InterTest iShot UV/White LED Light Source Kit User manual

UV/White LED Light
Source Kit

2iShot® UV/White LED Light Source Kit www.intertest.com
Midori™ ULB-35_NDT www.ushio.com 2
System Symbol Descriptions....................................................................... 3
Warning and Precautions............................................................................. 4
System Assembly and Operation ................................................................. 5
Air Flow Paths.............................................................................................. 6
Maintenance and Cleaning ........................................................................... 7
Troubleshooting Suggestions....................................................................... 7
Repair ......................................................................................................... 7
Manufacture Contact Information ................................................................ 8
Environment................................................................................................. 8
Electrical Ratings ......................................................................................... 8
Dimensions ................................................................................................. 9
Illumination System .................................................................................... 9
Product Ordering Information ..................................................................... 9
Approvals .................................................................................................. 10
Warranty ................................................................................................... 10
Agency Compliance Statements ................................................................ 11
FCC Class A Compliance Statement .......................................................... 11
Canadian Notice ........................................................................................ 11
Contents
Thank you for purchasing the Midori™ fiber optic illuminator which utilizes state-
of-the-art solid-state illumination technology. The light source is a high output,
efficient, compact and lightweight fiber optic light source for industrial applications
where space is a premium. The ULB-35 series fiber illuminators utilize eco-friendly
solid state LED lighting technology, exhibits instant-on and electronic intensity
dimming capability with long operating lifetime. The Midori™ ULB-35ndt LED fiber
illuminator is equipped with an Olympus fiber receptacle. The ULB-35 accepts 12V
DC input voltage for portable battery operation as well. Please read this operating
manual in its entirety before using this product.
Preface
Midori™ ULB-35_NDT www.ushio.com 2
System Symbol Descriptions....................................................................... 3
Warning and Precautions............................................................................. 4
System Assembly and Operation ................................................................. 5
Air Flow Paths.............................................................................................. 6
Maintenance and Cleaning ........................................................................... 7
Troubleshooting Suggestions....................................................................... 7
Repair ......................................................................................................... 7
Manufacture Contact Information ................................................................ 8
Environment................................................................................................. 8
Electrical Ratings ......................................................................................... 8
Dimensions ................................................................................................. 9
Illumination System .................................................................................... 9
Product Ordering Information ..................................................................... 9
Approvals .................................................................................................. 10
Warranty ................................................................................................... 10
Agency Compliance Statements ................................................................ 11
FCC Class A Compliance Statement .......................................................... 11
Canadian Notice ........................................................................................ 11
Contents
Thank you for purchasing the Midori™ fiber optic illuminator which utilizes state-
of-the-art solid-state illumination technology. The light source is a high output,
efficient, compact and lightweight fiber optic light source for industrial applications
where space is a premium. The ULB-35 series fiber illuminators utilize eco-friendly
solid state LED lighting technology, exhibits instant-on and electronic intensity
dimming capability with long operating lifetime. The Midori™ ULB-35ndt LED fiber
illuminator is equipped with an Olympus fiber receptacle. The ULB-35 accepts 12V
DC input voltage for portable battery operation as well. Please read this operating
manual in its entirety before using this product.
Preface
Thank you for purchasing the iShot®UV/White LED Light Source Kit which utilizes
state-of-the-art solid-state illumination technology. The light source is a high output,
efcient, compact and lightweight ber optic light source for industrial applications
where space is a premium. The iShot®UV/White LED Light Source Kit utilize eco-
friendly solid state LED lighting technology, exhibits instant-on and electronic intensity
dimming capability with long operating lifetime. The iShot®UV/White LED Light Source
Kit is equipped with an Olympus style receptacle. The iShot®UV/White LED Light
Source Kit accepts 12V DC input voltage for portable battery operation as well. Please
read this operating manual in its entirety before using this product.

3www.intertest.com Operating Manual
Operating Manual
www.ushio.com 3
Caution: Consult
accompanying
documentation Caution: Hot Surface
!
Caution Hazard Warning
Lamp On Lamp Off
Light; Lighting;
Illumination Intensity UV UV Light Warning
Storage Humidity Transport Temperature
Alternating Current Direct Current
Manufacturer Do Not Immerse in Any
Liquid
Do not dispose of this product as unsorted municipal waste.
Prepare this product for reuse or separate collection as specified by
Directive 2002/96/EC of the European Parliament and the Council of
the European Union on Waste Electronic and Electrical Equipment
(WEEE).If this productiscontaminated, thisdirectivedoes not apply.
+49°C
-20°C
System Symbol Descriptions

4iShot® UV/White LED Light Source Kit www.intertest.com
Midori™ ULB-35_NDT www.ushio.com 4
Warning and Precautions /
Mises en garde et précautions
WARNING /
MISE EN GARDE There are no user serviceable or replacement parts. Do not attempt to dismantle box or remove top cover. / Aucune pièce ne peut être réparée ou remplacée par
l’utilisateur. Ne pas essayer de démonter la boîte ou de retirer le couvercle du dessus.
WARNING /
MISE EN GARDE Only qualified personnel should make electrical inspections and repair of the LED Light Source. / Seul le personnel qualifié doit effectuer les vérifications
électriques et les réparations de cette source de lumière à DEL.
UV
WARNING /
MISE EN GARDE UV light is emitted from this product, Avoid eye and skin exposure to unshielded product. High intensity light at the front of the LED Light Source and at the tip of
the fiber-optic bundle will create high temperatures and UV light. To minimize the
risk of injury, avoid direct viewing or contact. / L’ultraviolet (UV) est émitté par
ce produit. Evite le contact avec les yeux ou la peau. La lampe à haute intensitée,
située sur le devant de la source de lumière à DEL et sur le bout du faisceau
de fibres optiques, va générer beaucoup de chaleur et une lumière vive. Afin
de réduire les risques de blessures, éviter de toucher l’appareil ou d’exposer
directement l’oeil à la lumière de la lampe.”
UV
WARNING /
MISE EN GARDE To prevent temporary blinding and contact with heated parts, always plug the fiber optic bundle into the LED Light Source before turning the power on. /
Pour éviter tout aveuglement temporaire ou contact avec les pièces chauffées,
toujours brancher le faisceau de fibres optiques dans la source de lumière à DEL
avant la mise en marche.
WARNING /
MISE EN GARDE Do not use the LED Light Source directly in medical applications. / Ne pas utiliser une source de lumière à DEL directe à des fins médicales.
WARNING /
MISE EN GARDE Unit MAY BE HOT. Allow to cool before handling. / L’appareil PEUT ÊTRE CHAUD. Il est important de le laisser refroidir avant d’y toucher.
!
CAUTION /
AVERTISSEMENT Preferred operation is in the horizontal position. Other operating orientations are permitted. / L’appareil fonctionne de façon optimale à l’horizontale. Les autres
orientations sont permises.
CAUTION /
AVERTISSEMENT Any changes or modifications made to this device that are not expressly approved by manufacturer may void the user’s authority to operate the
equipment. / Toute modification apportée à cet appareil et non expressément
approuvée par le fabricant peut priver l’utilisateur de son droit d’usage.
CAUTION /
AVERTISSEMENT PROVIDE ADEQUATE VENTILATION TO PREVENT OVER HEATING. Do not drape this light source. Provide a 1.5 inch (3.8 cm) distance between LED
Light Source and any solid objects. / ASSURER UNE VENTILATION ADÉQUATE
AFIN D’ÉVITER LA SURCHAUFFE DE L’APPAREIL. Ne pas couvrir la source de
lumière. Laisser au moins 3,8 cm (1,5 po) de distance entre la source de lumière
à DEL et tout objet.
CAUTION /
AVERTISSEMENT DO NOT IMMERSE or store liquids above or on the LED Light Source. / NE PAS IMMERGER la source de lumière à DEL dans des liquides ou placer des liquides
audessus de celle-ci.
CAUTION /
AVERTISSEMENT Do not operate device without the cover in place. / Ne pas faire fonctionner l’appareil sans son couvercle.
CAUTION /
AVERTISSEMENT DO NOT obstruct the airway paths for sufficient cooling is required. / NE PAS obstruer les voies d’aération afin de permettre le refroidissement adéquat de
l’appareil.
CAUTION /
AVERTISSEMENT Please read this entire manual prior to operation. / Lire le présent guide en entier avant d’utiliser l’appareil.
CAUTION /
AVERTISSEMENT Protection provided by the equipment maybe impaired if not used in accordance with the manufacture recommendations. / La protection assurée par
l’équipement risque d’être altérée si l’appareil n’est pas utilisé conformément
aux recommandations du fabricant.

