Ipevo Point 2 View User manual

1
2
3
1
2
3
1
2
3
Switch between the three modes shown below using the Mode tabs at the left of the window.
Camera Mode (default)
Shows the live video image and allows
you to focus and take snapshots
cUse menus to adjust view: zoom,
mirror, resolution, etc.
dA focus frame at the center guides
you when bringing Point 2 View into
focus
eClick on-screen icons to focus and
take snapshots
Review Mode
Shows your snapshots and allows you
to easily view and organize them
cUse menus to adjust view (zoom,
rotate) or edit photos (copy, delete)
dThe latest photo appears in the main
screen
eUse thumbnails for quick overview
Full Screen Mode
Shows the live video image in full
screen and allows you to share the
image in presentations
cEsc button returns the screen to
Camera mode
dClick on the screen to hide the icons
and provide an unobstructed image.
Click again to bring the icons back
eFocus/Snapshot icons are available
in this mode also
Quick Start Guide
Point 2 View
www.ipevo.com
Your Point 2 View product package should contain these items:
~ ?^X]c!EXTfDB12P\TaP
~ FTXVWcTSbcP]SfXcWPSYdbcPQ[TPa\
~ D]XeTabP[R[X_U^a[P_c^_b\^]Xc^ab
~ 23fXcW?!Eb^UcfPaTP]SdbTa\P]dP[
~ @dXRZbcPacVdXSTcWXbS^Rd\T]c
Follow these easy steps to install P2V (Point 2 View) software.
Step 1:
8]bTaccWT23A><X]c^h^daR^\_dcTa{bSaXeTP]SU^[[^fcWT
instructions in the setup program.
Step 2:
2^]]TRc?^X]c!EXTfc^PDB1_^ac^]h^daR^\_dcTa
Step 3:
Activate the software. A live video image should appear in the
screen.
2. Installing P2V Software
3. The Software Interface at a Glance
1. Package Contents
~ 23fXcW?!Eb^UcfPaTP]SdbTa\P]dP[
~ @dXRZbcPacVdXSTcWXbS^Rd\T]c

Customer Service (International)
Email: servic[email protected]
Tel: [phone]
4. Taking Snapshot
http://www.ipevo.comGO!
Customer Service (USA)
Email: [e-mail]
Tel: [phone]
2^_haXVWc!(8?4E>8]R0[[aXVWcbaTbTaeTS
Follow these steps to learn how to bring Point 2 View into focus and take a snapshot.
Attach Point 2 View to the stand and
bend, rotate, or stretch it to obtain the
best position for an optimum view. You
may also use your hand to point the
camera, or clip it to a monitor and tilt
or rotate it there.
5. Positioning Point 2 View
Overview of controls
(Hardware)
Step 1: Bring Point 2 View into focus
1TU^aTcPZX]VPb]P_bW^c\PZTRTacPX]cWPch^dPaTX]
Camera mode and the image is in focus. Toggle the AF switch
or press the Focus key to bring Point 2 View into focus, if
necessary.
Step 2: Take snapshot
Press the Snapshot key. A shutter sound will be generated
and the screen will freeze for a moment, giving you an instant
preview.
Step 3: Review the photo
6^c^ATeXTf\^STCWT]Tf[hcPZT]_W^c^fX[[P__TPaX]
the screen. You can also view previous snapshots using the
thumbnails at the bottom.
(Software – Camera mode)
Snapshot key:
Takes snapshot
Focus key:
1aX]Vb?^X]c!
View into focus
AF Switch:
Selects Autofocus
behavior, Continuous
(C) or Single (S).
Shows current
AF status
Share with others
You can use the side connectors at the
head of the stand to position Point 2
View for viewing documents.
Show yourselfShow what you see
>aW^[S?^X]c!EXTfX]h^daWP]S
You can get as close as 2˝ (5cm)
distance.
.