INVENTOR INVMS67A User manual

MODELS:
INVMS67A
INVMS67A-BS
INVMS67AB-BS
• USER’S MANUAL
• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ
• MANUALUL UTILIZATORULUI
• BEDIENUNGSANLEITUNG
• MANUEL D’UTILISATEUR
REFRIGERATOR
BAR
FRENCH

Contents
1. SAFETY WARNINGS............................................................................................................ 1
2. INSTALLTION...................................................................................................................... 1
2.1 Loca on...................................................................................................................... 2
2.2 Reversing the Door Swing .......................................................................................... 2
2.3 Door Space Requirements.......................................................................................... 3
2.4 Leveling the Unit ....................................................................................................... 3
2.5 Cleaning Before Use ................................................................................................... 4
2.6 Before Using Your Unit............................................................................................... 4
2.7 Interior Accessories.................................................................................................... 4
3. PRODUCT OVERVIEW ........................................................................................................ 4
4. OPERATION........................................................................................................................ 5
4.1 Adju g the Temperature........................................................................................ 5
4.2 Noises Inside the Unit!............................................................................................... 5
4.3 Food Storage Tips...................................................... ................................................ 5
5. CLEANING .......................................................................................................................... 6
5.1 Defro ................................................................................................................... 6
5.2 Cleaning the Interior and the Exterior of the Unit..................................................... 6
5.3 Cleaning Tips .............................................................................................................. 6
6. MAINTENANCE .................................................................................................................. 6
6.1 Care When Handling / Moving Your Unit................................................................... 6
6.2 Servicing ..................................................................................................................... 6
6.3 Turning the Unit Off for Extended Periods of Time................................................... 7
7. ......................................................................................................... 7
7.1 Notes:......................................................................................................................... 7
8. ENERGY SAVING TIPS ........................................................................................................ 7
9. DISPOSAL ........................................................................................................................... 8
9.1 Correct Disposal of this product................................................................................. 8

1
1. SAFETY WARNINGS
1) WARNING -
WARNING -
2)
3) WARNING- Do notdamage the cooling circuit.
WARNING- Do notuse any electrical devices inside the refrigerator unless they are approved
by the manufacturer.
5) This appliance should beunplugged before any maintenance is performed or when itis notin use.
6) It is not advised for children under 8 to use this appliance. Please make sure children 8 and above
hazards involved. The above persons without proper supervision should not perform Cleaning and
maintenance.
7) If the supply cord is damaged, it mustbe replaced by the manufacturer, its service agentor
similarly qualified persons in order to avoid ahazard.
and flammable gases.
9) Please remove all doors before disposal to prevent children from becoming trapped inside.
- Workplace staff areas orbreak rooms
- Farmhouses
- Bed and breakfast environments
11) Do notstore explosive substances such as aerosol cans, which contain flammable propellants in this
appliance.
4)
IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORIZED SERVICE PERSONNEL TO
CARRY OUT ANY SERVICING OR REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS.
TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF.
for use

2
2.1 Location
ambient temperatures may cause the unit to operate improperly. This unit is not designed for use in
When installing the unit be sure to allow enough open area around all sides (20 cm from the top, 15cm
from the back and 40 cm from the sides). This will allow air to circulate around the wine cooler and
fully.
2.2 Reversing the Door Swing
Tools Required: Phillips head screwdriver / Slot head screwdriver / Hexagonal spanner
◆If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
◆Ensure the unit is unplugged and empty.
◆Adjust the two leveling feet to their highest posi on.
◆Tilt the unit slightly backwards to take the door off. You should rest the unit on
something solid so that it will not slip during the door reversing process.
◆All parts removed must be saved for the reinstalla on of the door.
◆Do not lay the unit flat as this may damage the coolant system.
◆We recommend that 2 people handle the unit during assembly.
1) Remove the plas c covering from the top door hinge.
2) Unscrew the three screws from the bo om bracket.
Remove the foot from the opposite side.
3) Place parts aside.
2. INSTALLATION

3
4) Slide the appliance door down about 15cm and offthe
top hinge pin and li away from the appliance.
5) Remove the two screws from top bracket and replace
on the other side. You will need to first remove the plas c caps
from the other side.
6) Slide the appliance door back on to the Top hinge,
making sure
Screw the bo om hinge into place on the new side.
Replace the other foot on the other side. Replace the
door hinge.
7) Check that the door is aligned horizontally and
ver cally and that the seals are closed on all sides
before finally ghtening the bo om hinge.
Re-adjust the leveling feet.
2.3 Door Space Requirements
The unit's door must be able to open fully as shown.
2.4 Leveling the Unit
To do this, adjust the two leveling feet at the front of the unit.
If the unit is not level, the door and magne c seal alignments
will not be covered properly.
8 8 0
80 0

4
2.5 Cleaning Before Use
water usinga damp sponge or cloth. The shelves and salad bin can be washed with warm soapy
water, besure they are completely dry before replacing. Clean the exteriorof the unit with
2.6 Before Using Your Unit
to reach the correct temperature and ensure that it is running properly. Do not overfill the unit
with items.
◆Before Plugging in
You must check that you have a socket, which is compa ble with the plug supplied
with the unit.
◆Before Turning On!
2.7 Interior Accessories
Shelves can beinserted or removed bysliding them in oroutof the different level slide guides.
the full size glass shelf directly above the bin.
User's can remove shelves or drawers, depending on their daily use needs, to maximize the
volume of the food and freezer compartments.
hours
Somemes slightly