5www.intertest.com Operating Manual
Operating Manual
www.ushio.com 5
System Description and Operation
1. The light source power switch should be in the OFF position. Plug the
external 12vdc power supply into the 12vdc connector. Figure 1.
2. Plug the external power supply cord into AC receptacle main power.
3. Plug the fiber-optic bundle into the light port and connect the opposite
end to the equipment being used. Figure 2.
4. Rotate the front turret so that the light port is either in front of the
UV
or the VIS LED depending on your desired output. You will feel a click
when the port is in the proper position.
5. Turn the power switch to the ON position. LED indicator light will turn
on when light source is powered. Figure 3.
6. Adjust the intensity control to set the light intensity to the desired light
output level. Figure 3.
7. Turn unit OFF when not in use. Figure 3.
8. This unit is equipped with a fiber sense interlock feature. The device
will not emit light unless fiber cable is completely inserted into the front
adapter. Please ensure fiber cable is fully seated into light port and that
the front turret is positioned in front of either the
UV
or VIS output.
12vdc
Power Plug
Light Intensity
Knob
Light Port
ON/OFF Indicator
Figure 1. Back View
Figure 2. Fiber-Optic Bundle
Figure 3. Front View
Power ON/OFF
Rotate Knob
Front Turret
Rotate turret to select
UV or visible output

6iShot® UV/White LED Light Source Kit www.intertest.com
Midori™ ULB-35_NDT www.ushio.com 6
Figure 4. Cooling and Air Flow Paths
1. Do not obstruct air flow paths. This device is designed to have proper
forced air cooling paths to maintain thermal stable operation.
2. Place in an area that provides adequate ventilation to prevent unit from
overheating. Do not drape the LED Light Source with cloth or objects
restricting airflow.
3. Airflow outlets are shown in below red arrow graphics.

7www.intertest.com Operating Manual
Operating Manual
www.ushio.com 7
Maintenance and Cleaning
Repair
1. Turn OFF light source by rotating intensity control knob counterclockwise
until the switch clicks off.
2. Completely disconnect power supply from both light source and mains
(power plug into ac outlet).
3. Wait for ~5 seconds until power supply discharges as observed on the power
supply LED indicator will turn off.
4. Reconnect power supply to both AC to main voltage and DC connector to
light source.
5. Turn ON light source by rotating knob clockwise until clicks on and LED
indicator light is on.
6. Insert fiber cable completely to deactivate fiber sense interlock feature and
ensure turret is rotated to position the fiber cable in front of either the UV or
visible LED. You will feel a click when it is in the correct position.
7. Rotate knob to increase light output intensity to desired output.
1. Turn the LED Light Source off and unplug the power cord from both the wall
outlet and the rear of the unit.
2. Wipe the external surfaces clean with a cloth dampened with mild soap and
water. DO NOT IMMERSE.
3. Wipe the power cords clean with a cloth dampened with mild soap and water.
DO NOT IMMERSE. DO NOT RECONNECT WET.
4. DO NOT plug the power source into a wall outlet until it is thoroughly dry.
5. It is recommended to periodically clean the optical surface near the LED.
Please use a soft cotton swab dipped in Isopropyl Alcohol and wipe the optic
surfaces and allow to thoroughly dry prior to use.
For repair information, please contact Customer Service at:
Telephone: [phone]
Email: customerser[email protected]
In the event the unit stops functioning, try the following steps to operate light
source. The power supply exhibits internal protection circuitry for user safety
precautions and will shutdown during certain instances. This equipment has been
tested to ESD conditions according IEC 61326-1 and performs to performance
criterion C. This means, that under certain conditions the overvoltage protection
of the power supply may turn the power supply output and the unit off to prevent
damage to the unit. In such case the power supply must be disconnected from
main power to reset this fault condition. In the event the unit suddenly turns off,
turn the unit off. Unplug the power supply from mains voltage (120V/ 230V). Wait
~5 seconds and plug the power supply back into mains voltage. Turn the unit on.
Troubleshooting Suggestions
Repair
For repair information, please contact our team at:
Phone: Ofce: 908-496-8008
Email: [email protected]

