ION Health USB WRIST BLOOD PRESSURE MONITOR User manual

USB WRIST BLOOD
PRESSURE MONITOR
QUICKSTART GUIDE
ENGLISH ( 3 – 21 )
GUÍA DE INICIO RÁPIDO
ESPAÑOL ( 22 – 40 )
GUIDE D’UTILISATION RAPIDE
FRANÇAIS ( 41 – 59 )
GUIDA RAPIDA
ITALIANO ( 60 – 78 )
KURZANLEITUNG
DEUTSCH ( 79 – 97 )
SNELSTARTGIDS
NEDERLANDS ( 98 – 116 )
MANUAL VERSION 1.0
2011.08.31

3
BEFORE YOU START
WARNINGS AND PRECAUTIONS
•Do NOT use this device on infants or persons who cannot
communicate. Doing so may lead to serious accidents.
•This device does not serve as a cure of any symptoms or
disease. The data measured are only for reference.
•Always consult your physician to have the results interpreted.
•Use of this device near a mobile phone or microwave oven
may cause inaccurate results.
•Do not use this device for purposes other than measuring
blood pressure.
•Disassembly or modification the unit or wrist cuff may lead to
permanent reading errors.
•This device is not able to measure in the presence of
common arrhythmia, such as atrial or ventricular premature
beats or atrial fibrillation. It may produce reading errors.

4
INTENDED USE
Thank you for purchasing the ION Health USB Blood Pressure
Monitor. This device measures blood pressure non-invasively
based on the oscillometric method. This device is designed for
individuals age 18 and above for home use only. Please read
these instructions carefully before using the device. For other
questions regarding this monitor, please contact ION Health.
Please keep your receipt after purchasing this product. To
register your product online, please visit our website:
http://www.ionhealthonline.com
Features:
•One-touch, accurate results in 20 seconds.
•Comfortable automatic inflation and deflation.
•Memories for readings up to 352 sets, with time/date and
automatically calculated average.
•Automatic power-off after 3 minutes of no activity.

5
HEALTH INFORMATION
Knowing your blood pressure trend can help you tell whether
your body is in good condition or not. Human blood pressure
naturally increases after reaching middle age. This symptom is a
result of continuous aging of blood vessels. Further causes
include obesity, lack of exercise, and cholesterol (LDL) adhering
to the blood vessels. Rising of blood pressure accelerates
hardening of the arteries, and the body becomes more
susceptible to apoplexy and coronary infarction. The World
Health Organization (WHO) has published the following
guideline of blood pressure range:
Grade 3 Hypertension ("too high")
Grade 2 Hypertension ("moderate")
Grade 1 Hypertension ("mild")
High – Normal
Normal
Optimal
Systolic
Diastolic

6
ABOUT THE DEVICE
Box Contents:
•Blood pressure monitor
•Wrist cuff
•USB cable
•Software CD
•Storage case
•2 AAA batteries
•Quickstart Guide
Please check the box to ensure you have everything listed
above. If not, please return the product where you purchased it.

7
OVERVIEW
Power Button
Set Button
Memory Button LCD
Date
Time
Inflation
Deflation
Measurement
Units
Battery Symbol
Pulse Rate
Average
Memory
Symbol
Pulse
Symbol
Diastolic
Pressure
Systolic
Pressure
Buzzer

8
BEFORE USE
Your monitor comes with batteries already installed. When
replacing them, use ONLY 1.5V AAA size alkaline batteries.
Please use alkaline batteries for the best performance and the
longest life.
Low Power Warning: The monitor will
remind you when the power is getting low by
displaying two different messages:
•The Battery Symbol appears with
your test result. This means it is
nearly time to change the batteries
(although still 30 more measurements
can be made).
•The Battery Symbol flashes by itself.
This means you must change the
batteries before making any
measurements.

9
Batteries Installation and Replacement:
1. Please make sure the device is
turned off. Press the edge of the
battery cover and push upward.
Note: Replacing the batteries does
not affect previous test results stored
in the device, but you may need to
update the settings.
2. Remove the battery cover then
remove the batteries inside.
Note: Do not use different type, date
or brand name batteries together.
Use only new batteries of the
required size and type.
3. Insert two 1.5V AAA size alkaline
batteries. Make sure the "+"
(positive) and "–" (negative) ends
match those indicated in the battery
compartment. If inserted correctly,
you will hear a "beep."

10
Setting the Device:
Your monitor comes with the time, date,
and measurement units preset. These
options may be changed any time to fit
your needs. They also need to be set
again after you change the batteries.
1. With the monitor turned off,
remove the battery cover as
shown in previous page. Press the
Set Button located in the battery
compartment to enter Setting
Mode.
2. Press the Set Button to select what you would like to
change. The selected one will be flashing. Press the
Memory Button to make change.
3. Save the Changes by pressing the Set Button and move
on to the next step.