IP Camera 3-AXIS User manual

User Manual
3-AXIS INDOOR DOME
IP CAMERA

2
WARNINGS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
DO NOT CHANGE THE LENS
CAUTION: THIS CAMERA DESIGN IS BASED ON THE
INCLUDED LENS. LENS REPLACEMENT MAY CAUSE
INSTABILITY OF IMAGE QUALITY.
PLEASE REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.

CONTENT
V1.0_130124
PrefaceI. ..................................................... 4
Product SpecicationsII. .............................. 4
Product InstallationIII. ................................... 7
Monitor SettingA. ........................................................................... 7
Hardware InstallationB. .................................................................. 8
IP AssignmentC. .......................................................................... 10
Install ActiveX controlD. ............................................................... 12
Live VideoIV. ............................................... 18
IP Camera CongurationV. ........................ 20
SystemA. ..................................................................................... 21
NetworkB. .................................................................................... 25
A/V SettingC. ............................................................................... 45
Event ListD. .................................................................................. 52
Network CongurationVI. ............................ 61
I/O CongurationVII. .................................... 63
Factory DefaultVIII. ....................................... 66
Universal PasswordIX. ................................ 67
Package ContentsX. .................................. 70
SD Card CompatibilityXI. ............................ 71

4
PrefaceI.
This IP Camera is a 5 Megapixel indoor dome IP camera with the web server
built in. User can view real-time video via IE browser. IP Camera supports simul-
taneously H.264, Motion JPEG & MPEG4 video compression and dual stream-
ing which provides smooth and high video quality. The video can be stored in
the SD card and played back remotely. With user friendly interface, it is an easy-
to-use IP camera which is designed for security application.
Product SpecicationsII.
Main Features:
5 Megapixel 3-Axis Indoor Dome•
3D+2D Digital Noise Reduction•
Support Digital Wide Dynamic Range•
Day&Night Switch time control manully•
IR LED Built-in 15 Meter•
Power over Ethernet available•
Video output•
H.264/ M-JPEG / MPEG4 compression•
SD card backup•
Support iPhone/iPad/Android•
SDK for Software Integration•
Free Bundle 36 ch recording software•
HLC-1NCF Specication
Hardware
CPU ARM Cortex A9
RAM 256MB
Flash 16MB
Image sensor 1/3.2” 5 Megapixel CMOS sensor
Sensitivity (AGC ON) Color : 0.5 Lux@ F1.8 (IR Off)
B / W: 0 Lux @F1.8(IR On)
Lens Type Vari-focal Lens 3-9mm@F1.8
Angle of View 28.9° ~ 93.59° (horizontal)
22.3° ~ 71.5° (vertical)
ICR Mechanism IR cut Filter (optional)

5
LED Built-in 18 IR LED
IR Distance 15M
I/O DI / DO
Video output Yes
3-Axis Gimbal
Adjustments Angle
Pan: 172∘
Tilt: 30∘~ 90∘
Rotation: 360∘
Audio G.711(64K) and G.726(32K,24K) audio compression
Input : External Mic In
Output: External Audio Out
Power over Ethernet Yes, PoE Class 0 (IEEE802.3af)
Power consumption DC12V: 3.96W(IR Off), 5.52W(IR On)
PoE : 4.8W(IR Off), 6.72W(IR On)
Operating Temperature 0°C ~ 45°C
Dimensions 132mm (φ)x 108.4mm(H)
Weight 680g
Network
Ethernet 10/ 100 Base-T
Network Protocol IPv6, IPv4, HTTP, HTTPS, SNMP, QoS/DSCP, Access list,
IEEE 802.1X, RTSP, TCP/ IP, UDP, SMTP, FTP, PPPoE,
DHCP, DDNS, NTP, UPnP, 3GPP, SAMBA, Bonjour
System
Video Resolution
2592x1944@15fps, 2048x1536@15fps,
1600x1200@15fps, 1280x960@15fps,
1920x1080@30fps, 1280x720@30fps, 640x480@30fps,
320x240@30fps, 176x144@30fps
Video Adjust Brightness, Contrast, Hue, Saturation, Sharpness, Shutter
Speed adjustable, AGC, Sense-Up, D-WDR, Flip, Mirror,
Noise reduction, Day&Night adjustable, White Balance
Triple Streaming Yes
Image snapshot Yes
Full screen monitoring Yes
Privacy Mask Yes, 3 different areas
Compression format H.264/ M-JPEG/ MPEG4(3GPP only)
Video bitrates adjust CBR, VBR
Motion Detection Yes, 3 different areas
Triggered action Mail, FTP, Save to SD card, DO, SAMBA
Pre/ Post alarm Yes, congurable