8iShot® UV/White LED Light Source Kit www.intertest.com
Midori™ ULB-35_NDT www.ushio.com 8
Manufacture Contact Information
Environment Ratings
Electrical Ratings
Supplier Name: USHIO America, Inc.
Address: 5440 Cerritos Ave.
Cypress, CA 90630
Telephone: [phone]
Email customerser[email protected]
Website: www.ushio.com
Model or Type: ULB-35ndt
Operating Temperature: 41° F to 104° F (5° C to 40° C)
Humidity: 0 to 95% rh (non-condensing)
Storage Temperature: -10° F to 140° F (-20° C to 60° C)
Humidity: 30 to 75% rh
Atmospheric Pressure: 700 hpa to 1060 hpa
Mode of Operation: Continuous
Safety System Classification: Class II
System Pollution Degree: 2
Installation Category: II
External Power Supply Ratings:
Input: 100 - 240 V~, 50/60 Hz, 1.4 A max
Output: +12 V , 5.0 A
Recommended PS: UAI Part: UPS-00
ULB-35 Power Ratings:
Voltage: +12V DC; 14V DC maximum
Current: 5.0 amp
Battery: USHIO America, Inc. recommends using a
UR (or other recognized testing laboratory)
recognized battery rated at 12V/8Ahr or
equivalent with a minimum 5.0 amp current
limit rating.
Midori™ ULB-35_RVI www.ushio.com 8
Manufacture Contact Information
Environment Ratings
Electrical Ratings
Supplier Name: USHIO America, Inc.
Address: 5440 Cerritos Ave.
Cypress, CA 90630
Telephone: [phone]
Email customerser[email protected]
Website: www.ushio.com
Model or Type: ULB-35rvi
Operating Temperature: 41° F to 104° F (5° C to 40° C)
Humidity: 0 to 95% rh (non-condensing)
Storage Temperature: -10° F to 140° F (-20° C to 60° C)
Humidity: 30 to 75% rh
Atmospheric Pressure: 700 hpa to 1060 hpa
Mode of Operation: Continuous
Safety System Classification: Class II
System Pollution Degree: 2
Installation Category: II
External Power Supply Ratings:
Input: 100 - 240 V~, 50/60 Hz, 1.4 A max
Output: +12 V , 5.0 A
Recommended PS: UAI Part: UPS-00
ULB-35 Power Ratings:
Voltage: +12V DC; 14V DC maximum
Current: 5.0 amp
Battery: USHIO America, Inc. recommends using a
UR (or other recognized testing laboratory)
recognized battery rated at 12V/8Ahr or
equivalent with a minimum 5.0 amp current
limit rating.
Midori™ ULB-35_RVI www.ushio.com 8
Manufacture Contact Information
Environment Ratings
Electrical Ratings
Supplier Name: USHIO America, Inc.
Address: 5440 Cerritos Ave.
Cypress, CA 90630
Telephone: [phone]
Email customerser[email protected]
Website: www.ushio.com
Model or Type: ULB-35rvi
Operating Temperature: 41° F to 104° F (5° C to 40° C)
Humidity: 0 to 95% rh (non-condensing)
Storage Temperature: -10° F to 140° F (-20° C to 60° C)
Humidity: 30 to 75% rh
Atmospheric Pressure: 700 hpa to 1060 hpa
Mode of Operation: Continuous
Safety System Classification: Class II
System Pollution Degree: 2
Installation Category: II
External Power Supply Ratings:
Input: 100 - 240 V~, 50/60 Hz, 1.4 A max
Output: +12 V , 5.0 A
Recommended PS: UAI Part: UPS-00
ULB-35 Power Ratings:
Voltage: +12V DC; 14V DC maximum
Current: 5.0 amp
Battery: USHIO America, Inc. recommends using a
UR (or other recognized testing laboratory)
recognized battery rated at 12V/8Ahr or
equivalent with a minimum 5.0 amp current
limit rating.
Midori™ ULB-35_RVI www.ushio.com 8
Manufacture Contact Information
Environment Ratings
Electrical Ratings
Supplier Name: USHIO America, Inc.
Address: 5440 Cerritos Ave.
Cypress, CA 90630
Telephone: [phone]
Email customerser[email protected]
Website: www.ushio.com
Model or Type: ULB-35rvi
Operating Temperature: 41° F to 104° F (5° C to 40° C)
Humidity: 0 to 95% rh (non-condensing)
Storage Temperature: -10° F to 140° F (-20° C to 60° C)
Humidity: 30 to 75% rh
Atmospheric Pressure: 700 hpa to 1060 hpa
Mode of Operation: Continuous
Safety System Classification: Class II
System Pollution Degree: 2
Installation Category: II
External Power Supply Ratings:
Input: 100 - 240 V~, 50/60 Hz, 1.4 A max
Output: +12 V , 5.0 A
Recommended PS: UAI Part: UPS-00
ULB-35 Power Ratings:
Voltage: +12V DC; 14V DC maximum
Current: 5.0 amp
Battery: USHIO America, Inc. recommends using a
UR (or other recognized testing laboratory)
recognized battery rated at 12V/8Ahr or
equivalent with a minimum 5.0 amp current
limit rating.
Midori™ ULB-35_RVI www.ushio.com 8
Manufacture Contact Information
Environment Ratings
Electrical Ratings
Supplier Name: USHIO America, Inc.
Address: 5440 Cerritos Ave.
Cypress, CA 90630
Telephone: [phone]
Email customerser[email protected]
Website: www.ushio.com
Model or Type: ULB-35rvi
Operating Temperature: 41° F to 104° F (5° C to 40° C)
Humidity: 0 to 95% rh (non-condensing)
Storage Temperature: -10° F to 140° F (-20° C to 60° C)
Humidity: 30 to 75% rh
Atmospheric Pressure: 700 hpa to 1060 hpa
Mode of Operation: Continuous
Safety System Classification: Class II
System Pollution Degree: 2
Installation Category: II
External Power Supply Ratings:
Input: 100 - 240 V~, 50/60 Hz, 1.4 A max
Output: +12 V , 5.0 A
Recommended PS: UAI Part: UPS-00
ULB-35 Power Ratings:
Voltage: +12V DC; 14V DC maximum
Current: 5.0 amp
Battery: USHIO America, Inc. recommends using a
UR (or other recognized testing laboratory)
recognized battery rated at 12V/8Ahr or
equivalent with a minimum 5.0 amp current
limit rating.

