Intermec Oracle-Ready CK31 User manual

Oracle®-Ready
CK31 Handheld
Computer
Quick Start Guide

ii Oracle-Ready CK31 Handheld Computer Quick Start Guide
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is proprietary and is provided
solely for the purpose of allowing customers to operate and
service Intermec-manufactured equipment and is not to be
released, reproduced, or used for any other purpose without
written permission of Intermec.
Information and specifications contained in this document are
subject to change without prior notice and do not represent a
commitment on the part of Intermec Technologies Corporation.
©2005 by Intermec Technologies Corporation. All rights
reserved.
The word Intermec, the Intermec logo, Norand, ArciTech,
CrossBar, Data Collection Browser, dcBrowser, Duratherm,
EasyADC, EasyCoder, EasyLAN, Enterprise Wireless LAN,
EZBuilder, Fingerprint, i-gistics, INCA (under license),
Intellitag, InterDriver, Intermec Printer Network Manager, IRL,
JANUS, LabelShop, Mobile Framework, MobileLAN,
Nor*Ware, Pen*Key, Precision Print, PrintSet, RoutePower,
SmartSystems, TE 2000, Trakker Antares, and Virtual Wedge
are either trademarks or registered trademarks of Intermec
Technologies Corporation.
Throughout this manual, trademarked names may be used.
Rather than put a trademark (™or ®) symbol in every
occurrence of a trademarked name, we state that we are using
the names only in an editorial fashion, and to the benefit of the
trademark owner, with no intention of infringement.
Bluetooth is a trademark owned by Bluetooth SIG, Inc., USA.
There are U.S. and foreign patents pending.
Microsoft, Windows, and the Windows logo are registered
trademarks of Microsoft Corporation in the United States
and/or other countries.

Oracle-Ready CK31 Handheld Computer Quick Start Guide iii
Contents
Unpacking the Oracle-Ready CK31..................................... 5
What is the Oracle-Ready CK31? ........................................ 5
Installing and Charging the Battery ..................................... 7
Turning on the CK31 and Finding the Keys........................ 8
Using the Keypad ................................................................ 8
Configuring the CK31......................................................... 9
Using TE 2000 on Your CK31.......................................... 10
Troubleshooting ................................................................ 11
Scanning a Bar Code With ScanDemo .............................. 12
Keyboard Shortcuts ........................................................... 13
Where to Go From Here ................................................... 14
Specifications..................................................................... 15

iv CK31 Oracle-Ready Handheld Computer Quick Start Guide

Oracle-Ready CK31 Handheld Computer Quick Start Guide 5
Unpacking the Oracle-Ready CK31
After you unpack the Oracle®-Ready CK31 from its shipping
box, save the box and packing material in case you need to ship
or store the computer.
The CK31 shipping box contains these items:
13KC
CK31 Handheld
Computer
Stylus (installed)
AB1G battery
Documentation
CK31 Handheld Computer
Quick Start Guide
Laser labels
(with laser scanner only)
You should read this quick start guide if you are a system
administrator or a person installing the CK31 in a network. If
you want basic information, such as changing the beeper
volume, see the CK31 Handheld Computer Operator’s Guide
(P/N 075388).
What is the Oracle-Ready CK31?
The Intermec Oracle-Ready CK31 Handheld Computer is an
ergonomically designed handheld computer built on the
Microsoft®Windows®CE.NET operating system. The Oracle-
Ready CK31 with TE 2000 is configured to work out of the box
with your Oracle server.

6 Oracle-Ready CK31 Handheld Computer Quick Start Guide
13KC
Ready-to-Work
indicator (blue)
Good Read
light (green)
Touch screen
User-defined
lights
Scan
button
Serial
port
Battery
Battery
light
CK31 Handheld Computer: Use this illustration to understand the features
of the CK31.
The CK31 makes data collection easy and includes these
features:
•802.11b/g radio (optional)
•Bluetooth™ (optional)
•.NET Compact Framework
•Color display with touch screen
•64MB flash/64MB RAM memory
•400 MHz processor
•2D area imager, 1D linear imager, or laser scanner

Oracle-Ready CK31 Handheld Computer Quick Start Guide 7
Installing and Charging the Battery
Make sure you fully charge the battery before you use your
CK31.
To charge and install the battery
1Charge the CK31 battery in one of these two ways:
•Place the battery in the AC1 4-Slot Battery Charger.
•Place the CK31 (with battery installed) in the AC2 4-Bay
Charging Dock, AC3 8-Bay Charging Dock, AD1 1-Bay
Communications Dock, or AD2 4-Bay Communications
Dock.
Battery latch
AB1G
battery
2Insert the tabs on the bottom of the charged battery into the
CK31 and snap the battery into place.
The battery light on the CK31 blinks three times and the
CK31 turns on.