6
Security Password protection, IP address ltering, HTTPS
encrypted data transmission, 802.1X port-based
authentication for network protection
Firmware upgrade HTTP mode, can be upgraded remotely
Simultaneous connection Up to 10
SD card management
Recording trigger Motion Detection, IP check, Network break down (wire
only), Schedule, DI
Video format AVI, JPEG
Video playback Yes
Delete les Yes
Client System requirement
OS Windows 7, 2000, XP, 2003, Microsoft IE 6.0 or above,
Chrome, Safari, Firefox
Mobile Support iOS 4.3 or above, Android 1.6 or above.
Hardware Suggested Intel Dual Core 2.8G,RAM: 4GB
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

7
Product InstallationIII.
Monitor SettingA.
Right-Click on the desktop. Select “ Properties”1.
Change color quality to highest (32bit).2.

8
Hardware InstallationB.
Dome Installation Steps1.
3-Axis Diagram2.
Use the 3-Axis bracket to adjust the camera to appropriate angle.
Use screws to lock the a.
bottom of camera to the
ceiling or the wall.
Use 3-Axis to adjust the b.
lens angle.
Close the dome cover.c.
Tighten the screw on the d.
cover to x it.

9
Connector Instruction3.
The Cable and connector is as below. Connect power adaptor first,
then connect the IP Camera to PC or network, and set up the network
configurations according to the network environment. About I/O setting,
please refer to chapter VII in User Manual: "I/O Conguration" for detail.
PoE ( Power Over Ethernet)(Optional) 4. 802.3af PoE Switch is recommended
Power over Ethernet (PoE) is a technology that integrates power into a
standard LAN infrastructure. It enables power to be provided to the network
device, such as an IP phone or a network camera, using the same cable as
that used for network connection. It eliminates the need for power outlets at
the camera locations and enables easier application of uninterruptible power
supplies (UPS) to ensure 24 hours a day, 7 days a week operation.

10
IP AssignmentC.
You can use the software“IP Installer” to assign the IP address of IP Camera. 1.
The software is in the attached CD.
There are two language versions of IP installer. Choose one as your need:2.
IPInstallerCht.exe: Chinese version
IPInstallerEng.exe: English version
There are 3 kinds of IP conguration.3.
Fixed IP (Public IP or Virtual IP)a.
DHCP (Dynamic IP)b.
Dial-up (PPPoE)c.
Execute IP Installer4.
For Windows XP SP2 user, the following message box may pop up. Please 5.
click “Unblock”.
IP Installer conguration:6.

11
IP Installer will search for all IP Cameras connected on Lan. Click “Search 7.
Device” to refresh the result list.
Click one of the IP Camera listed on the left side. The network conguration 8.
of this IP camera shows on the right side. You may change the “name” of the
IP Camera as your preference (eg: Ofce, warehouse). Change the parameter
and click “Submit” . It will apply the change and reboot the Device.
Please make sure that the IP address of your PC and IP Camera are on the 9.
same subnet.
The same Subnet:
IP CAM IP address: 192.168.1.200
PC IP address: 192.168.1.100
Different Subnets:
IP CAM IP address: 192.168.2.200
PC IP address: 192.168.1.100
To Change PC IP address:
Control Panel→Network Connections→ Local Area Connection Properties→
Internet Protocol (TCP/IP) → Properties
A quick way to access remote monitoring is to double-click the selected IP 10.
Camera listed on “Device list” of IP Installer. An IE browser will be opened.

12
If you link to the IP Camera successgully, there pops a box asking you to log 11.
in. Please key in the default user name"admin" and password"admin" when
you link to the IP Camera for the rst time. You can revise the user name and
password later. Please refer to Chapter V: "A.2. User Management".
Install ActiveX controlD.
To users of IE 6.0 above1.
At the first time you access the camera via IE, it will ask you to install the
ActiveX component. If the installation failed, please check the security setting
for the IE browser.
Follow the steps: IE→Tools → Internet Options… → Security Tab → a.
Custom Level… → Security Settings.
Find the option "Download unsigned ActiveX control"→ Select “Enable” or
Prompt.
Find the option "Initialize and script ActiveX controls not marked as safe" →
Select “Enable” or Prompt.

