Iomega StorCenter ix2 User manual

Stor
Center ix2
Network Storage

Your
Iomega
®
StorCenter ix2 Network Storage provides flexible, high performan e data
storage that an be used on a single omputer or a network.
Your
StorCenter Network Drive supports two onne tion options:
 Network
NetworkNetwork
Network— onne t the drive to a network to allow multiple users to a ess the
StorCenter as a lo al disk drive.
 Ethernet on a single omputer
Ethernet on a single omputerEthernet on a single omputer
Ethernet on a single omputer— onne t the drive dire tly to a single omputer via
the Ethernet port.

Page
1
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...



Safety Information
Safety InformationSafety Information
Safety Information
Observe the following guidelines when performing any work on your StorCenter devi e:
1. Follow all instru tions marked on the StorCenter devi e and in the do umentation.
2.
Use only the power supply able provided with the StorCenter devi e. Always use the
appropriate power supply able for your ountry.
3. Unplug the StorCenter devi e before leaning. Do not use liquid or aerosol leaners.
Use a damp loth for leaning.
4. Do not use the StorCenter devi e near water. Do not spill liquid on or into the
StorCenter devi e.
5. Do not pla e the StorCenter devi e on an unstable surfa e.
6. Openings in the StorCenter devi e abinet are provided for ventilation and should
not be blo ked or overed.
7. Make sure the StorCenter devi e has ample ventilation (at least 6" or 127 mm) in
front and behind the StorCenter devi e. Do not pla e the StorCenter devi e near or
on a radiator or heat register.
8. Do not walk on the power ord or allow anything to rest on it.
9. There is a danger of explosion if the battery is in orre tly repla ed. Repla e only
with the same or equivalent type re ommended by the equipment manufa turer.
Dispose of used batteries a ording to lo al, state, regional, and federal regulations.
Under any of the following onditions, unplug the StorCenter devi e from the wall outlet
and onta t te hni al support:
 The power ord or plug is damaged.
 Liquid has been spilled into the StorCenter devi e.
 The StorCenter devi e does not fun tion properly when the operating instru tions
are followed.
 The StorCenter devi e was dropped or the abinet is damaged.
| top of page |
Page
2
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...


Page
3
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...



About the Iomega
About the IomegaAbout the Iomega
About the Iomega
®
®®
®
StorCenter ix2 Network
StorCenter ix2 Network StorCenter ix2 Network
StorCenter ix2 Network
Storage
StorageStorage
Storage
 Key Features
 Status Indi ators
 Default Settings
 Open Sour e Software
Key Features
Key FeaturesKey Features
Key Features
 Network sharing
 Ethernet onne tivity (10/100/1000Base-TX)
 Built-in USB printer sharing
 No server or host required
 A tive Dire tory Servi es (ADS) Support
 Array support: JBOD, RAID 1
 Supports mixed networks (Windows, Ma OS, and Linux/UNIX systems)
 Supports SMB/CIFS (Windows), AFP (Ma intosh), NFS (UNIX/Linux), and FTP
proto ols.
 Supports 2 USB printers.
 Supports 2 USB storage devi es.
 Single able install, no drivers required
 Large apa ity
| top of page |
Page
4
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...

Key Benefits
Key BenefitsKey Benefits
Key Benefits
 Plug and Share
Plug and SharePlug and Share
Plug and Share—easily store and share files from any omputer on the network
 Low Cost
Low CostLow Cost
Low Cost—network storage without the expense of a server
 Automati onfiguration
Automati onfigurationAutomati onfiguration
Automati onfiguration—with Iomega StorCenter Manager software
| top of page |
Status Indi ators
Status Indi atorsStatus Indi ators
Status Indi ators
The indi ator lights on the StorCenter devi e allow the drive to visually demonstrate its
status.
| top of page |
Default Settings
Default SettingsDefault Settings
Default Settings
IP address:
IP address:IP address:
IP address: If no DHCP server is found on your network the StorCenter will get
a self-assigned IP address in the 169.254.x.x range.
Devi e Name:
Devi e Name:Devi e Name:
Devi e Name: The default name for your StorCenter is Storage
StorageStorage
Storage.
SMB Share Name:
SMB Share Name:SMB Share Name:
SMB Share Name: publi
| top of page |
Color
ColorColor
Color A tivity
A tivityA tivity
A tivity Meaning
MeaningMeaning
Meaning
Red
RedRed
Red Solid Drive not ready/Drive Failure
Red
RedRed
Red Flashing Drive not ready, busy (formatting drive, resetting to
default settings, repairing drive, or powering down)
Blue
BlueBlue
Blue Solid Drive powered up and ready
Blue
BlueBlue
Blue Steady Pulse Devi e starting up
Blue
BlueBlue
Blue Flashing Drive in use, transferring data (reading / writing)
Red
RedRed
Red / Blue
BlueBlue
Blue Alternating The drive ID feature has been a tivated on the drive
Page
5
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...


