Intova X2 User manual

Precautions
» Before using the camera, read the precautions to ensure correct use,
the best performance and longer lifespan.
» Do not leave or store the camera in direct sunlight, especially the
lens, as prolonged exposure to direct sunlight can damage the
image sensor.
» Store in a cool, dry environment.
» During storage, note that battery must be recharged periodically
to maintain operating ability. Allowing total discharge may ruin the
battery.
» Clean with a soft dry cloth and take special care around lens.
» Format Memory Card prior to rst use.
» Do not use a memory card that contains les from a dierent device
as this may cause camera to malfunction.
LIMITED WARRANTY: This product has a limited 1 year warranty, to the
original purchaser, to be free from defects in materials and workmanship.
Follow all product instructions and warnings as warranty does not cover
damage due to misuse, improper care, accidents, or alterations. See
www.intova.com for further details, limitations, and restrictions.
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
» Reorient or relocate the receiving antenna.
» Increase the separation between the equipment and receiver.
» Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
» Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
C
D
E
G
H
I
K
J
F
B
BUTTONS AND INTERFACE
X2
QUICK START GUIDE
Need help using your camera?
WE’RE HERE FOR YOU.
Visit our website:
www.intova.com
Call customer support:
[phone]
Email customer support:
[e-mail]
1. Install Intova App onto an iOS
or Android wireless device such as
a smart phone or tablet.
2. Turn on Wi by pressing
and holding MENU button until
“Processing” in red appears. WiFi
icon should turn green.
3. Connect to X2 Camera
Wi signal: INTOVA X2.
Password: 1234567890
4. Open app & control camera.
WIFI CONTROL
A. Video Light/Flash
B. Shutter Button
» Video mode: start/stop
recording.
» Photo mode: shutter button.
» Thumbnail view mode: select.
» Playback mode: Return to
thumbnail view.
» Exit menu.
C. Power Button
» Power the camera on/o
(press & hold).
» Power ash on/o (halfpress).
» Video/Photo/View mode:
Select.
» Playback mode: exit menu and
return to video screen.
D. Indicator Light
» Red LED is ON while charging
and OFF when charge is
complete. FLASHES when
video recording is in progress.
E. Door Lock
F. Removable Housing Door
G. Tripod Mount
H. Float Strap Attachment
K/I. Up/Down Buttons
» Scroll up/down to select
thumbnail to view.
» Video/photo mode: Adjust
digital zoom.
» Playback mode: speed up
video playback (down button)
and slow down video playback
(up button).
J. Menu/OK Button
» Access Menu.
» Select.
» Playback mode: start/stop
video/go to thumbnail view.
» Press and hold to turn on WiFi.
A

1.OPEN HOUSING DOOR
4. INSERT MICRO SD CARD
(Up to 64GB class 10 microSD card)
2.INSERT BATTERY 3. CHARGE
X2
QUICK START GUIDE
INSERT # 1194 - 4/16
INDUSTRIAL REVOLUTION, INC.
SEATTLE, WA • [phone]
5. POWER ON (PRESS & HOLD)
PRESS POWER (HALFPRESS) FOR LIGHT6. PRESS SHUTTER TO SHOOT/RECORD
For complete instructions go to www.intova.com.