13
1 2
3 4
5
When popup the following dialogue box, click “Yes”.

14
You can choose another way. Go to: IE→Tools → Internet Options… → b.
Security Tab → Trusted sites → Add the IP address and click "OK".
In the site list you can key one single IP address or a LAN address. For
example, if you add "192.168.21.*", all the IP address under .21 LAN will
be regarded as trusted sites.

15
Use Non-IE Web Browser2.
If you use refox or google chrome to access the IP camera but fail to watch
the live video, please follow the steps to install necessary tools:
(the following pictures are based on chrome.)
You may see the prompt message as the picture below. First, Click the link: a.
"Firstly, please install Microsoft Visual C++ 2010 Redistributable Package
(x86)."
The link conducts you to the Microsoft ofcial site that you can (i)
download the tools. Please select the language and click "download".
In the pop-up window, please tick the rst and the third le as (ii)
the picture below. Click "Next" to download both "Microsoft .NET
Framework 4 Client Prole (Web Installer)" and "Microsoft Visual C++
2010 Redistributable Package (x64)".

16
After ninshing downloading, execute the two les respectively to install (iii)
them.The windows may ask you to reboot the PC when the installation
nished.
Then, Click the second link "Please click here to download the installation b.
program which does not support IE browser." to download Setup ActiveX.
After fininshing downloading, execute the files to install ActiveX. Then
restart the browser.

17
If you execute the steps above but still cannot see the live video normally, c.
please try the solution:
Search for the le "np_hoem_x.dll" in your system disk. For Windows (i)
XP users, please go to "Start" → "Search" → Search for "All les and
folders" and key in "np_hoem_x.dll". For Windows 7 users, please use
the search bar on the top-right of the Windows Explorer.
Delet all the les named "np_hoem_x.dll". They're the ActiveX control (ii)
tools having been installed in your computer, but the old version
of ActiveX might not compatible with the new version of browser.
Therefore, we delete them in order to install the latest ActiveX control.
Start your web browser, and repeat the step 2-b: "Download the (iii)
installation program which does not support IE browser" to download
and install ActiveX.

18
Live VideoIV.
Start an IE browser, type the IP address of the IP camera in the address eld. It
will show the following dialogue box. Key-in the user name and password. The
default user name and password are “admin” and “admin”.
When the IP Camera is connected successfully, it shows the following
program interface.
1. : Get into the administration page
2. : Video Snapshot

19
Show system time, video resolution, and video refreshing rate3.
Adjust image, 1/2x, 1x, 2x4.
Select video streaming source 5. (If in”Video Setting” the streaming 2 setting is
closed, this option will not appear here.)
IP Camera supports 2-way audio. Click the “Chatting” check box, then you 6.
can use microphone connected to the PC to talk to the Camera side.
Show how many people connect to this IP camera.7.
Tick the Relay out "ON" box to trigger the relay output for testing. Tick "Off" to 8.
stop triggering.
Right-Click the mouse on the video, it will show a
pop-up menu.
Snapshot: Save a JPEG picture1.
Record Start: Record the video in the local PC. It will ask you where to save 2.
the video. To stop recording, right-click the mouse again. Select “Record
Stop”. The video format is AVI. Use Microsoft Media Player to play the
recorded le.
Mute: Turn off the audio. Click again to turn on it. 3.
The "mute" botton does not affect the playback recording video. As long as
the "IP Camera to PC" option in the audio setting is enabled, all the audio will
be recorded into the playback video even you click "mute" in the live page.
Full Screen: Full-screen mode.4.
ZOOM: Enable zoom-in and zoom-out functions. Select “Enable digital zoom” 5.
option rst within the pop-up dialogue box and then drag and drop the bar to
adjust the zoom factors.
Frame Buffm Sec: This function is to build a temporary buffm to accumulate 6.
several video frame. This function can make video smooth-going when the
Network speed is slow and lag. If you select “100”, then it plays video after
100 mSec when starting receiving images from camera. The slower the
Network is, the bigger value should be selected. The default value is null.

20
IP Camera CongurationV.
Click to get into the administration page as below.
Click to back to the live video page.