Open Sour e Software
Open Sour e SoftwareOpen Sour e Software
Open Sour e Software
The software in luded in this produ t ontains opyrighted software that is li ensed under
open sour e agreements. Components of this software overed under GPL or other open
sour e li enses are fully do umented as to li ense and redistribution requirements in the
ReadMe file provided with the software. A opy of this ReadMe may, at Iomega’s dis retion
and subje t to hange at any time, will be available on Iomega’s Support and Download
site at www.iomega. om. You may download the orresponding sour e ode (when sour e
ode distribution is required) from the Iomega web site at www.iomega. om/support. To
lo ate the download page for open sour e ode, sele t your Iomega produ t and your
operating system. S roll down the page to the sear h field and enter “open sour e.” In
addition, you an also obtain a opy of the appli able open sour e ode on CD by sending
a money order or he k for $10 to:
Iomega Corporation, ATTN: Sour e Code
4059 South 1900 West
Roy, UT 84067 USA
Please in lude the model name for your Iomega produ t with the request.
| top of page |
Page
6
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...




Conne ting the StorCenter devi e
Conne ting the StorCenter devi eConne ting the StorCenter devi e
Conne ting the StorCenter devi e
 Che k Pa kage Contents
 Initial Setup
 Initial Configuration
 Uninstalling the Storage Manager
Che k Pa kage Contents
Che k Pa kage ContentsChe k Pa kage Contents
Che k Pa kage Contents
Verify that the box ontains the following items:
NOTE:
NOTE:NOTE:
NOTE: Pa kage ontents may vary. The illustrations may not mat h your pa kage ontents.
| top of page |
Iomega
®
StorCenter ix2 Network Storage
(Models may vary) Inline Power Supply
Ethernet Cable
Page
7
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...



Conne ting the StorCenter devi e
Conne ting the StorCenter devi eConne ting the StorCenter devi e
Conne ting the StorCenter devi e
 Che k Pa kage Contents
 Initial Setup
 Initial Configuration
 Uninstalling the Storage Manager
Initial Setup
Initial SetupInitial Setup
Initial Setup
NOTE:
NOTE:NOTE:
NOTE: If you have pur hased more than one StorCenter, omplete all steps on one before
setting up additional devi es.
1.
Use the in luded network able to onne t the StorCenter devi e to a network hub or
swit h.
— or —
Use the in luded network able to onne t the StorCenter devi e dire tly to a
omputer.
2. Conne t the in luded power ord to the ba k of the StorCenter devi e and an
Uninterruptible Power Supply (UPS).
NOTE:
NOTE:NOTE:
NOTE: Never plug your StorCenter devi e dire tly into a wall so ket or power strip.
Unexpe ted loss of power may orrupt data or damage the StorCenter devi e
operating system.
Page
8
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...


3. Power on the StorCenter devi e using the power button on the ba k panel.
4. Start your omputer, wait for the operating system to load, then insert the CD.
NOTE:
NOTE:NOTE:
NOTE: If the software doesn't run automati ally, double li k on the CD i on, then
double li k the Setup
SetupSetup
Setup i on.
Linux Users:
Linux Users:Linux Users:
Linux Users:
The installer writes information to the /usr/bin dire tory whi h requires
root-level a ess. To su essfully install the StorCenter Manager software, you will
need to either log in as root or use sudo
sudosudo
sudo to laun h the installer from the ommand
line.
5.
Install the StorCenter Storage Manager software. On e the installation ompletes, the
StorCenter Storage Manager software will laun h automati ally.
NOTE:
NOTE:NOTE:
NOTE: StorCenter Manager will automati ally s an your network when laun hed. If
you re eive a message from Windows Firewall alerting you of network a tivity, li k
the unblo k
unblo kunblo k
unblo k button.
NOTE:
NOTE:NOTE:
NOTE: For best results use a omputer that is onne ted to the same router, hub, or
swit h as the StorCenter devi e.
6. On e the StorCenter Manager software has found the StorCenter devi e, log into the
StorCenter devi e. If you are logging in for the first time, follow the Devi e Setup
Wizard that will help you reate an administrator a ount and onfigure the
StorCenter devi e.
| top of page |
Page
9
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...



