Winmate W07L100-GCO1 User manual

Please read these instructions carefully before using this product, and save this manual for future use.
G-WIN Front IP65
P-Cap Display
W07L100-GCO1
W10L100-GCH1(HB)
R10L100-GCT2(HB)
R12L100-GCM2(HB)
R15L100-GCC3(HB)
Quick Start Guide
V1.1
For more information on this and
other Winmate products, please
visit our website at:
www.winmate.com
Document Part Number: 91521110101B

- 2 -
Contents
Introduction - 8 -
Features - 8 -
Package Content - 9 -
Product Overview - 10 -
Physical Buttons and LED Indicators - 15 -
Getting Started - 17 -
Turning On Your Device - 17 -
OSD Menu Navigation - 18 -
Turning Off Your Device - 19 -
Installation - 20 -
Wiring Requirements - 20 -
Connecting to Other Devices - 21 -
Mounting - 23 -
RAM Mounting - 23 -
VESA Mounting - 24 -
Panel Mounting - 25 -
Troubleshooting - 26 -
Specifications - 27 -
Appendix - 29 -
Appendix A: Cleaning the Monitor - 29 -
Appendix B: Frequency Table - 30 -

- 3 -
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two
conditions:
This device may not cause harmful
interference.
This device must accept any interference
received including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the
limits for a class "B" digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at him
own expense.

- 4 -
European Union
Electromagnetic Compatibility Directive
(2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-
1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
This equipment is in conformity with the requirement of the
following EU legislations and harmonized standards. Product also
complies with the Council directions.

- 5 -
Copyright Notice
No part of this document may be reproduced, copied, translated, or
transmitted in any form or by any means, electronic or mechanical, for
any purpose, without the prior written permission of the original
manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of
their respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to
any product, including circuits and/or software described or contained
in this manual in order to improve design and/or performance. We
assume no responsibility or liability for the use of the described
product(s) conveys no license or title under any patent, copyright, or
masks work rights to these products, and make no representations or
warranties that these products are free from patent, copyright, or
mask work right infringement, unless otherwise specified. Applications
that are described in this manual are for illustration purposes only. We
make no representation or guarantee that such application will be
suitable for the specified use without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be
free from material and workmanship defects for a period of one year
from the invoice date. If the customer discovers a defect, we will, at
his/her option, repair or replace the defective product at no charge to
the customer, provide it is returned during the warranty period of one
year, with transportation charges prepaid. The returned product must
be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by
over 30 days, the in-warranty service will be made according to the
shipping date. In the serial numbers the third and fourth two digits
give the year of manufacture, and the fifth digit means the month (e.
g., with A for October, B for November and C for December).
For example, the serial number 1W16Axxxxxxxx means October of
year 2016.

- 6 -
Customer Service
We provide a service guide for any problem by the following steps:
First, visit the website of our distributor to find the update information
about the product. Second, contact with your distributor, sales
representative, or our customer service center for technical support if
you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers
every business day. We are always ready to give advice on
application requirements or specific information on the installation and
operation of any of our products.

- 7 -
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden
power surges. Only experienced electronics personnel
should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis
lorsque vous travaillez sur celui-ci. Ne pas brancher de
connections lorsque l’alimentation est présente. Des
composantes électroniques sensibles peuvent être
endommagées par des sauts d’alimentation. Seulement
du personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge
before touching the CPU card. Modern electronic
devices are very sensitive to static electric charges. As a
safety precaution, use a grounding wrist strap at all
times. Place all electronic components in a static-
dissipative surface or static-shielded bag when they are
not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute
charge statique avant de toucher la carte CPU. Les
équipements électroniques moderns sont très sensibles
aux décharges d’électricité statique. Toujours utiliser un
bracelet de mise à la terre comme précaution. Placer
toutes les composantes électroniques sur une surface
conçue pour dissiper les charge, ou dans un sac anti-
statique lorsqu’elles ne sont pas dans le chassis.

- 8 -
Introduction
Congratulations on purchasing Winmate® GC65 Display. The
elegantly designed, yet rugged, industrial grade G-WIN GC series is
designed heavy duty applications.
With rugged construction, ultimate computing power, GC65 series are
guaranteed to meet "heavy duty" needs. This series feature high
computing power and user-friendly interface with projected capacitive
multi-touch (P-CAP) technology and support Android, Linux Kernel
and Ubuntu operating systems. Rugged housing provides front IP65
protection against outer dust and water splash.
Features
Winmate® GC65 Display features:
7”, 10.1'', 10.4”, 12.1” and 15” P-Cap touchscreen
Front IP65 for protection against water and dust
A true flat, easy-to-clean front surface with edge-to-edge design
VGA input and variety of optional connectors
USB port for touch
Stylish and elegant design

