6 Upgrading the Server Applications Software v1.2 Instructions
3Attach a monitor, keyboard, and mouse to the G4000A.
4Connect the Ethernet port on the back of the G4000A to your Ethernet
network. For help, see “Installing the Intermec Application Server” in
Chapter 2 of the Intermec Application Server User’s Guide (P/N 072242).
If you do not connect the G4000A to the Ethernet network, the
installation will eventually fail.
5Make sure you have the Intermec Server Applications CD.
6Turn on the G4000A. The G4000A boots, and the Intermec logo
screen appears.
7If you are prompted to log in, press Ctrl-Alt-Del, enter
administrator as the user name, and enter intermec as the
password. You must type intermec in lowercase.
8Insert the Intermec Server Applications CD in the CD drive.
9The CD should launch automatically. If not, navigate to the CD and
open the setup file on the CD.
10 When you are prompted to uninstall the previous version, click Yes.
11 After the previous version has been uninstalled and the Microsoft SQL
Server has been installed, you are prompted to reboot. Click Yes.
12 If you are prompted to log in, press Ctrl-Alt-Del, enter
administrator as the user name, and enter intermec as the
password. You must type intermec in lowercase. The installation
continues automatically.
13 The installation wizard displays a screen with the message, “Welcome to
the InstallShield Wizard for Intermec Server Applications.” Select
G4000A from the list and click Next.
Note: If the installation appears to hang, see “Troubleshooting” on
page 9 for possible solutions.
14 At the last installation wizard screen, follow these steps:
aChoose to restart the Intermec Application Server now.
bClick Finish.
cWait for the G4000A to finish rebooting.
dRemove the Intermec Server Applications CD.
15 To log in, press Ctrl-Alt-Del, enter administrator as the user name,
and enter intermec as the password. You must type intermec in
lowercase.