Conne ting the StorCenter devi e
Conne ting the StorCenter devi eConne ting the StorCenter devi e
Conne ting the StorCenter devi e
 Che k Pa kage Contents
 Initial Setup
 Initial Configuration
 Uninstalling the Storage Manager
Initial Configuration
Initial ConfigurationInitial Configuration
Initial Configuration
This se tion provides step-by-step instru tions for the initial setup of your devi e. If you are
onfiguring more than one StorCenter, ompletely onfigure one devi e before starting up the next
devi e.
1. The StorCenter Manager opens automati ally to begin the Devi e Setup Wizard. Cli k Next
NextNext
Next to
start the Devi e Setup.
If the StorCenter Manager software does not dete t the storage devi e, the Hardware Setup
Wizard s reen displays explaining how to properly onne t the wiring. On e ommuni ation is
established, the Devi e Setup Wizard begins. Cli k Next
NextNext
Next to start the Devi e Setup. Refer to
troubleshooting for more information.
2. Identify your storage devi e on the network. Enter the following information and li k Next
NextNext
Next
to
ontinue:
Storage Devi e Name
Storage Devi e NameStorage Devi e Name
Storage Devi e Name—
——
—Enter a name to identify the StorCenter devi e on your
network. The devi e name should be unique and annot in lude, spa es, or spe ial
hara ters (su h as " / \ [ ] : ; | & = , + * ? < >).
NOTE:
NOTE: NOTE:
NOTE: If you are onfiguring more than one StorCenter devi e at a time, onfigure
the devi e name before starting up the next devi e.
Storage Devi e Des riptive Name
Storage Devi e Des riptive NameStorage Devi e Des riptive Name
Storage Devi e Des riptive Name—
——
—Enter a des riptive name for the StorCenter
devi e. This should be a more des riptive name.
3. Configure email notifi ation. Enter the following information and li k Next
NextNext
Next to ontinue:
Notifi ation Email Address
Notifi ation Email AddressNotifi ation Email Address
Notifi ation Email Address—
——
—Enter one or more valid email addresses, separated by
spa es. When problems are dete ted by the system, the devi e will send notifi ation
messages to all of the email addresses in this list.
Page
10
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...

Additional Credentials Required
Additional Credentials RequiredAdditional Credentials Required
Additional Credentials Required—
——
—Che k this option only if your network has a
orporate firewall that blo ks SMTP traffi , requiring additional redentials for SMTP
messages to pass through. Most users will not need to he k this option. If this box
is he ked, enter the following additional information to identify your SMTP server:
Email Server (SMTP)
Email Server (SMTP)Email Server (SMTP)
Email Server (SMTP)—
——
—Enter the address of your SMTP server.
Sender Email Address
Sender Email AddressSender Email Address
Sender Email Address—
——
—Enter an email address for the StorCenter Devi e to use as
the From address when it reates messages.
Email Login
Email LoginEmail Login
Email Login—
——
—Enter the username used to log into the email a ount you entered
above.
Email Password
Email PasswordEmail Password
Email Password—
——
—Enter the password for the email a ount.
Confirm Password
Confirm PasswordConfirm Password
Confirm Password—
——
—Confirm the password for the email a ount. It must mat h the
password provided above.
Send a test email message
Send a test email messageSend a test email message
Send a test email message—
——
—Cli k this option if you wish to onfirm that the email
notifi ation is working properly. A onfirmation page will appear upon su ess. Cli k
OK to return to the Devi e Setup.
4. Set the devi e lo k. First, hoose a time zone from the pull-
down list. Next, hoose how your
time will be set:
Internet Time Server
Internet Time ServerInternet Time Server
Internet Time Server—
——
—Che k the Automati ally syn hronize with an Internet time
server he k box to use the default time server. To spe ify a ertain time server,
he k Spe ify the time server and type the URL of the Internet time server you wish
to use in the Server text box.
Manually
ManuallyManually
Manually—
——
—Un he k the Automati ally syn hronize with an Internet time server he k
box. In the text boxes that appear, enter the urrent Date (MM/DD/YYYY), Time
(hh:mm), and sele t either AM or PM.
5. Save your settings.
Cli k Apply
ApplyApply
Apply
to save your settings. If the settings were su essfully applied, a onfirmation page
displays a summary of the setup settings. If you have hanged the default devi e name (storage),
when you li k Apply, the Restart Required page displays. Cli k Apply to restart your StorCenter
Devi e. When the devi e is restarted, your onne tion may be temporarily lost, and you may need
to log into the devi e Manager when the onne tion is restored.
You should now see a Congratulations page ontains your StorCenter Devi e name and its
network IP address, and links to the two Shared Folders, publi and Ba kups, that were reated
on your StorCenter Devi e. The StorCenter Devi e will attempt to onne t these Shared Folders to
folders on your lo al omputer. On Windows systems, drive letters will automati ally be assigned
to the onne ted Shared Folders.
Page
11
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...


From the Congratulations page, you an a ess your Shared Folders, read the Feature Overview,
and onfigure Retrospe t.
If you wish to onfigure the more advan ed features of the StorCenter devi e, see the help
system by li king the i on.
You an now begin using your StorCenter Devi e. You an also perform the following optional
onfiguration tasks as needed:
| top of page |
 Conne ting to the StorCenter
 Configuring the StorCenter
 Configuring Network Servi es
 Changing the Default Language
 Changing the Devi e Name
 Changing the Date and Time
 Parti ipating in Windows Networks
 Filenaming Conventions
 Prote ting Your Data
 Managing Users
 Managing Groups
 Managing Shared Folders
 Erasing the StorCenter
 Setting Disk Prote tion
 Che king Devi e Status
 Configuring Email Notifi ation
 Updating the Firmware
 Ba king Up Your Files to the
StorCenter
 Conne ting External Storage
 Conne ting USB Printers
 Using Your Devi e with a Digital
Camera
 Using the Media Server
 Using Video Surveillan e
 Sear hing for Files
 Resetting the StorCenter
 Using Remote A ess
 Browsing the StorCenter via the
Shared Storage Tab
 Torrents Downloads
 Managing Quotas
 Se urity Settings
 Port Forwarding
Page
12
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...



HomeProdu tsSupport & DownloadsGlobal Sites
produ t registration
support poli y onta t ussite helporder assistan e
Sign up for email offers
Enter Email Here
 
Looking for Something?
Our apologies, the page you have requested is not available at this time. For your
onvenien e we have listed some of our most ommonly requested pages here.
Iomega North Ameri a Home page Links to Iomega®
produ ts, orporate
information, and data storage solutions.
Online Store Shop online, the easy and risk-
free supplier for your Iomega produ ts.
Current Produ ts
Iomega has a solution for your data management needs!
Support & Downloads
Our Online Customer Support & Downloads site makes it easy
to get the help you need! Find how-
to information & answers to ommon questions,
download user's manuals, get help around the lo k via e-
mail & 1
or download the latest software & drivers for your produ t!
Sear h
If you would prefer, you may use the onsite sear h engine by typing in your
keyword in the sear h box at the top right and li king sear h.
Sitemap See the Iomega North Ameri a Web Site at a glan e.
Lega y Produ ts
The produ ts in this se tion are no longer being manufa tured by
Iomega, although some may still be available through a variety of sour es.
Page
13
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...


© 2010 Iomega Corporation
Page
14
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...



