulations.
Typical Read and Write Range
SRead Range: 6-10 feet
SWrite Range: Writing distances are 60% of the read distance
under the same conditions.
Environmental Specifications
Operating Temperature -20°Cto+55°C(-4°F to +131°F)
Storage Temperature -30°C to +70°C(-22°F to +158°F)
Thermal Shutdown 70°C (158°F) measured on the power amplifier
Thermal Cycle -20°Cto+50°C(-4°F to +122°F) ramp 5°C/
min.
Thermal Shock
Non Operating
-30°C to +70°C(-22°F to +158°F)
ramp 30°C/min.
Humidity, Storage and Op-
erating
5% to 95% PH Non-condensing
Moisture Resistance IP65 Compliant
Dust Resistance IP65 Compliant
UV Radiation ETSI EN 300 019-1-4 Class 4E
Solar ETSI EN 300 019-1-4 Class 4E
Quasi-Random Vibration Quasi-Random 20 G’s RMS for 4 hours.
Shock 10g, 11ms, 1/2 Sin, (operating)
Vibration 1.0 GRMS., 10 to 500 Hz, 3 axis (operating)
Mechanical Shock 10 G, 11 msec, half sine pulse (operating)

9
IV6 Portable Reader
Safety and Regulatory Approvals
Safety IEEE 95.1 RF Safety Requirements. Approved to
UL 60950, CE, Cenelec 210 and 211 safety re-
quirements. UL listed, C22.2 No 950/ UL
60950. FCC Electromagnetic Fields per Bulletin
65. Health Canada, Safety Code 6.
Electromagnetic Emissions FCC Part 15, Class A - verified EN 55022,
Industry Canada ICES-003
High Efficiency Fluorescent Reader will read at 150 V/m at 25 KHz.
Radiated Immunity EN 55024
Radio Standards FCC 15.247
Industry Canada RSS-210
Portable Reader Specifications
915 MHz Antenna Specifications
Frequency Range 902-928 MHz
Impedance 50 ohms
VSWR <1.3:1
Polarization Circular
Front-to-Back Ratio >30 dB
Maximum Input Power 1wattat50°C
Far Field 3 dB Beam-
widths (Nominal)
70°x 35°
Mounting Hardware Band Clamps

10 IV6 Portable Reader
General Purpose I/O
Your IV6 Portable Reader supports a GPIO interface that con-
sists of an industrial circular style female connector supporting
the interface to industrial type controls. The interface includes:
STwo optically isolated inputs.
STwo optically isolated low voltage DC outputs.
SAccess to 12 V DC to power external relays for the control of
AC loads, indicators, or other devices requiring up to 250
mA maximum current.
A cable assembly, Intermec part number 236-040-001 is re-
quired for use with the industrial circular style connector. The
individual wires in the cable are color coded as indicated in the
GPIO Pin Function/Assignment Table. The cable drain wire
corresponds to the “PE” contact of the connector.
GPIO Pin/Function Assignment Table
Pin # Function Active Polarity Cable Color
16 INPUT-1P High 10-48V Orange/White
14 INPUT-1N Low-RTN Brown/White
13 INPUT-2P High 10-48V Black/White
12 INPUT-2N Low-RTN Light Green
15 12 Volt OUTPUT-1 Red/White
4OUTPUT-1 RETURN Orange
6OUTPUT-1P High 0-12V Green
5OUTPUT-1N Low-RTN Yellow
17 12 Volt OUTPUT-2 Black/Yellow
11 OUTPUT-2 RETURN Pink
9OUTPUT-2P High 0-12V Gray
10 OUTPUT-2N Low-RTN White
1RS232 TX Black
2RS232 RX Brown
3RS232 RTN Red
812 Volt INPUT Purple
7INPUT RETURN Blue