IPC Eagle CT15 Installation and operation manual

Thank you for your purchase of the IPC Eagle
CT15 Compact Automatic Scrubber.
To keep your Scrubber operating at peak ser-
vice We recommend the following Daily
Maintenance Steps:
1.Transport Scrubber to area where Recovery water will be dumped.
*When transporting Scrubber, please insure that squeegee is raised and machine is tilted back towards you.
2. Insure that Brush and Vacuum controls are in the off position
3. Remove Recovery Tank Lid
4. Remove Top Recovery Tank-Remove cover from dump hose and lower carefully
in to mop sink or drain area
5. Using clean water source, spray out Recovery Tank to remove all debris and ex-
cess dirt
6. With recover tank lid off, check Foam Overflow Float to insure it is free of any de-
bris and moving freely
8. Following Recovery Tank Draining and Cleaning, check water Inlet to insure it is free of
debris, fill clean Solution tank using Clean Water source
9. With Brush off of machine, using clean water source, rinse brush to remove debris
and excess dirt
10. Remove Squeegee Assembly from Scrubber, using clean water source and
wiping cloth, insure to remove excess dirt and debris
11. Following above procedures, place Recovery Tank back in working
position as well as Brush and Squeegee Assembly
12. Plug Charger Plug into Electrical outlet to insure Scrubber is fully charged
for next day’s cleaning
Please call IPC Eagle Technical Support at 800.486.2775 or your local
Service Company at _____________________________