2
The iOptron #8453 Electronic Automatic Focuser
(iEAF) is a Standalone Focuser designed for both
Crayford and Rack-and-Pinion focusers. It is
powered by a 5V USB port. The focuser is ASCOM
compatible and will work with most planetarium and
imaging software. It also can be adjusted manually
by pressing a button on the focuser.
Features:
Whisper quiet operation
Powerful stepper motor
Zero backlash
Built-in temperature sensor
USB connection to a computer
ASCOM compatible
Manual adjustment
Position memorizing during power off
Compatible to most focuser with proper
mounting bracket/adapter
Package includes:
1X iEAF
1X Mounting Plate
4X Flexible Adapter, for a focuser with 1
5mm, 6mm, 7mm or 8mm shaft
3X Allen wrench (2,3,4mm)
USB 2.0 cable for focuser control and power
2X M5X10mm socket head screw and
washer
2X M4X8mm socket head screw and
washer
Installation:
Shown here is a refractor with a dual speed focuser
as an example.
1. Remove the coarse tuning knobs. Check the
focuser shaft diameter. And install a proper
flexible adapter.
Current, the adapter supports a shaft with a
diameter 5, 6, 7 or 8mm. 4mm adapter is
optional.
2. Attach iEAF Mounting Plate to focuser base.
3. Slide iEAF motor axle into the other end of the
Flexible Adapter. Secure the motor onto te
Mounting Plate. Tighten two set screws on the
Flexible Adapter.
4. Plug USB cable into the USB port on the iEAF.
Connect the other end to a PC for computer
control via ASCOM, or plug into a 5V USB
charger/power tank to power the iEAF for
manual adjusting.