The thermostat is located in the interior of the refrigerator on the
OFF: Cooling stops
MIN: Minimal cooling
MAX: Maximal cooling
It may be necessary to set the thermostat to maximal cooling (MAX) when there are high
ambient temperatures. During maximal cooling the compressor may run continuously.
It is advised to wait 24 hours before placing items inside.
5
Small door
Pan drain
，
Steel wire shelf
Leveling feet
Thermostat
Wire steel bar
*All images in this instruc on manual are for explanatory purposes only, please refer to your individual unit for details.
4. OPERATION
4.1 Adjus ng the Temperature
◆
◆
◆
4.2 Noises Inside the Unit!
You may no ce that your unit makes some unusual noises. Most of these are perfectly normal,
but you should be aware of them!
The circulaon of the refrigerant liquid causes these noises in the cooling system.
become more pronounced since the introducon of CFC free gases. This is not a fault and will not
affect the performance of your unit. This is the compressor motor working, as it pumps the
refrigerant around the system.
4.3 Food Storage Tips
◆
◆
Cooked meats/fishes should always be stored on a shelf above raw meats/fishes to avoid
container on the lowest shelf.
3. PRODUCT OVERVIEW
cooling (adequate for

6
unit are kept cool.
To keep foods flavorful and fresh store them in separate sealed containers. Fruits and vegetables
do not need to be sealed. Fruit and vegetables do not need to be wrapped.
Always let cooked food cool down before placing them in the unit. This will help to maintain
the internal temperature of the unit.
Avoid frequently opening the door to prevent the cool air from escaping. We recommend that
you only open the door when you need to put food in or take food out.
◆
◆
◆
5. CLEANING
5.1 Defros ng
Frost may accumulate on the inner rear surface of the appliance
which will automacally defrost duringthe of cycle of the compressor.
Water is channeled via the drain hole to the collec on tray above the
compressor where it will evaporate.
Please ensure the drain hole is checked and cleaned on a regular basis
so water can exit the storage compartment.
5.2 Cleaningthe Interior and the Exterior of the Unit
◆
◆
◆
◆
Remove all the shelves and thesalad bin. To remove the salad bin, first remove thelower
door shelf.
warm water usinga damp sponge or cloth. Make sure the shelves and salad bin are completely
dry before replacingthem.
Use adamp cloth to clean the exterior, and then wipe with astandard furniture polish. Make
theunit.
of theunit).
6. MAINTENANCE
6.1 Care When Handling/ MovingYour Unit
Hold the unit around its sides or base when moving it. Under no circumstances should it be li ed
by holdingthe edges of the top surface.
6.2 Servicing
An authorized engineer should service the unit and onlygenuine spare parts should be
5.3 CleaningTips
please contact a qualified technician for assistance.

7
technician.
6.3 Turning the Unit Off for Extended Periods of Time
Disconnect the unit from the power outlet. Remove all the items and clean the unit. Be sure to
leave the door ajar to prevent unpleasant odors.
7.
Inopera on
Isthere electricalcurrent being suppliedtothe outlet?
Isthe outlet equippedto handle the requiredvoltage?
Hasthe fuse burnt out on the circuit breaker?
Odor
Long-termopera on of
compressor
It isnormal
ambient temperatures.
Avoid overfilling the refrigerator.
Wait for hot foodstocool before placing themin the
refrigerator.
Avoid frequently opening the refrigerator dorr.
Illumina ng light does not
shine
Make sure the refrigerator is plugged in.
Check tosee ifthe light is damaged.
The refrigerator door can not
be properly closed.
Make sure food items are not blocking the door.
Make sure the refrigerator is not overfilled.
Loudnoises Make sure the refrigerator is level and balanced.
7.1 Notes:
The refrigerator may emit heat during o
8. Energy Saving Tips
and humid weather.
Remember to occasionally check that there
◆
◆
◆
Are foods stored in sealedcontainers?
Doesthe interior needto be cleaned?

8
Allow freshly cooked hot foods to come to an ambient temperature before placing them in the
refrigerator.
Be sure the wall behind the refrigerator remains dirt and dust free, especially for units equipped
with an outer condenser.
◆The appliance should be placed in the coolest area of the room. Avoid placing in direct sunlight
◆ Avoid overfilling the refrigerator as it forces the compressor to run more than needed.
◆Be sure to store foods in dry, sealed containers.
This cuts down on frost build-up inside the appliance.
◆The salad bin should not be lined with aluminum foil, wax paper, or paper towels.
◆
Try to remove all the items you need with one door opening.
9. DISPOSAL
materials used in refrigerators require special disposal procedures. Consult your local council office
When disposing of an old unit, break off any old locks or latches and remove the door as a safeguard.
9.1 Correct Disposal of this product
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use
the return and collec on systems or contact the retailer where the
product was purchased. They can take this product for environmental
safe recycling.
For more informa on, please contact your local authority or the retailer where you purchased
the product.
consumpon
energy
frequently