Intermec Microbar 9730 User manual

MicroBar

9730 Decoder

Getting Started Guide

Guide de démarrage

Leitfaden «Wie starte ich»

Guía de inicio

Guida introduttiva

Start Guide

P/N 0-230049-01

This guide contains the minimum set-up information for the most common host terminals. The full list of set-up

commands can be found in the EasySet set-up software on the CD ROM (enclosed) or in the MicroBar 9730

Installation Manual (available on the CD ROM or to order). EasySet PC Windows software allows the set-up

commands to be printed as set-up bar codes or to be downloaded using a special configuration cable. When installing

and turning on the MicroBar 9730, ensure that the host system is turned off before connecting the cables. Follow these

steps: 1.Turn system power off. 2.Connect devices (input and terminal). 3.Turn system power on. 4.Scan terminal

type. 5.Select symbology. 6.Test.

Démarrage

Ce guide contient le minimum d'informations nécessaires à la configuration de votre produit pour les terminaux hôtes

les plus courants. Vous trouverez l’ensemble des commandes de configuration dans le logiciel EasySet fourni sur le

cd-rom et dans le manuel d'installation MicroBar 9730 (également fourni sur le cd-rom ou document papier à

commander). EasySet fonctionne sous Windows pour PC. Avec EasySet vous pouvez imprimer les commandes de

configuration sous la forme de codes à barres ou les télécharger directement dans votre produit à travers un cable

spécial de configuration. Quand vous installez votre produit, assurez-vous que le système hôte est éteint avant de faire

les branchements. Suivez ces étapes : 1.Eteindre le système. 2.Brancher dispositifs de lecture et terminal. 3.Allumer

le système. 4.Lire le type de terminal. 5.Choisir vos symbologies (types de codes à barres). 6.Tester.

Was zunächst zu tun ist...

Dieser Leitfaden beinhaltet die wichtigsten Konfigurationsinformationen für die gebräuchlichsten Host Terminals.

Die komplette Liste der Konfigurationsbefehle finden Sie in der EasySet-Konfigurationssoftware auf dem beigefügten

CD ROM oder im MicroBar 9730 Installationshandbuch, das ebenfalls auf dem CD ROM abrufbar oder auf

Bestellung erhältlich ist. Die für Windows PC konzipierte Software EasySet ermöglicht es, Konfigurationsbefehle in

Form von Einstellungs-Barcodes auszudrucken oder sie mit Hilfe eines speziellen Konfigurationskabels

herunterzuladen. Stellen Sie bei der Installation des MicroBar 9730 sicher, daß das Hostsystem ausgeschaltet ist,

bevor Sie die Kabel anschließen. Gehen Sie folgendermaßen vor: 1. Das System abschalten. 2. Peripheriegeräte

(Eingänge und Terminal) anschließen. 3. Das System einschalten. 4. Terminaltyp erkennen. 5. Die Barcodes

auswählen. 6. Testen.

Para commenzar...

Esta guía contiene la información mínima que permite configurar los terminales host más comunes. Una lista

completa de comandos de configuración se encuentra en el software de configuración EasySet en CD ROM (incluido),

o en el manual de instalación MicroBar 9730 (disponible en CD ROM o bajo pedido). El software Windows PC

Easyset permite imprimir los comandos de configuración en formato código de barras, o telecargarlos utilizando un

cable de configuración especial. Cuando instale el MicroBazr 9730, cerciórese de que el sistema host se encuentra

apagado antes de conectar los cables; siga las etapas siguientes: 1. ponga el sistema fuera de servicio. 2. Enchufe los

periféricos (entradas y terminal). 3. Ponga el sistema en funcionamiento. 4. Lea el tipo de terminal. 5. Seleccione el

tipo de simbología. 6. Haga una prueba.

Prima di iniziare...

Questa guida contiene le informazioni essenziali che consentono di configurare i più comuni terminali ospiti. L’elenco

completo dei comandi di configurazione si trova all’interno del software EasySet su CD ROM (in dotazione) oppure

nel Manuale d’Installazione del MicroBar 9730 (disponibile su CD ROM o su ordinazione). Il software EasySet per

Windows PC consente di stampare i comandi di configurazione sotto forma di codici a barre di configurazione oppure

di scaricarli utilizzando un apposito cavo di configurazione. Al momento dell’installazione del MicroBar 9730, prima

di collegare i cavi, accertarsi che il sistema ospite non sia alimentato. Attenersi alla seguente procedura: 1. Spegnere

l’alimentazione del sistema. 2. Collegare le periferiche (input e terminale). 3. Alimentare il sistema. 4. Procedere ad

una lettura del tipo di terminale. 5. Selezionare le simbologie che si intendono utilizzare. 6. Testare il sistema.

Komma igång

Denna guide innehåller information för hur du installerar MicroBar 9730 för de vanligaste datorerna. En komplett

förteckning uppsättningsparametrarna hittar du i EasySet programvaran på CD-ROM skivan eller i MicroBar 9730

Installations manual (tillgänglig på CD-ROM skivan eller via separat beställning). EasySet är en Windows™ baserad

PC programvara som möjliggör antingen en utskrift av en streckkodsmeny.med uppsättningsparametrarna så du lätt

kan scanna in rätt konfigurering, du kan även ladda ner rätt konfigurering med hjälp av en speciell

konfigureringskabel. När du installerar MicroBar 9730 skall din dator vara frånslagen. Du installerar på följande sätt.

Steg 1- Stäng av strömmen. 2- Koppla upp anordningen. 3- Sätt på strömmen. 4- Scanna streckkoden för aktuell dator.

5- Välj rätt typ av symbologi (streckkod). 6- Testa.

Manual

Getting Started

EasySet

1. Connect Input Device

RS-232 TTL

RS-232 C

0OFF

1System power OFF

Keyboard Wedge, 2 cables

DIN/mini-DIN adapter cable

(standard wedge only)

System power ON

0OFF

2. Connect to Terminal

@@?@e@?e?@e@?@@f@?e?@@??@?@e@??@@?e@?e@@e@??@?@@@@?e@?@??@@??@@@?@@?e@@@?@?@@

QWERTY English (200)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@??@@?e@?@@e@@@??@?@@@@?e@?@@?@@?@@e?@@?e@@@?@?@@

German (204)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@??@@?e@??@@??@@@?@?@@@@?e@?@?e@@e?@?@@?e@@@?@?@@

QWERTY Italian (206)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@??@@?e@@e@??@e?@?@@@@?e@?@@e@@@??@?@@?e@@@?@?@@

AZERTY French (201)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@??@@?e@??@@?@@@??@?@@@@?e@?@?e@?@@e?@@?e@@@?@?@@

QWERTY Swedish/Finnish (205)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@??@@?e@?@@@??@@??@?@@@@?e@?@?@@?@@@e?@@?e@@@?@?@@

QWERTY Norwegian (207)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@??@@?e@??@@@e@@?@?@@@@?e@?@@e?@?@@@?@@?e@@@?@?@@

QWERTY Spanish (209)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@??@@?e@??@@@?@@??@?@@@@?e@?@?@@@?e@@?@@?e@@@?@?@@

QWERTY Danish (208)

@@?@e@?e?@e@?@@f@?e?@@??@?@@?@@e?@@?@?@@e?@e?@?@@@@?e@?@??@e?@@??@@?e@@@?@?@@

QWERTZ Swiss/French (2020)

Scan terminal type (PCs and compatibles)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@@e@?e@@@??@e@@?@?@@@@?e@?@?@@@@?@e?@@?e@@@?@?@@

QWERTY PC type

@@?@e@?e?@e@?@@f@?e?@@??@?@e@@e@?e@@@?@@e@??@?@@@@?e@?@?@@@?@@@@?@@?e@@@?@?@@

AZERTY PC type

Keyboard Wedge, Y cable

System power ON

Scan terminal type (DEC 220/320/420)

@@?@e@?e?@e@?@@f@?e?@@??@?@e@@e@?e@@?@@?@@e?@?@@@@?e@?@?e@@e@??@@?e@@@?@?@@

QWERTZ PC type

@@?@e@?e?@e@?@@f@?e?@@??@?@e@@e@?e@@?@@?e@@?@?@@@@?e@?@?@@e@@@??@@?e@@@?@?@@

QWERTY PC type Swedish/Finnish

Plug in power supply

Connect cables

Direct RS-232 Terminal

@@?@e@?e?@e@?@@f@?e?@@??@?@@??@@?@@e@?@@e?@e?@?@@@@?e@?@??@@@e@@?@@?e@@@?@?@@

RS232 C (9600, 7, E, 2)

System power ON

Scan terminal type

Dual RS-232 Terminal

@@?@e@?e?@e@?@@f@?e?@@??@?@@??@@?@@e@?@@e?@e?@?@@@@?e@?@??@@@e@@?@@?e@@@?@?@@

RS232 C (9600, 7, E, 2)

Scan terminal type

System power ON

Activate Code Test Code

@@?@e@?e?@e@?@@f@@f@??@?@?@@@@?e@?@?@?@@@@e?@@?e@@@?@?@@

Disable all Symbologies

@@?@e@?e?@e@?@@f@@e@?@?e?@?@@@@?e@?@?e@?@@@@?@@?e@@@?@?@@

Code 39 (*)

UPC/EAN

UPC-A, UPC-E, EAN-8, EAN-13 (*)

(UPC-A EAN-13)

@@?@e@?e?@e@?@@f@@?@@@@?@@?@?@@@@?e@?@@e@?@@@??@@?e@@@?@?@@

Code 128

@?e@?@@@?@@@?@?@@@?@@@?@?e@?@?@@@?@?@@@?@?e@?@?@?@@@?e@?@@@?@@@?@?@@@?e@?@?@?e@?@?@@@?@@@?@@@?@@@?e@?@?@?@?@@@?e@?@@@?@?@?e@?@@@?@@@?@?

Code 39

@@?@e@?e?@e?@e?@@?@?e@@@?@@?@?@@?e@?e@?e@@?@e?@e@@?@@@e@??@@@e@@?@@??@@@e@?@@@?@??@@??@e?@@@?@@?@@e?@@@?@?@@

Code 128

CODE-39

CODE-128

@@?@e@??@@?e@?@@@@e?@?@e?@?@@@@?@@e?@@@?@?@@

EAN-13

3. Select Symbology

UPC-A

UPC/EAN

UPC-A, UPC-E, EAN-8, EAN-13

(UPC-A UPC-A)

@@?@e@?e?@?@@??@f@??@@@@?@??@e@?e@@e@@e@@e@@?@@??@@?@@e@?@@@@e?@?@?@@@e@@e@@e?@@@?@?@@

Enter

@@?@e@?e?@@?e?@e@?@??@@?@?e?@@??@@?@@e@?@@@@e?@?@@?@@@@?@@?@@e?@@@?@?@@

high (*)

@@?@e@?e?@@?e?@e@?@??@@?@?e?@@??@@??@@?@?@@@@e?@?@?@e?@@@@?@@e?@@@?@?@@

low

@@?@e@?e?@@?e?@e@?@??@@?@?e?@@?@@e@@e@?@@@@e?@?@@@@??@?@e@@e?@@@?@?@@

medium

Beeper volume

Postamble

Reset

@@?@e@?e?@?@@??@f@??@@@@?@??@@@@?e@?@?@@?@@??@@??@?@@@@?e@?@?@??@@@@??@@?e@@@?@?@@

data <…> (none)

@@?@e@?e?@?@@??@f@??@@@@?@??@e@?e@@e@@e@@e@@?@@??@@??@@?@?@@@@e?@?@@??@e@@@?@@e?@@@?@?@@

data <CR>

@@?@e@?e?@?@@??@f@??@@@@?@??@e@?e@@e@@e@@e@@?@e?@@??@e@?@@@@e?@?@@?e@?@@@?@@e?@@@?@?@@

data <TAB>

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

RESET

FACTORY

DEFAULTS

4. Advanced Setup

RS-232 direct cable 0-234032-00

Start EasySet

Scan set-up code

@@?@e@?e?@e@?@@f@?e?@@??@?@?@@@e@@e@@e?@e?@?@?@@@@?e@?@?e@@@@?@?@@?e@@@?@?@@

RS-232 online set-up mode

Online Set-up

EasySet

System power ON

Intermec hereby declares that the following product has been tested and found compliant with the below listed standards as

required by the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage Directive 73/23/EEC as

amended by 93/68/EEC:

EN55022 (1992) EN50082-1 (1997) EN60950 (1993)

USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help.

CANADA: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du

Canada.

AUSTRALIA-NEW ZEALAND: This equipment has been tested and found to conform to the Australian

EMC framework concerning Class B digital devices, prescribed by the Australian and New-Zealander

standard AS/NZS 3548.

The information contained in this manual is for informational purposes only and is subject to change without notice. No

part of this leaflet may be copied or reproduced in any manner without the prior written permission of Intermec

Technologies Corporation.

The word Intermec, the Intermec logo, MicroBar and EasySet are either trademarks or registered trademarks of Intermec.

Throughout this manual, trademarked names may be used. Rather than put a trademark (™ or ®) symbol in every

occurrence of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of

the trademark owner, with no intention of infringement.

NorthAmerica/Asia Pacific/Latin America • 6001 36th Avenue West • PO Box 4280 • Everett WA 98203-9280 • tel +1 425 348

2600 • fax +1 425 348 2833 • U.S. service and technical support, tel 1.800.755.5505 • Canadian service and technical support,

tel: 1.800.688.7043

Europe/ Middle East / Africa • Sovereign House • Vastern Roadtel Reading RG1 8BT • England • Ttel +44 118 987 9420

• fax +44 118 987 9416

Internet • http ://www.intermec.com

E-mail • [email protected]

N309

Regulatory Statements

Other manuals for MicroBar 9730

Table of contents

Other Intermec Media Converter manuals

Intermec

Intermec DC-DC User manual

Intermec

Intermec MicroBar 9730 User manual

Popular Media Converter manuals by other brands

TV One

TV One C2-2450A Operation manual

Black Box

Black Box LHC5128A Specifications

Net Media

Net Media SitePlayer Telnet Series user manual

Marshall Electronics

Marshall Electronics VS-104D-3GSDI user manual

M&S Systems

M&S Systems XDM4600 Xtreme Digital Music system owner's manual

DLG

DLG XS-110 user manual

Fermax

Fermax DECODER VDS quick start guide

Blonder tongue

Blonder tongue HDE-8C-QAM w/Opt 2 user manual

Exsys

Exsys EX-3605 manual

Dynex

Dynex DX-AD116 Quick setup guide

Dragino

Dragino RS485-LN user manual

GRASS VALLEY

GRASS VALLEY ADVC700 - user manual

osprey video

osprey video TALON 4K-SC quick start guide

PURE

PURE Contour 200i Air owner's manual

Inovonics

Inovonics 713 Programming and operations manual

TRENDnet

TRENDnet TFC-110MST Specifications

Puls

Puls CD5.242 installation manual

Diodes

Diodes AP3445/L user guide