IQ Touch L Series User manual
1
IQTouch L Series
——User Manual——
2
Content
Charter1: Notice............................................................................3
Charter2: Ports and Buttons..........................................................4
Charter3: Remote Control .............................................................6
Charter4: Communication Protocols Basic Operation....................7
Charter5: Product Installation and Testing.....................................7
5.1 Connect Device with external PC .............................................................................7
5.2 Connect Device to built-in OPS................................................................................9
Charter 6: Menu Functions..........................................................10
Charter7: Pull-up Menu...............................................................14
Charter8: Android Interface.........................................................14
Charter9: Built-in OPS /External Computer Interactive Function..17
Charter10: Troubleshooting.........................................................18
3
Charter1: Notice
Thanks for purchasing our IQ product. This product has been tested before shipping, but
incorrect using may lead to fire hazard. For safety, please read these instructions
completely before using the equipment.
- Be strictly adhered to all instructions when operating the product, which has dangerous
high voltage inside the product.
- Only use attachments/accessories specified by the manufacturer.
Safety Instructions:
- Protect the power cord from being tread upon or pinched otherwise it may cause hazard.
- Please keep your hands dry when unplug the power cord from the outlet.
- Keep the device away from over-heated, over-cooled or damp environment, and don’t
place the device under direct sunshine.
- Holes on the casing are designed for ventilation and heat dissipation. To gain fully
ventilation, please always keep at least 10cm clearance between the wall and equipment.
- Please do not install the product in embedded facility unless there is good ventilated
device.
- Please place this product on flat ground to prevent from falling and damaging.
- Operate your device only from the type of power source indicated on the marking label.
This device only works forAC 100-240V.
- Do not overload power outlets and extension cords because this can result in a risk of
fire or electric shock.
- Unplug this device from the power outlet and ask qualified technician under the
following conditions:
• The power cord is damaged or abrasion.
• Fall from high place or case damage.
• Stuffor liquid fall into the machine.
• Unusual sound, smell etc.
•Abnormal phenomenon during using. Machine fails to work after operating by instruction.
- Replacement parts
When replacement parts are required, make sure that the replacement parts specified by
the manufacturer that have the same characteristics with previous one.
- Transit
When a cart is used for product transit, please pay attention to protect the screen panel.
Avoid damage from falling down caused by over-brake and over-force.
4
- Cleaning
Unplug your machine before cleaning. Do not use liquid or chemical cleaners. A damp
cloth is suggested to clean the exterior of your machine. The screen panel must be
cleaned with soft wet cloth and alcohol, solvents, or ammonia liquid is banned.
- Environment
The screen image quality may become poor when the device is removed from low to high
temperature environment or screen face to the air-conditioner. Be sure to make the fog
evaporated before using.
Charter2: Ports and Buttons
Pic.1: Front ports and buttons
5
Pic.2: Side and bottom ports
HDMI: Connect external PC with IQTouch by HDMI cable
USB3.0/USB2.0/TV-USB: USB interfaces to connect USB keyboard/U disk/Mobile HD
Touch USB: For external PC connection to realize touch function
EARPHONE: Earphone/audio device connection
YPbPr IN: For external video devices, STB/DVD, etc.
AV IN 1/2: For external video devices, STB/DVD, etc.
AV OUT: The monitor signal output of TV set can be used as signal source
SPDIF: Audio device connection
RS232: External devices with RS232 connection:
VGA IN: Connect external PC with IQTouch by VGA cable
VGA OUT: IQTouch signal output through VGA to realize dual screen display of IQTouch and
external device.
AUDIO IN: Audio output of PC
LAN: connect the WAN/LAN
SD CARD: Expand TV storage with TF card
RF IN: Radio-frequency signal input to connect TV
6
Charter3: Remote Control
Pic.3: Remote control
Note: The functions on the Remote
Control are different by model.
NO Button Function
1.
Power on/off
2.
