iOttie Easy One Touch 6 User manual

Easy One Touch 6
User Manual
CD Slot Mount

Easy One Touch 6
User Manual
CD Slot Mount
English
French
Italian
German
Spanish
04
10
16
22
28

5
Product Information
At a Glance
Product Specifications
Installation
Attaching the Mount
Adjusting the Mount
Easy One Touch Mechanism
01
02
Index
For optimal mounting, please follow the
detailed instructions within this manual when
using the Easy One Touch 6. iOttie is not liable
for damages due to product misuse.
01 Product Information
Easy One Touch
Trigger Button
Locking
Side Arms
Release
Bars
Foot
Rotating
Ball Joint
CD Slot Connector
Cord Organizer
Cradle Knob
At a Glance

76 EN
Product Specifications
Item Specification
Length 4.1"
Width 4.31"
Height 4"
Weight 3.57 oz
Universal design fits
all smartphone and
case combinations.
Note: The CD slot connector is designed to bend
slightly. You may need to press down on the top
rubber support when inserting the mount into
your vehicle’s CD slot.
Mount rotates 360º
for optimal viewing
angles.
MAX 3.5"
MIN 2.3"
02 Installation
Assembling the Mount
1. Connect the mount
cradle to the CD
slot connector, then
tighten the cradle
knob.
2. Insert the mount into
the CD slot.
Remember to remove all CDs from the CD
player before using your Easy One Touch 6 to
avoid possible damage to the product and your
vehicle.

98 EN
[ Mounting ]
[ Releasing ]
2. Press your device
against the Easy
One Touch trigger
button.
The mount’s arms
will automatically
close on contact.
Squeeze the
release bars
again to release
your device.
1. Squeeze the release
bars.
Cradle Knob
To rotate the cradle,
loosen the cradle knob.
Tighten to lock into
desired position.
Adjusting the Mount
Bottom Foot
To adjust the bottom
foot, pull it down or
push it up. There are 5
total height settings.
Easy One Touch Mechanism
The Easy One Touch lock and release
mechanism makes it simply to mount and
retrieve your smartphone in seconds.