ION IPA18D User manual

Quickstart Guide
English

3
BOX CONTENTS
HOUSE PARTY
Audio Cable with 1/8” (3.5mm)
connectors
Power Adapter
Quickstart Guide
Safety Instructions & Warranty
Information Booklet
Quickstart Guide (English)
Support
For product registration, visit the ION website: ionaudio.com
For the latest information about this product, visit
ionaudio.com/houseparty
For additional product support, visit ionaudio.com/support
For safety/warranty information, visit ionaudio.com/warranty
WARNING: DO NOT splash or immerse in water or other liquids.
Not for use in rain. Use only in dry locations.
WARNING: DO NOT look directly into the dome light. Do not sit, stand, or apply pressure on the dome light.
Quick Setup/ Connection Diagram
1. Make sure all items listed in Box Contents at the beginning of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. Move Light Mode switch to OFF.
4. Turn down the Master Volume on the House Party.
5. Turn on House Party.
6. Connect your music player with an audio cable or Bluetooth (see Connecting with a Bluetooth Device
for more details on this).
7. Adjust the volume on your music player and on House Party as needed.
8. Adjust the Light Mode switch on House Party as needed.
9. Turn off House Party when not in use.
Diagram and Parts Description
1. Microphone Input with Volume Control (1/4"): This
mono input accepts a 1/4" input such as a
microphone, guitar, or other musical instrument.
2. Auxiliary Input: This stereo 1/8” input can be used to
connect a smartphone, MP3 player, or other audio
sources.
3. Bluetooth®: The Paired LED will be lit when a device is
paired to HOUSE PARTY. This LED will not be lit when
HOUSE PARTY is first powered on (unless it was
previously paired with a device). Press the Disconnect
button to disconnect a paired Bluetooth device.
4. Master Volume Control: This adjusts the speaker’s main
mix volume, which includes Microphone Input, Auxiliary
Input, and the audio of a paired Bluetooth device.
TOP PANEL
MP3 PLAYER
(not included) REAR PANEL
POWER
Power Adapter: 12V DC,
3A, Center pin-positive, tip
negative (included)
MICROPHONE (not included)
Included Audio Cable
with 1/8” (3.5mm)
connectors
1
2
3
4
56
7
*WARNING: Do not look directly into the
dome light. Do not sit, stand, or apply
pressure on the dome light.
Please use the included
power supply or equivalent
only.

4
5. Power LED: Indicates whether HOUSE PARTY is on or
off.
6. Light Mode: There are three modes to select from for
how the strobe lights react to the music.
•Beat = the light reacts to the beat of the music.
•Party = dome light spins and changes color
whether there is music playing or not.
•Off = the light is off and the lights in the dome are
not spinning.
7. Dome: The lights in the dome can spin and react to the
music playing (depending on the Light Mode that is
selected).
8. Power Adapter Input: Insert the included power
adapter here to power the unit.
9. Power ON/OFF Switch: Turns HOUSE PARTY on or off.
10. Fans: These air intake and air outtake vents operate when Light Mode is turned on to ensure the light
dome operates efficiently.
Note: Please ensure these vents do not get covered or blocked.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also,
try to reduce the overall volume of HOUSE PARTY.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the
microphone away from the speaker.
If you can’t hear the microphone over the music volume: Turn down the music volume from your source.
Connecting with a Bluetooth Device
1. Turn on HOUSE PARTY using the power switch.
2. Navigate to your Bluetooth device’s setup screen, find “ION Speaker” and connect.
Note: The next time you approach HOUSE PARTY with your Bluetooth device, it will automatically re-
connect.
Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.
3. If your Bluetooth device is not able to connect to HOUSE PARTY, press the Bluetooth Disconnect
button on HOUSE PARTY to break previous Bluetooth connections and reset the Bluetooth module.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
4. Paired LED will light up solid when it is 'paired'.
5. Start music playback from your Bluetooth device.
6. To connect to another Bluetooth device, press the Bluetooth Disconnect button. Repeat Step 2.
7. To disconnect a connected Bluetooth device, press the Bluetooth Disconnect button.
Note: If you experience trouble connecting or playing music, update your device's OS.
8
9
10
10

