INVENTOR INVMS45A2B-BS User manual

INVMS45A2B-BS

1
General
This appliance is intended
– Working environment staff areas or break rooms
– Farmhouses
– Hotel and motel environments
– Bed and breakfast environments
– Catering and similar non-retail environments
for use in households
or other similar applications such as:
This refrigerator is ideal for offices, hotels, student
dormitories, and households. It is best suited for
refrigerating beverages and preserving foods. Take
advantage of it's lightweight, compact design. Enjoy
it's easy operation and low energy consumption.

2
Installation Instructions
Safety Warnings
1. Avoid tilting the refrigerator more that 45 degrees from it's
upright position when moving.
2. Be sure to allow enough operational space around the
unit for optimal performance.
3. Avoid placing the refrigerator in areas with high humidity
levels to prevent rust or corrosion.
1. Make sure you are using an outlet that is approved for
the voltage requirements of this unit before plugging it in.
2. Use an independent outlet, adapters may cause over
heating.
3.
Do not store any inflammable materials (benzine, ether,
gas, etc.) in the refrigerator.
4. Do not splash water on the refrigerator as it may cause
electric shock or unit malfunction.
5. If gas should leak from the cooling circuit, please do not
plug or unplug the appliance as it may cause sparks or
fire.

3
7. Children should be supervised to ensure
that they do not play with the appliance.
8. If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
9. Keep all the refrigerator's ventilation
openings clear of obstructions.
6. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities
unless they are supervised or have been
advised of it's use and operational hazards.

4
10. Do not use any mechanical devices or
instruments to accelerate the defrosting
process without consulting with the
manufacturer first.
11. Do not damage the cooling circuit.
12. Do not use any electrical devices
inside the refrigerator unless they are
approved by the manufacturer.
13. Do not store any flammable or explosive
substances in this refrigerator.

5
Disposal
1. Old appliances still have some residual
value. An environmentally friendly method of
disposal will ensure that valuable raw
materials can be recovered and used again.
2. The refrigerant and insulation materials
used in refrigerators require special disposal
procedures. Consult your local council office
for proper disposal instructions for your old
appliance and the packaging from the
new appliance.

6
Operation Instructions
This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
Correct Disposal of this product
1. When operating the refrigerator for the first time pay close
attention to the following. Set the refrigerator's thermostat
(located inside the refrigerator) to your desired temperature.
Keep the refrigerator empty and closed until this
temperature has been reached (approximately 2-3 hours).
The refrigerator is ready for use when you hear that is has
resumed quiet operation.
2. A medium temperature setting is recommended for general
everyday use.
3. It is recommended to defrost the freezer whenever the
evaporator accumulates 3-4mm of frost. To defrost the
freezer remove all frozen items and set the thermostat to the
"OFF" position. When the frost has melted, remove the
water and make sure the interior is dry. Reset the thermostat
to your desired temperature and replace the frozen items.

7
Operational Precautions
1. Avoid overfilling items into the refrigerator and leaving the
door open for extended periods of time. This can lead to
excessive power consumption and unit malfunction.
2. Avoid placing heavy, sharp, or corrosive items on the shelves.
3. If the unit has been unplugged wait ten minutes before
reinserting the plug.
4. Avoid placing bottled liquids in the freezer as they may break
and cause damage.
5. Keep the refrigerator's doors closed during power outages.
6. Never use sharp or metallic objects to remove frost from the
evaporator when defrosting.
7. Avoid removing frozen items with wet hands as it may cause
frost bite.
Maintenance
1. Make sure to unplug the refrigerator during cleaning. If you
wish to clean the plug make sure it is completely dry before
re-inserting it.
2. Avoid using hot water or abrasive, chemical, acid, alcohol
based products when cleaning the refrigerator. These items
may damage the parts or surfaces of the refrigerator.

8
3. Clean the door baskets frequently to avoid dirt or fog from
accumulating.
4. If you plan to store or not use the refrigerator for an exten-
ded length of time make sure it is unplugged, cleaned and
dried, and all doors are shut.
1. The sound of flowing water. This may occur during normal
operation.
2. Condensation appears on the outer surface. This can occur
in high humidity conditions, simply remove condensation
with a dry cloth.
3. The refrigeration and freezer areas take a long time to
become cold during start up. This may be caused by a high
external temperature.
4. The surface of the compressor becomes hot. This can
happen under normal operation, be careful not to touch it.
Do not be alarmed by the following: