IPC DAS WP-5231M-CE7 Series User manual

WP-5231M-CE7 Quick Start, E-mail: [email protected]om
1
Version 1.0, February 2017
What’s in the Box?
In addition to this guide, the package includes the following items:
Technical Support
WP-5000-CE7 User Manual
CD:\WinPAC_AM335x\Wp-5231\Document\
http://ftp.icpdas.com/pub/cd/winpac_am335x/wp-5231/document/
1
Configuring the Boot Mode
Before starting any installation, be sure
that the switch is placed in the “0” position.
WP-5231M-CE7 Quick Start
WP-5231M-CE7
A microSD card and a
micro SD/SD adapter
M3x6L Screw * 4
44 mm DIN-Rail Clip * 1
Software
Utility CD
Screw Driver
2.4 mm
Pin Terminal * 16

WP-5231M-CE7 Quick Start, E-mail: [email protected]om
2
2
Connecting to PC, Monitor and Power Supply
i. Connect the mouse or keyboard to the USB port.
ii. Connect PC to the Ethernet port through an Ethernet switch.
iii. Connect the monitor to the VGA port.
iv. Connect the power supply (+12 to +48 VDC) to PWR and GND
terminals, and then turn on the WinPAC.
3
Using PAC Utility to Manage the WinPAC
Step 1: Double-click the PAC Utility shortcut on the desktop

WP-5231M-CE7 Quick Start, E-mail: [email protected]om
3
Step 2: Configure IP address (DHCP), FTP Server, Auto Execution
files…, etc
Step 3: Reboot the WinPAC for changes to take effect
4
Changing the User Interface Language
Step 1: Click Start menu, point to Settings, click Control Panel, and
then click Regional Settings

WP-5231M-CE7 Quick Start, E-mail: [email protected]om
4
Step 2: Click User Interface Language tab, choose to your local
language, and then click OK
Step 3: Run the PAC Utility, and then reboot the WinPAC for
changes to take effect
5
Inserting and Wiring to the XV-Board
XV-Board expansion I/O modules are
used to expand the functions of the
WP-5231M-CE7.
For more details about XV-Board
expansion I/O modules, please refer to
http://www.icpdas.com/root/product/so
lutions/hmi_touch_monitor/touchpad/xv
-board_selection.html