5
Appendix (English)
Technical Specifications
Dimensions: (L X W X H): 7.5” x 8” x 12"; 191 mm x 203 mm x 305 mm
Weight: 5.15 lbs.; 2.31 kg
Microphone Type: Dynamic microphone recommended (not included)
Power Adapter: 12V DC, 3A, Center pin-positive, tip negative; Input Voltage 100-240V AC, 50/60 Hz
Output Power: 8W Peak
Frequency Response: (±3dB): 50 Hz – 30 kHz (Aux)
Supported Bluetooth Profile: A2DP
Bluetooth Range: Up to 100 feet*
Specifications are subject to change without notice.
*Bluetooth range is affected by walls, obstructions, and movement. Best performance is achieved in a wide
open area.
Trademarks and Licenses
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by ION Audio is under license.
All other product or company names are trademarks or registered trademarks of their
respective owners.
For the electrostatic discharge (ESD) test of EN301 489-1/17, it was found that manual operation is needed to
resume normal operation as intended after the test.

www.ionaudio.com
MANUAL DRAFT v1.6

IMPORTANT SAFETY INSTRUCTIONS &
WARRANTY I NFOR M ATI ON
ENGLISH ( 3 ± 13 )
INSTRUCCIONES IMPORTANTES DE SEGURIDAD E
INFORMACIÓN DE LA GA RANTÍA
ESPAÑOL ( 14 ±21 )
INSTRUCTIONS IMPORTANTES DE SÉCURITÉ ET
INFORMATIONS DE G ARANTIE
FRANÇAIS ( 22 ± 29 )
ISTRUZIONI IMPORTANTI DI SICUREZZA E LE
INFORMAZIONI DELLA GARANZIA
ITALIANO ( 30 ± 37 )
WICHTIGE SICHERHEITSANWEISUNGEN UN D
GARANTIEINFORMATIONEN
DEUTSCH ( 38 ± 45 )

2

PRODUCT WARRANTY (U.S.A.)
1. What is covered and for how long?
ALL PRODUCTS: inMusic Brands, Inc. ("inMusic") warrants to the original
purchaser that ION Audio products and all other accessories are free
from defects in material and workmanship under normal use and service
for the period commencing upon the date of purchase from an authorized
ION Audio dealer and continuing for the following period of time after that
date for ninety (90) days. ION Audio warrants factory-refurbished
merchandise to be free of material and operational defects for a period of
ninety (90) days from the original date of retail sale. This refurbished
merchandise warranty is not transferable.
2. What is not covered? This Limited Warranty is conditioned upon proper use of
the product by the purchaser. This Limited Warranty does not cover:
¦Damage caused by improper installation or improper connection to
any peripheral
¦Damage caused by an external electrical fault
¦Damage from use of parts not manufactured or sold by ION Audio
¦Product purchased from anyone other than an ION Audio
authorized dealer
¦Modifications to product not approved in writing by ION Audio
¦Equipment that has the serial number removed or made illegible
¦Normal cosmetic and mechanical wear
¦Damage or loss during transit to an Authorized ION Audio Repair Center
¦Units that are purchased and/or located outside of the continental USA
3

3. What are inMusic's obligations? During the applicable warranty period, ION
Audio will repair or replace, at ION Audio's sole option, without charge to the
purchaser, any defective component part of the product. To obtain
service under this Limited Warranty, purchaser must first contact ION Audio and
obtain a return authorization number ("RA#"). Purchaser must then return the
product to ION Audio in an adequate container for shipping,
accompanied by purchaser's sales receipt or comparable proof of sale
showing the date of purchase, the serial number of the product, and the
seller's name and address. To obtain an RA# and assistance on where to
return the product, contact ION Audio customer service at 401-658-3743. Upon
receipt, ION Audio will repair or replace the defective products. ION Audio may,
at ION Audio's sole option, use rebuilt, reconditioned, or new parts or
components when repairing any product or replace a product with a rebuilt,
reconditioned, new or comparable product. Repaired products will be warranted
for a period equal to the remainder of the original Limited Warranty on the
original product or for 90 days, whichever is longer. All replaced parts,
components, boards, and equipment become the property of ION Audio. If
ION Audio determines that any product is not covered by this Limited Warranty,
purchaser must pay all parts, shipping, and labor charges for the repair or
return of such product.
4. What are the limits on inMusic's liabilities? THE WARRANTIES GIVEN IN
THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES
COVERING ION AUDIO PRODUCTS, INCLUDING WITHOUT LIMITATION
ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, INMUSIC OR ION AUDIO SHALL NOT BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR
DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY,
OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE,
MISUSE OR INABILITY TO USE ANY ION AUDIO PRODUCT, BREACH
OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED
TO INMUSIC'S OR ION AUDIO'S OWN NEGLIGENCE, EVEN IF INMUSIC,
ION