9www.intertest.com Operating Manual
Operating Manual
www.ushio.com 9
Dimensions
Illumination Source
Length: 192MM (7.6”)
Width: 118MM (4.6”)
Height: 133MM (5.2”)
Weight: 0.90 kg (2.0 lbs)
Product ID Description Order Code
ULB-35ndt NDT DUAL CHANNEL LED Light Source 1004270
UPS-00 Universal Input Power Supply 1003879
UPC-US US power cord; EN60320-C7 1003881
UPC-EU EU Power cord EN60320-C7 1003880
UPC-UK UK Power cord EN60320-C7 1003882
UPC-AU AU Power Cord; EN60320-C7 1004095
UPS-03 12vdc LiP Battery Pack 5002493
Product Ordering Information
118mm
4.64” 171mm
6.75”
192mm
7.58”
133mm
5.22”
Type: LED Custom Module
Wavelength: 365-370nm Peak
Visible LED Color Temperature: 5700K - 6500K Nominal
Power: Peak 50 Watts
Average LED Life*: 10,000+Hours
* Based on LED manufacturer rated wattage and thermal operation.
Operating Manual
www.ushio.com 9
Dimensions
Illumination Source
Length: 127MM (5.0”)
Width: 90MM (3.5”)
Height: 68MM (2.7”)
Weight: 0.45 kg (1.0 lbs)
Product ID Description Order Code
ULB-35rvi 35W RVI UV LED Light Source, ACMI 1004232
ULB-35rvi 35W RVI UV LED Light Source, Machida 1004233
UPS-00 Universal Input Power Supply 1003879
UPC-US US power cord; EN60320-C7 1003881
UPC-EU EU Power cord EN60320-C7 1003880
UPC-UK UK Power cord EN60320-C7 1003882
UPC-AU AU Power Cord; EN60320-C7 1004095
50159 Storz Fiber Adapter; screw-in 50159
50160 Olympus Fiber Adapter; screw-in 50160
UAC-01 Portable Light Case 5002496
UPS-03 12vdc LiP Battery Pack 5002493
Product Ordering Information
[127 mm ]
5.0”
[114 mm]
4.5”
[90 mm ]
3.5”
[68 mm ]
2.7”
Type: LED Custom Module
Wavelength: 365-370nm Peak
Power: 50 Watts
Average LED Life*: 10,000+Hours
* Based on LED manufacturer rated wattage and thermal operation.
Product Number Description
EM14466 NDT DUAL CHANNEL LED Light Source
EM66693 Universal Input Power Supply (60W 12V P/S)
EM11890 US power cord (NEMA 5-15P to IEC C13)