Using the StorCenter
Using the StorCenterUsing the StorCenter
Using the StorCenter
Conne ting to Shared Folders
Conne ting to Shared FoldersConne ting to Shared Folders
Conne ting to Shared Folders
The simplest way to onne t to the shared folders on your StorCenter devi e is to run the
StorCenter Manager software. StorCenter Manager is in luded on the Solutions CD that
ame with your drive. On e installed, the StorCenter Manager software will run
automati ally. StorCenter Manager will automati ally onne t you to the shared folders that
you have permission to a ess. You an onfigure whi h shares are automati ally
onne ted by li king A ess Shared Folders
A ess Shared FoldersA ess Shared Folders
A ess Shared Folders on the StorCenter Manager Home s reen.
Simply he k the folders to whi h you wish to be onne ted and li k Apply
ApplyApply
Apply. On e
StorCenter Manager has onne ted to the shared folders, your omputer should re onne t
to the StorCenter automati ally every time it is restarted. StorCenter Manager is available
for Windows, Ma OS X, and Linux.
In some ases, you may wish to onne t to the shared folder without using the StorCenter
Manager. The following instru tions des ribe how this is done:
Mapping a Drive Letter in Windows:
Mapping a Drive Letter in Windows:Mapping a Drive Letter in Windows:
Mapping a Drive Letter in Windows:
This pro ess will map a drive letter to the StorCenter devi e.
 Conne ting to the StorCenter
 Configuring the StorCenter
 Configuring Network Servi es
 Changing the Default Language
 Changing the Devi e Name
 Changing the Date and Time
 Parti ipating in Windows Networks
 Filenaming Conventions
 Prote ting Your Data
 Managing Users
 Managing Groups
 Managing Shared Folders
 Erasing the StorCenter
 Setting Disk Prote tion
 Che king Devi e Status
 Configuring Email Notifi ation
 Updating the Firmware
 Ba king Up Your Files to the
StorCenter
 Conne ting External Storage
 Conne ting USB Printers
 Using Your Devi e with a Digital
Camera
 Using the Media Server
 Using Video Surveillan e
 Sear hing for Files
 Resetting the StorCenter
 Using Remote A ess
 Browsing the StorCenter via the
Shared Storage Tab
 Torrents Downloads
 Managing Quotas
 Se urity Settings
 Port Forwarding
Page
15
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...

1. Open an Explorer window.
2. Sele t Map Network Drive...
Network Drive...Network Drive...
Network Drive... from the Tools
ToolsTools
Tools menu.
3. Sele t the Drive letter to whi h you wish to map the shared folder.
4. In the Folder text area, enter \\<IP Address>\<Share Name>
\\<IP Address>\<Share Name>\\<IP Address>\<Share Name>
\\<IP Address>\<Share Name> or
\\<Devi e Name>\<Share Name>
\\<Devi e Name>\<Share Name>\\<Devi e Name>\<Share Name>
\\<Devi e Name>\<Share Name>.
NOTE:
NOTE:NOTE:
NOTE: <Devi e Name>
<Devi e Name><Devi e Name>
<Devi e Name>
refers to the Storage Devi e Name setting you entered during
the initial onfiguration. <Share Name>
<Share Name><Share Name>
<Share Name>
refers to the shared folder you would like to
a ess. The default folders on the StorCenter devi e are publi
publipubli
publi and Ba kups
Ba kupsBa kups
Ba kups. If you
have reated users there also may be a shared folder for ea h user.
Example: \\StorCenter\publi or \\192.168.0.55\publi
\\StorCenter\publi or \\192.168.0.55\publi\\StorCenter\publi or \\192.168.0.55\publi
\\StorCenter\publi or \\192.168.0.55\publi
5. Che k the Re onne t at Login
Re onne t at LoginRe onne t at Login
Re onne t at Login option if you wish to re onne t to this drive letter
when restarting your omputer.
6. Cli k Finish to onfirm the drive map.
7. Enter the Username and Password, if ne essary, to onne t to the shared network
folder.
8. Verify that the mapped network drive shows up orre tly in My Computer.
NOTE:
NOTE:NOTE:
NOTE: You may need to map new drive letters if you make hanges to StorCenter devi e
users and shares.
| top of page |
A essing Shares in Ma OS X:
A essing Shares in Ma OS X:A essing Shares in Ma OS X:
A essing Shares in Ma OS X:
If you are using Ma OS X v. 10.5 (Leopard) the StorCenter devi e should automati ally
appear in the left hand navigation bar of the Finder window under the heading SHARED
SHAREDSHARED
SHARED. In
some ases, you may need to li k on ALL...
ALL...ALL...
ALL... and browse to your network drive. If you are
using a version of Ma OS X other than 10.5 or ould not find your network drive, use the
following instru tions:
1. Sele t Conne t to Server...
Conne t to Server...Conne t to Server...
Conne t to Server... from the Finder's Go
GoGo
Go menu.
2. Enter smb://<Devi e IP address>
smb://<Devi e IP address>smb://<Devi e IP address>
smb://<Devi e IP address> or smb://<Devi e Name>.lo al.
smb://<Devi e Name>.lo al.smb://<Devi e Name>.lo al.
smb://<Devi e Name>.lo al., then li k
Conne t
Conne tConne t
Conne t.
NOTE:
NOTE:NOTE:
NOTE: <Devi e Name>
<Devi e Name><Devi e Name>
<Devi e Name>
refers to the Storage Devi e Name setting you entered during
the initial onfiguration.
Page
16
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...