4

AUDIO, OR THEIR AGENTS HAVE BEEN ADVISED OF SUCH
DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY
ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE
WARRANTY FOR ION AUDIO PRODUCTS, AND IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER
OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.
IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY
OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY
OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED
TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of product failure between purchaser and
ION Audio, and ION Audio's product pricing reflects this allocation of risk and
the limitations of liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of ION Audio are not authorized to make
modifications to this Limited Warranty, or make additional warranties binding on
ION Audio or inMusic. Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do not constitute warranties
by ION Audio or inMusic and should not be relied upon.
5. How does state law apply to this warranty? SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY
NOT APPLY TO PURCHASER.
This Limited Warranty gives you specific legal rights. You may also have other rights,
which vary from one jurisdiction to another.
5

PRODUCT WARRANTY (NON - U .S.A.)
1. inMusic Brands, Inc. ("inMusic") warrants to the original purchaser that ION Audio products
are free from defects in material and workmanship under normal use and service for
the period commencing upon the date of purchase from an authorized ION Audio
dealer and continuing for the following period of time after that date for (1) Year.
2. This Limited Warranty is conditioned upon proper use of the product by the purchaser.
This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical or electrical stress, modification of any part of the product,
or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c)
all plastic surfaces and other externally exposed parts that are scratched or damaged due to
normal use; (d) defects or damage from improper testing, operation, maintenance,
installation, adjustment, or service of the products.
3. During the applicable warranty period, ION Audio will repair or replace, at ION Audio's sole
discretion, without charge to the purchaser, any defective component part of the product. ION
Audio may, at ION Audio's sole discretion, use rebuilt, reconditioned, or new parts or
components when repairing any product or replace a product with a rebuilt,
reconditioned, new or comparable product.
4. THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY
IMPLIED WARRANTIES COVERING ION AUDIO PRODUCTS, INCLUDING WITHOUT
LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
INMUSIC OR ION AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF
PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER
OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ION
AUDIO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT
NOT LIMITED TO INMUSIC'S OR ION AUDIO'S OWN NEGLIGENCE, EVEN IF
INMUSIC, ION AUDIO, OR ITS AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES,
OR FOR ANY CLAIM BROUGHT AGAINST
6

PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE
COMPLETE WARRANTY FOR ION AUDIO'S PRODUCTS, AND IS GIVEN IN LIEU
OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF
THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF
ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT
AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of product failure between purchaser and ION Audio, and
ION Audio's product pricing reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees, distributors, and dealers of ION
Audio are not authorized to make modifications to this Limited Warranty, or make additional
warranties binding on ION Audio or inMusic. Accordingly, additional statements such as
dealer advertising or presentation, whether oral or written, do not constitute warranties by
ION Audio or inMusic and should not be relied upon. Some jurisdictions do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights which
vary under local laws.
Please record the serial number of your unit as shown on the back of the chassis as well as the
name of the dealer from whom you purchased the unit. Retain this information and your
original purchase receipt for your records. Go to our web site ionaudio.com to register your product
with us.
MODEL: PURCHASED FROM:
SERIAL NUMBER: DATE OF PURCHASE:
7

RETURN INF O RMATI O N
 A Return Authorization number must be obtained from your local ION
Audio
Representative. For your representative go to ionaudio.com.
 A copy of the original sales receipt must also be included for the equipment to
be repaired under warranty.
 The faulty equipment must be packed in its original packaging.
 One additional outer layer of packaging must be included to ensure
product safety. Failures to do so may inadequately protect the equipment in
transit and, therefore, jeopardize the customer's warranty.
 ION Audio will not accept C.O.D. shipments and no call tags will be issued for
merchandise return.
 ION Audio will not return repaired merchandise to customers by priority service,
unless by written request at the customer's cost. Requests must be submitted in
writing with merchandise returned.
 The defective ION Audio equipment should be sent, FREIGHT PREPAID with
Return Authorization number clearly printed on the outer packaging and original
sales receipt enclosed to your local service center
8

IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachment/accessories specified by the manufacturer.
12. Use only the cart, stand, tripod, bracket or table specified by the
manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Power Sources - This product should be connected to a power supply only of
the type described in these operating instructions, or as marked on the unit.
16. Internal/External Voltage Selectors - Internal or external voltage selector switches, if
any,
should only be reset and re-equipped with a proper plug for alternative voltage by a qualified
service technician. Do not attempt to alter this yourself.
17. Water and Moisture - This product should be kept away from direct contact with liquids.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
9

18. CAUTION ±Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type. Batteries (a battery pack or an installed battery)
shall not be exposes to excessive heat such as sunshine, fire, etc.
19. Where the mains plug or an appliance coupler is used as the disconnect device,
the
disconnect device shall remain readily operable.
20. Protective earthing terminal: The apparatus should be connected to a
mains socket outlet with a protective earthing connection.
a. Finland (Suomi): Laite on liitettävä suojamaadoituskoskettimilla
varustettuun pistorasiaan.
b. Norway (Norge): Apparatet må tilkoples jordet stikkontakt.
c. Sweden (Sverige): Apparaten skall anslutas till jordat uttag.
21. This symbol means the equipment is a Class II or double-insulated electrical appliance. It
has been designed in such a way that it does not require a safety connection to electrical
earth.
22. Do not install this equipment in a confined or "boxed-in" space such as a bookcase or
similar unit, and maintain good ventilation conditions. The ventilation should not be
impeded by covering the ventilation openings with items such as newspaper, tablecloths,
curtains, etc.
23. This apparatus is for professional use only.
24. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable
tie). Be careful not to damage the power cord. Before using it again, make sure the power
cord has not been damaged. If the power cord has been damaged at all, bring the unit and
cord to a qualified service technician for repair or replacement as specified by
the manufacturer.
25. WARNING: Excessive sound pressure (high volumes) from headphones can cause
hearing loss.
26. WARNING: Please refer to any important information (e.g., electrical, safety, etc.) printed
on the exterior bottom enclosure or rear panel before installing or operating the product.
SERVICE INS T RUCTIONS
 Disconnect power cord before servicing.
 Replace critical components only with factory parts or recommended equivalents.
 For AC line powered units ±Before returning repaired unit to user, use an ohmmeter to
measure from both AC plug blades to all exposed metal parts. The resistance should
be more than
2,000,000 ohms.

10

SAFETY NO TIC E S
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE ANY
COVER . NO USER-
SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
DANGEROUS VOLTAGE:The lightning flash with arrowhead symbol
within the equilateral triangle is intended to alert the user to the presence of
un- insulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS:The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying this
appliance.
SA 1965
SA 1966
WARNING:To reduce the risk of fire or electrical shock, do not expose this appliance to
rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.
CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
NOTICE CONCERNING LASER PRODUCTS: DANGER: INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE
OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications
not expressly approved by the part responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
11

interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
a) Reorient or relocate the receiving antenna.
b) Move this unit.
c) Increase the separation between the equipment and receiver.
d) Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
e) Be sure that all cables are properly shielded, using a choke or ferrite where appropriate.
f) Consult the dealer or an experienced radio/television technician for help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT
MAY CAUSE UNDESIRED OPERATION.
FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
ESD / EFT Warning:This unit may contain a microcomputer for signal processing
and control functions. In very rare situations, severe interference, noise from an
external source, or static electricity may cause it to lock up. In the unlikely event
that this should happen, turn off the unit, wait at least five seconds, and then turn it
back on again.
In an environment with radio frequency interference, the unit may malfunction and resume normal
operation after removal of the interference.
For best audio quality, avoid using this device in a high RF-radiated environment.
This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out
in the radio interference regulations of the Canadian Department of Communications.
For 240-volt use in U.K., use NEMA-style 240-volt plug. For other countries use proper plug for local
outlet.
12