10 iShot® UV/White LED Light Source Kit www.intertest.com
Midori™ ULB-35_NDT www.ushio.com 10
Approvals
The CE mark on this product indicates that it has been tested
to and conforms to the provisions noted within the following
directives:
Low Voltage: 2014/35/EU
EMC: 2014/30/EU
RoHS 2: 2011/65/EU
In accordance with the following standards:
EN 61010-1
IEC 61326-1
EN 61326-1
IEC/EN 61000 3-2
IEC/EN 61000 3-3
EN 50581
IEC/EN 62471:2006 LED Photobiological safety lamp
standard, categorized as Risk Group 3 (High-Risk).
Conforms to UL Std 61010-1
Certified to CSA Std C22.2 No. 61010-1
WEEE
(www.lamprecycle.org)
4009043
Limited Warranty
USHIO America warrants the LED Light Source, when new, to be free of defects in
material and workmanship and to perform in accordance with the manufacturer’s
specifications when subject to normal use and service for a period of one year
from the date of purchase from USHIO America or an authorized agent. USHIO
America will either repair or replace any components found to be defective or at
variance from the manufacturer’s specifications within this time at no cost to the
customer. It shall be the purchaser’s responsibility to return the instrument to the
authorized distributor, agent, or service representative.
This limited warranty does not cover the breakage or failure due to tampering,
misuse, neglect, accidents, improper installation, modification, shipping, or to
improper maintenance, service, and cleaning procedures. This limited warranty
is also void if the instrument is not used in accordance with the manufacturer’s
recommendations or if required service is performed by anyone other than USHIO
America or an authorized agent. The purchase date determines limited warranty
requirements. No other express or implied limited warranty is given.

11www.intertest.com Operating Manual
Operating Manual
www.ushio.com 11
Agency Compliance Statements
FCC Class A Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at
his own expense.
Canadian Notice
This equipment does not exceed the Class A limits for radio noise emissions as
described in the Radio Interference Regulations of the Canadian Department of
Communications.
Le present appareil numerique n’emet pas de bruits radioelectriques depassant
les limites applicables aux appareils numeriques de la classe A prescrites
dans le Reglement sur le brouillage radioelectrique edicte par le ministere des
Communications du Canada.
CAUTION Any changes or modifications made to this device that are
not expressly approved may void the user’s authority to
operate the equipment.
NOTE To maintain compliance with FCC Rules and Regulations,
cables connected to this device must be shielded cables,
in which the cable shield wire(s) have been grounded
(tied) to the connector shell.
!

Rev1-091517MADE IN USA
www.intertest.com
303 State Route 94
Columbia, NJ 07832 USA
Ofce: 908-496-8008
Toll Free (U.S.): 800-535-3626
Fax: [phone]
Sold By: