IPI Breathe Task Chair User manual

BREATHE®SE A T I N G
P.O. Box 8400
Green Bay, WI 54308-8400
Tel [phone] • Fax [phone]
©OEI 2009 Litho in USA Code OE-60880R1/NW709
Operating In truction

Deriving Maximum
Benefits From Your
Breathe®Task
Chair
C.
A.
B. D.
E.
Printed on recycled paper.
Please recycle.
13.5236
B. Lumbar Adjustment, grasp the
levers on each side of the back and
raise or lo er to the desired position.
C. Back Angle, to lock the back at a
given angle, first recline to the desired
position and then pull up on the lever.
To resume free float, push do n on the
lever.
D. Arm Height, to adjust push
the button in and then raise or
lo er the arm.
E. Tilt Tension, adjust by using the
knob directly under the front of the
seat. To increase the tension of the tilt,
turn the dial clock ise. To decrease
tension, turn the dial counter-clock ise.
For maximum support, sit as far back
in the seat as is comfortable and lean
against the backrest.
To benefit from the Breathe chair’s
range of ergonomic features, individual
adjustments need to be made.
Proper cardiovascular circulation
requires the seat be at the correct
height. To achieve the correct height,
your feet should be flat on the floor.
A. Seat Height is adjusted ith a
pneumatic cylinder. To lo er height
hile seated, lift the lever at the right
front of the seat. To raise the height,
remove your eight from the seat
hile lifting the lever.