NOTE:
NOTE:NOTE:
NOTE: See Finding the IP Address in Ma OS X for information of finding the IP
address or devi e name of the StorCenter devi e.
3. Enter a user name and password (required only if you have enabled permissions),
then li k Conne t
Conne tConne t
Conne t, otherwise li k the Guest
GuestGuest
Guest radio button and li k Conne t
Conne tConne t
Conne t. The
default shares do not require a user name or password.
4. Sele t the share you wish to mount, then li k OK
OKOK
OK.
5. The share will appear on the Desktop.
| top of page |
Page
17
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...




Finding the IP Address in
Finding the IP Address in Finding the IP Address in
Finding the IP Address in Ma OS X
Ma OS XMa OS X
Ma OS X
To find the StorCenter devi e on your network:
NOTE:
NOTE:NOTE:
NOTE: The lient omputer must be on the same subnet or network segment as the
StorCenter devi e.
1. Laun h the Terminal appli ation lo ated in the Utilities folder.
2. Enter the ommand findsmb
findsmbfindsmb
findsmb and hit enter
enterenter
enter. This may take a moment to run.
3. The findsmb tool will return a list of all the devi es it finds on your network. Lo ate
the StorCenter devi e on the list.
NOTE:
NOTE:NOTE:
NOTE: The default name for your StorCenter devi e is Storage
StorageStorage
Storage. If you have hanged
the name of your StorCenter devi e, look for that name on the list.
Use the IP address or devi e name listed in findsmb to onne t to shared folders.
| top of page |
Page
18
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...



Using the StorCenter
Using the StorCenterUsing the StorCenter
Using the StorCenter
Configuring the StorCenter devi e
Configuring the StorCenter devi eConfiguring the StorCenter devi e
Configuring the StorCenter devi e
You an ustomize your StorCenter devi e by hanging the advan ed onfiguration
settings. These settings in lude: User Management, Workgroup and Domain membership,
External Storage and Printer Management, Media Server Settings, et .
The simplest way to onfigure these settings is to run the StorCenter Manager software
that is in luded on the Solutions CD. Log into the management utility using the
administrator username and password you reated during the initial setup of the
StorCenter devi e. Cli k on the Settings
SettingsSettings
Settings tab to begin working with the StorCenter devi e
settings. For more information on the advan ed settings, see the help system by li king
the i on.
You an also enter the onfiguration tool by entering the IP address or devi e name in your
web browser (e.g., http://<storage>
http://<storage>http://<storage>
http://<storage> or http://192.168.0.55
). If you have enabled se urity,
you will be required to enter the administrator username and password. Cli k on the
Settings
SettingsSettings
Settings
tab to begin working with the StorCenter devi e settings. For more information on
the advan ed settings, see the help system by li king the i on.
 Conne ting to the StorCenter
 Configuring the StorCenter
 Configuring Network Servi es
 Changing the Default Language
 Changing the Devi e Name
 Changing the Date and Time
 Parti ipating in Windows Networks
 Filenaming Conventions
 Prote ting Your Data
 Managing Users
 Managing Groups
 Managing Shared Folders
 Erasing the StorCenter
 Setting Disk Prote tion
 Che king Devi e Status
 Configuring Email Notifi ation
 Updating the Firmware
 Ba king Up Your Files to the
StorCenter
 Conne ting External Storage
 Conne ting USB Printers
 Using Your Devi e with a Digital
Camera
 Using the Media Server
 Using Video Surveillan e
 Sear hing for Files
 Resetting the StorCenter
 Using Remote A ess
 Browsing the StorCenter via the
Shared Storage Tab
 Torrents Downloads
 Managing Quotas
 Se urity Settings
 Port Forwarding
Page
19
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...


| top of page |
Page
20
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...