8 Oracle-Ready CK31 Handheld Computer Quick Start Guide
Turning on the CK31 and Finding the Keys
The CK31 can have a 52-key full alphanumeric keypad, a 50-
key full alphanumeric keypad, or a 42-key large numeric and
function keypad. Use this illustration to locate some of the
important keys on your CK31. The Power (I) key may be
located in one of two places depending on the keypad option of
your CK31: the upper left corner or the middle of the bottom
row. The 42-key keypad is very similar to the 52-key keypad.
Use the 52-key keypad illustration below for reference if you
have a 42-key keypad.
H o m e
D e l
F 7 F 8 F 9
F 6 F 5
F 4
F 1
F 2
F 3
S pace
F 10
I
n s
C A P S
A l t
?
“
‘
+
/
\
¦
.
PROG
{}
*
[]
Power
key
Green
key
Backspace key
Backlight
key
Orange
key
789
12
0
.
3
456
F 1
F 2
F 3
F 4
A B CD E
F G HI J
K L MN O
P Q R S T
U V W Y
Esc
I/ O
Alt
Ta b
Orange
key
Green
key
Backlight
key
Power
key
50-key keypad 52-key keypad
Using the Keypad
Each keypad available for the CK31 provides color-coded keys
to let you access additional characters, symbols, and functions
printed on the keypad overlay. Once you understand how to use
the color-coded keys and key sequences, you will know how to
access all of the additional features printed on the keypad
overlay. Make sure you press and release the first key before you
press the second key to access the color-coded character or
function printed above a key.

Oracle-Ready CK31 Handheld Computer Quick Start Guide 9
Understanding How to Use the Color-Coded Keys
You Want To: Press:
Use an orange character or
function printed above a key
Orange Bkey and then the key
with character or function
printed above it
Use a green character or
function printed above a key
Green Ckey and then the key
with character or function
printed above it
Use a blue character printed on
a key (42-key and 50-key
keypads only)
Shift key and then the key with
the blue character printed on it
Lock the orange, green, Ctl,
Alt, or Shift key to stay on
B, C, Ctl, Alt, or Shift key
twice
Unlock a green, orange, Ctl,
Alt, or Shift key
B, C, Ctl, Alt, or Shift key
once
Configuring the CK31
After the CK31 finishes booting up for the first time, the Setup
Assistant appears. Follow the directions on the Setup Assistant
screens to quickly configure the time and date and the other
parameters necessary to connect the CK31 to your network.
Setup Assistant Start Screen

10 Oracle-Ready CK31 Handheld Computer Quick Start Guide
If you need to set additional parameters or change any
parameters you set with the Setup Assistant, you can use the
Intermec Settings application.
To open Intermec Settings
•Go to Start > Intermec Settings.
For help loading your application on the CK31, see the CK31
Handheld Computer User’s Manual (P/N 075207).
Using TE 2000 on Your CK31
After you exit the Setup Assistant, the CK31 automatically
launches the TE 2000 application. Once the CK31 connects to
its TE 2000 host, the Intermec Ready-to-Work™ indicator
turns on solid blue.
To connect to the Oracle server
1Tap in the lower right corner of the screen and select
TE2000 Menus. The TE 2000 Main Menu appears.
2Tap Set-up Parms and type CR52401 at the Enter Password
prompt.
3From the Set-up Parms menu, go to Communication >
Direct > Host Setup > Host A.
4Type the IP address of your host and then press Enter. You
can enter up to 64 alphanumeric characters.

Oracle-Ready CK31 Handheld Computer Quick Start Guide 11
5Type the port number that the Oracle host uses and press
Enter. The port number you use should be specified by the
Network Administrator.
6From the Emulation menu, tap the TE 2000 emulation mode
you want to use.
7Press Enter until you return to the Main Menu and then tap
Exit Menus.
8Press Y and then type cr52401 at the Enter Password
prompt to return to the TE 2000 main screen.
The TE screen now displays your new TE 2000 choice and you
are connected to the Oracle server.
Troubleshooting
Use the next table to help troubleshoot some common problems
you may experience with the CK31.
Problem Possible Solution
You press Ito turn on the
CK31 and nothing happens.
The battery may be discharged.
Replace the battery with a spare
charged battery or charge the
battery and try again.
Make sure the backlight is turn
on. Press E.
You see a battery critically low
( ) icon on the status bar.
Replace the battery immediately
with a fully charged battery or
place the CK31 with the battery
installed in a communications or
charging dock.
You use your stylus to tap the
screen and nothing happens.
Recalibrate your touch screen.
To open the calibration
application, go to Start > Touch
Calibrate. Follow the directions
on the screen.