Mute
3. 0~9 Input digit/”space” in OPS mode
4. Alt +Tab Change window in OPS mode
5. Alt +F4 Close window in OPS mode
6. PgUp/PgDn Next/previous page in ops mode
7.
Reset
Restore system
8.
Start menu in OPS mode
9.
Right button in OPS mode
10. Up/down/left/right button
11.
Active touch TV application in ops mode
12. Esc/Exit Stop current operation or exit menu
13. VOL+/VOL- Control sound volume
14. CH+/CH- Select different input source
15. Input Select different input source
16. Menu Open/close menu
17.
Open/close backlight
18.
PC
OPS computer shortcut
19.
VGA
VGA mode shortcut
20. HDMI HDMI mode shortcut
21. MEDIA Multi-media mode shortcut
22. Sleep Sleep timing shutdown
23. Display Show program info.
24. P.Mode Select picture mode
25. S.Mode Select sound mode
26.
F1/
Sleep timing shutdown
27.
F2/
Select sound mode
28.
F4
Correspond to computer buttons F1-F12
29.
F5/
30.
F6/
31. F7/
32. F8
33. F9
34. F10
35. F11
36.
F12
*
:Only part of device support this feature
7
Charter4: Communication Protocols Basic Operation
RS_232 Communication Protocol
Baud Rate: 115200 Data Length: 8 bit
Communication Code: ASCII Stop Bit: 1 bit Use a straight-through cable
Function
Communication Protocols
Function
Communication Protocols
POWER 99 A2 01 01 27 AA Right 99 23 25 01 DA AA
SOURCE 99 23 13 01 EC AA OK 99 23 26 01 D9 AA
TV 99 23 07 01 F8 AA Menu 99 23 12 01 ED AA
AV 99 23 08 01 F5 AA Home 99 23 00 01 FF AA
YPBPR
99 23 OA 01 f5 AA
Mute
99 23 02 01 FD AA
VGA
99 23 OB 01 F4 AA
VOL+
99 23 17 01 E8 AA
HDMI
99 23 OE 01 F1 AA
VOL-
99 23 17 01 E7 AA
UP
99 23 22 01 DD AA
ECO
99 23 16 01 E9 AA
DOWN
99 23 23 01 DC AA
PC
99 23 11 01 EE AA
LEFT
99 23 24 01 DB AA
Multi-Media
99 23 27 01 D8 AA
Basic Operation:
1) Power on/off
Connect the power plug to power outlet. Hold the “power” button on the device or the
Remote Control to power on. Hold the “power” button again to power off the device.
2）The image and audio setting will be saved when the device is shut down.
Charter5: Product Installation and Testing
5.1 Connect Device with external PC
1. Minimum Configuration Requirement of External PC
*With 2.1GHZ CPU above (recommend: Intel core2 duo above PC/notebook)
*1G DDR1 RAM above (recommend: 2G DDR2 above)
*128G HDD
*USB/VGA/HDMI ports
*Window7/Window8/Window10
2. Installation and connection
1) Connect IQTouch toAC100~240V via power cord.
2) Connect VGA & Audio cable or HDMI to IQTouch
8
Pic. 4: connect IQ touch to external computer
3) Connect Touch USB Cable
①ConnectA type of USB cable to the USB port of computer.
②Connect B type of USB cable to the touch USB port of IQTouch
Touch USB Cable
Pic. 5: Touch USB Connection
4) Connect external computer to Device
①Connect the computer HDMI/VGA port to device corresponding ports via HDMI/VGA
cable.
②Connect computer USB port to IQTouch USB port via USB cable.
③Plug-in the power cord and start the IQTouch
④Press Input button on the front panel, pull up from the bottom of the screen to show the
pull-up Menu or remote control can select signal source (external computer).