- 9 -
Package Content
Carefully remove the box and unpack your device. Please check if all
the items listed below are inside your package. If any of these items
are missing or damaged contact us immediately.
Standard factory shipment list:
Display
Quick Start Guide
(Hardcopy)
USB Cable for
Touch (Optional)
Varies by product
specifications
91521110101B
948018102100
AC Adapter
(12V/ 50W)
Power Cable
VGA Cable
922D050W12VA
Varies by country
9441151150P3
HDMI Cable
(Optional)
94E0190190P3

- 10 -
Product Overview
W07L100-GCO1
Unit: mm
№
Description
№
Description
󰪦
12V DC in
󰪩
Touch (USB)
󰪧
HDMI
󰪪
1 Watt Speaker
󰪨
VGA
󰪫
OSD Control Panel

- 11 -
W10L100-GCH1(HB)
Unit: mm
№
Description
№
Description
󰪦
12V DC in
(Optional 9-36V DC)
󰪩
Touch (USB)
󰪧
HDMI
󰪪
1 Watt Speaker
󰪨
VGA
󰪫
OSD Control Panel

- 12 -
R10L100-GCT2(HB)
Unit: mm
№
Description
№
Description
󰪦
12V DC in
(Optional 9-36V DC)
󰪩
Touch (USB)
󰪧
HDMI
󰪪
OSD Control Panel
󰪨
VGA

- 13 -
R12L100-GCM2(HB)
Unit: mm
№
Description
№
Description
󰪦
12V DC in
(Optional 9-36V DC)
󰪩
Touch (USB)
󰪧
HDMI
󰪪
2 Watt Speaker
󰪨
VGA
󰪫
OSD Control Panel

- 14 -
R15L100-GCC3(HB)
Unit: mm
№
Description
№
Description
󰪦
12V DC in
(Optional 9-36V DC)
󰪩
Touch (USB)
󰪧
HDMI
󰪪
2 Watt Speaker
󰪨
VGA
󰪫
OSD Control Panel

- 15 -
Physical Buttons and LED Indicators
Physical buttons and LED indicators (OSD Control Panel) located on
the rear side of the Display.
Physical Buttons
Icon
Button
Description
DOWN/
VOLUME
DOWN
Press to lower down the volume
UP/ VOLUME
UP
Press to increase the volume
ESC/ AUTO
Press to exit the menu
OK/ MENU
Press to confirm the action or to
come back to the main menu
Power On/ Off
Press to power on or power off the
device

- 16 -
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
Blinking
Storage activity
(Data is being read or written)
Off
System is idle

- 17 -
Getting Started
Turning On Your Device
Follow the following steps to turn on your device:
1. Connect the Display to the AC adapter.
2. Connect the AC adapter to the power cord.
3. Plug in the power cord to a working AC wall outlet. Press power
button on the OSD control panel.
CAUTION
Use only the AC adapter (12V/ 50W) included in your
package
(Rating: Output 4.2 A). Using other AC adapters may
damage the device.
ALTERNATING CURRENT
This product must be grounded. Use only a grounded
AC outlet. Install the additional PE ground wire if the
local installation regulations require it.

- 18 -
OSD Menu Navigation
BRICONTRAST
BRIGHTNESS
CONTRAST
CHANNEL
AUTO Scan
ANALOG
HDMI
POSITION
Only support
VGA mode
H position
V position
RECALL
YES
NO
IMAGE
Only support
VGA mode
Auto Adjustment
Clock
Phase
White Balance
OSD EXIT
YES
NO
COLOR
USER
9300K
6500K
ADC
RIGHTNESS
GAMMA
GAMMA0
GAMMA1
GAMMA2
OP
OPTION
VR Brightness
Volume
Speaker

- 19 -
Turning Off Your Device
To turn off the device:
1. Press the power button located on the OSD control panel.
2. Disconnect the power cord from the display to completely power
off the device.

- 20 -
Installation
Wiring Requirements
The following common safety precautions should be observed before
installing any electronic device:
Strive to use separate, non-intersecting paths to route power
and networking wires. If power wiring and device wiring paths
must cross make sure the wires are perpendicular at the
intersection point.
Keep the wires separated according to interface. The rule of
thumb is that wiring that shares similar electrical characteristics
may be bundled together.
Do not bundle input wiring with output wiring. Keep them
separate.
When necessary, it is strongly advised that you label wiring to
all devices in the system.
CAUTION
Do not run signal or communication wiring and power wiring in
the same conduit. To avoid interference, wires with different
signal characteristics (i.e., different interfaces) should be routed
separately.
Be sure to disconnect the power cord before installing and/or
wiring your device.
Verify the maximum possible current for each wire gauge,
especially for the power cords. Observe all electrical codes
dictating the maximum current allowable for each wire gauge.
If the current goes above the maximum ratings, the wiring could
overheat, causing serious damage to your equipment.
Be careful when handling the unit. When the unit is plugged in,
the internal components generate a lot of heat which may leave
the outer casing too hot to touch.