12 Oracle-Ready CK31 Handheld Computer Quick Start Guide
Troubleshooting (continued)
Problem Possible Solution
You are using an 802.11b/g
radio and the no connection
to the network icon ( )
appears on the status bar.
•Make sure the network name
(SSID) on the CK31 is the
same as the network name of
the access point you are trying
to communicate with.
•Make sure the CK31 is within
range of an access point.
•Make sure the CK31 has been
configured correctly for your
network. The radio and
wireless security parameters on
the CK31 must match the
values set for all access points
in your network.
For more troubleshooting information, see your CK31 Handheld
Computer User’s Manual.
Scanning a Bar Code With ScanDemo
Use the ScanDemo application to see how the imager or scanner
in your CK31 works. If you have a 2D imager, you can hold
your CK31 in any orientation (360°) while scanning bar codes
and read the symbologies.
To scan a bar code with ScanDemo
1From the CK31 desktop, double-tap the ScanDemo icon.
The ScanDemo application opens on your desktop.
2Press the Scan button on the keypad, or pull the trigger on
the handle, and center the read aiming beam over the bar
code label.
When the CK31 successfully read a bar code label, you hear a
high beep and the green Good Read light turns on briefly.
3Release the Scan button or the trigger.

Oracle-Ready CK31 Handheld Computer Quick Start Guide 13
Keyboard Shortcuts
Use the following table to learn keyboard shortcuts for certain
functions in your Oracle-Ready CK31. You can also use the
labels included with this guide to create a bar code quick
reference card.
Key Function Description
F1 Help Displays the keys that functions are mapped
to. Press F3 to exit this screen.
F2 Menu Returns to the last menu and cancels
transactions that have not been committed.
F3 Back Returns to previous page displayed within a
transaction. Also exits from the Help Menu.
F4 Forward Goes to next page displayed within a
transaction.
Esc Hot Key Enables the button to be pressed from
anywhere on the page with a button’s
accelerator key.
Ctl-A Show Field Displays the current field on the entire page
if the field runs off the screen.
Ctl-B Message Displays the long descriptions of a message
that appears on the status bar.
Ctl-C Page Down Displays the next page down on the screen.
Ctl-D Page Up Displays the next page up on the screen.
Ctl-F Flex Popup Displays the segment by segment entry
screen for a key flexfield on the mobile user
interface.
Ctl-G Generate Creates a new number for particular fields in
Inventory and WMS, such as lot number,
serial number, and license plate number.
Ctl-K Clear Clears input from the field.
Ctl-L LOV Displays a list of validated values for a field.

14 Oracle-Ready CK31 Handheld Computer Quick Start Guide
Keyboard Shortcuts (continued)
Key Function Description
Ctl-N Main Menu Returns to the main menu of a responsibility
and cancels transactions that have not been
committed.
Ctl-S Skip Task Skips the current task on the task page.
Ctl-X About Displays the About page that lists details
about the current connection that may be
useful for solving problems.
Ctl-Z Toggle Toggles between options in a list field.
Where to Go From Here
Now that the Oracle-Ready CK31 is working in your network,
you may need additional information to use the computer in
your data collection system. Use this table to see which
documents are available on the Web, in print, or on CD.
Document Web Print CD
CK31 Handheld Computer User’s Manual 99
TE 2000 Terminal Emulation
Programmer’s Guide
99
Intermec Developer’s Toolkit (includes
SDK and PSK)
99
Go to the Intermec web site at www.intermec.com to find PDF
files of the documents. If you experience any problems, please
visit our product support web site at intermec.custhelp.com to
search for product specific information. To order accessories and
printed documentation, contact your local Intermec sales
representative.

Oracle-Ready CK31 Handheld Computer Quick Start Guide 15
Specifications
Physical Dimensions
Length: 23.4 cm (9.22 in)
Width: 9 cm (3.54 in)
Depth: 5.3 cm (2.07 in); 6.6 cm (2.6 in) with a large case
Weight: 590 g (20.8 oz)
Power Specifications
Operating: Rechargeable 2400 mAh lithium-ion battery
Backup: Super Cap supplies 10 minutes bridge time while
replacing the main battery
Electrical Specifications
Models: CK31
Electrical rating: x7,4 to 12; 500 mA peak
Temperature and Humidity Specifications
Operating temperature: -20°C to 50°C (-4°F to 122°F)
Operating humidity: 5 to 95% non-condensing
Storage temperature: -20°C to 60°C (-4°F to 140°F)
Storage humidity: 0 to 95% relative humidity, non-
condensing
Patent Information
This product is protected by one or more patents. Refer to the
CK31 Handheld Computer User’s Manual (P/N 075207) for the
list of patents.

6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel [phone]
fax [phone]
www.intermec.com
©
2005 Intermec Technologies
Corporation. All rights reserved.
Oracle-Ready CK31 Handheld Computer Quick Start Guide
*910-911-001*
P/N 910-911-001 Rev A