9
5.2 Connect Device to built-in OPS
1. Detachable OPS module configuration
*CPU: Intel i3/i5/i7
*Chipset: Intel
*RAM: 2G/4G DDR3; Mainboard supports up to 8G DDR3
*HHD: 2.5inch 320G/500G/1TB
*Graphics: integrated graphics /discrete graphics
*Resolution: 1920*1080/3840*2160
*System: Windows7/Windows8/Windows10
*Interface: 2*USB3.0 /4*USB2.0/1*RJ45LAN port/1*HDMI output/1*VGA output/1*Audio
output 1*Mic input/1*RS232
2. Installation and Connection
1) Connect IQTouch toAC100~240V via attached power wire.
2) Built-in OPS Audio & Video/touch cables have already connected inside the device.
Pic.6: IQTouch connected with OPS
3) Plug in the power cable and start the IQTouch
4) Press Input button on the front panel, pull up from the bottom of the screen to show the
pull-up Menu or remote control can select signal source (OPS).
10
Charter 6: Menu Functions
Press “Menu” button on the device or Remote Control, the main menu will occur on the
screen, select the desire settings by “Up/Down” button on the Remote Control or
“CH-/CH+” button on the device. Press “Menu” button to exit main menu when the main
menu display on screen
The System Settings include General/Image/Sound/Channel/Network/Intelligent/System/
About.
1.General setting
2. Picture setting
11
3. Sound setting
4. Channel Setting:
This function is only supported by TV input signals.
5. Network Setting:
12
6. Intelligence setting;
7. System setting:
13
8. About setting
14
Charter7: Pull-up Menu
Pull up from the bottom of screen to show the pull-up menu.
Back: Back to the main interface
Home: Enter the Andriod system.
Task: Enter the task interface to display all the tasks you open
Input: Display the input source interface
Menu: Display the system settings interface
VOL-/VOL+: Ajust the device sound
Bright-/Bright+: Adjust the device brightness
Wpanel: Enter the whiteboard function
Scomme: start the annotation
Scshot:Capture the screen
User:Define by user
Charter8: Android Interface
Turn on IQTouch to enter Android interface.
Picture-in-Picture displays windows system.Home icon on the Menu bar that can be
pulled up from the bottom of the screen. Menu key on the remote control can open
Android interface when using other signal sources.
15
1. MediaClass
Multimedia software Including office software, pictures, song, video and local disk
equipment, network SAMBA equipment .
2. Whiteboard
Whiteboard can be used for teaching, such as writing and drawing
3. Teaching resource
After connecting to the Internet, click the icon to open the favorite teaching resource link in
the browser.
4. Browser
Work with internet
16
5. All App
This menu includes system Settings, camera, clock, browser, calculator, timer, download,
one click projection and Microsoft office software, click icon to execute each application
6. Electronic instruction
The pull-up menu is provided with electronic instruction for easy access.
7.Home setting
The home Setting menu provides download application management, network Setting
and general Setting.
Settings
Network Setting General Setting
17
Charter9: Built-in OPS /External Computer Interactive
Function
IQTouch Built-in OPS, which can perform touch operation of various applications on the
screen. It can also connect the external computer through VGA or HDMI to achieve the
display and touch control of external computer contents.
18
Charter10: Troubleshooting
Note: Before seeking repair service, please check the following items to confirm if the
issues can be solved.
Issues
Check items
No sound and image 1.
AC 220V power supply
2. Signal cable connection
3. Power on the Touch TV and
external device
4. Stand-by mode
Image only, without sound
1. Adjust the volume
2. Mute
3. External audio cable
connection
No Image or black-white image 1. Adjust color setting
2.Ajust color mode
Image fuzzy (TV) 1. TV signal issue
2.
TV station issue
Image and Audio with interference
1. Try to far away from the
Interference source
2. Change socket
Remote Control failure 1. Remote Control wrong
direction
2. Battery wrong polarity
3. Remote Control signal
occlusion
Touch function disabled
1. Make sure no other objects
touch at the same time
2. Check no other object on the
touch frame
Touch position is not correct
1. Try the calibration of windows
2. Check the test signal of IR
touch frame
19
Table of contents
