NemaVision-iPC NV-HMI-8 Series User manual

NV-HMI-8XX Series
7”, 8”, 10.1”, 12.1”, 15”, 15.6”, 17”, 18.5”, and 21.5”Intel Bay Trail E3845/N2930,
Fanless Industrial Compact Size Panel PC
User Manual
Release Date Revision
Oct. 2015 V1.2

NV-HMI-8XX Series User Manual
1
Revision History
Reversion
Date
Description
1.0
2015/03/25
Official Version
1.1
2015/07/15
Modify Motherboard Description, add Mounting
Description and BIOS OS Selection on P.67
1.2
2015/10/20
Add “UL”Certificate, Modify OS Support

NV-HMI-8XX Series User Manual
2
Warning!________________________
Avertissement!___________________
Risque de choc électrique - Ne pas faire fonctionner la machine avec son capot
arrière enlevé. Des tensions dangereuses sont élevées à l'intérieur.
Cet équipement génère, utilise et peut émettre une énergie de
radiofréquence et s'il n'est pas installé et utilisé conformément au manuel
d'instructions, il peut provoquer des interférences dans les communications
radio. Il a été testé et approuvé conforme aux limites pour un dispositif de classe
A et selon les règles de la FCC, qui sont conçues pour fournir une protection
raisonnable contre de telles interférences dans un environnement commercial. Le
fonctionnement de cet équipement dans une zone résidentielle est susceptible
de provoquer des interférences, dans ce cas l'utilisateur, à ses propres frais, devra
faire le nécessaire pour prendre toutes les mesures requises pour corriger le
problème.
Electric Shock Hazard –Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.

NV-HMI-8XX Series User Manual
3
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Precaution
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect.
Les piles usagée doivent être recyclées dans la mesure du possible. La mise au
rebut des piles usagées doit resecter les réglementations locales en vigueur en
matière de protection de l'environnement.

NV-HMI-8XX Series User Manual
4
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)

NV-HMI-8XX Series User Manual
5
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.
Consignes de sécurité
Suivez les messages ci-dessous pour éviter que vos systèmes contre
les dommages:
◆Éviter votre système contre l'électricité statique sur toutes les occasions.
◆Évitez les chocs électriques. Ne pas toucher les composants de cette
carte lorsque la carte est sous tension. Toujours débrancher lorsque le
système n'est pas en cours d'utilisation.
◆Couper l'alimentation électrique lorsque vous changez tous les
périphériques matériels. Par exemple, lorsque vous connectez un
cavalier ou d'installer des cartes, une forte augmentation de la
puissance peut endommager les composants électroniques ou
l'ensemble du système.

NV-HMI-8XX Series User Manual
6
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning!/Avertissement!......................................................…………………………….…2
Caution/Precaution……………….……..………………………………………………………………………3
Packing List…………………………………….……………………………………………………………………..4
Safety Precautions/Consignes de sécurité………………………………….…..……………………..5
Chapter 1 Getting Started
1.1 Features………………………..………………………...…………………………..8
1.2 Specifications…………………...………………………………………………….8
1.3 Dimensions………………………....…………………………………………….11
1.4 Brief Description of NV-HMI-8XX…..….………………………….……17
1.5 Installation of HDD –7”/8”…………..…………...…………………..…..22
1.6 Installation of HDD –10.1”/15.6”/18.5”………………………………24
1.7 Installation of HDD –12.1”/15”/17”/21.5”………………….……….25
1.8 VESA Mounting…………………………………..………………………………27
1.9 Panel Mounting……………………………………..………………….……….27
Chapter 2 Hardware
2.1 Motherboard Introduction……………………...……………..………....28
2.2 Specifications…………………………..…………………………………………28
2.3 Jumpers and Connectors Location……………………………………...32
2.4 Jumpers Setting and Connectors…………………………………..……33
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…….……...…………………………61
3.2 BIOS Setup Utility……………………………………………………………….61
3.3 Main Settings……………………………………..………………………………62
3.4 Advanced Settings……………………………………………………………...63
3.5 Chipset Settings……………………………………….………………………...71
3.6 Security Settings…………………………………………….…………………..73

NV-HMI-8XX Series User Manual
7
3.7 Boot Settings…..………………………………………….……………………..74
3.8 Save & Exit Settings……………………………………..…………………....75
Chapter 4 Installation of Drivers
4.1 Intel (R) AtomTM SoC Chipset ………..……...………….………………78
4.2 Intel (R) VGA Chipset……………………………………………….……......81
4.3 Intel (R) LAN Driver………..………………………………………..………...85
4.4 Realtek ALC662 HD Audio Driver Installation………………………88
4.5 USB 3.0 Driver…………………………………………………………………….90
Chapter 5 Touch Screen Installation
5.1 Windows XP/2003/Vista/WIN7 Universal Driver Installation for
PenMount 6000 Series...……………….…………………………………...93
5.2 Software Functions…………………………………………………………..103
Figures
Figure 1.1: Dimensions of NV-HMI-807(P).……………………..……………......11
Figure 1.2: Dimensions of NV-HMI-808(P).……………………..………………...11
Figure 1.3: Dimensions of NV-HMI-810(P).……………………..…………………12
Figure 1.4: Dimensions of NV-HMI-812(P).……………………..…………………12
Figure 1.5: Dimensions of NV-HMI-815(P).……………………..…………………13
Figure 1.6: Dimensions of NV-HMI-816(Resistive Touch)..……….…………13
Figure 1.7: Dimensions of NV-HMI-816(Projected Capacitive Touch)...14
Figure 1.8: Dimensions of NV-HMI-817(P)..……………………………………….14
Figure 1.9: Dimensions of NV-HMI-818(P)….……………………………………..15
Figure 1.10: Dimensions of NV-HMI-821(Resistive Touch)………………….15
Figure 1.11: Dimensions of NV-HMI-821(Projected Capacitive Touch).16
Figure 1.12: Front View of NV-HMI-8XX Series…………………………………..17
Figure 1.13: Rear View of NV-HMI-807/808……………………………………..…18
Figure 1.14: Rear View of NV-HMI-810………………………………………….….18
Figure 1.15: Rear View of NV-HMI-812………………………………………….….19
Figure 1.16: Rear View of NV-HMI-815………………………………………….….19
Figure 1.17: Rear View of NV-HMI-816……………………………………….….….20
Figure 1.18: Rear View of NV-HMI-817……………………………………….….….20
Figure 1.19: Rear View of NV-HMI-818………………………………………….….21
Figure 1.20: Rear View of NV-HMI-821………………………………………………21
Figure 1.21: NV-HMI Series VESA Mounting………………………………………27
Figure 1.22: NV-HMI Series Panel Mounting……………………………………...27

NV-HMI-8XX Series User Manual
8
Figure 2.1: Motherboard Dimensions………………………………………….…….31
Figure 2.2: Jumpers and Connectors Location-Board Top……………….….32
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..…32
Chapter 1 Getting Started
1.1 Features
7”/8”/10.1”/12.1”/15”/15.6”/17”/18.5”/21.5” Industrial Compact Size Panel PC
Flat front panel touch screen
Fanless design
Intel Bay Trail N2930(1.83GHz) CPU built-in/E3845(1.91GHz) for option
Onboard 2GB DDR 3L 1600 MHz/4GB(option)
9~36VDC wide-ranging power input
IP65 compliant front panel
Optional projected capacitive touchscreen support 7H anti-scratch surface
1.2 Specifications
NV-HMI-8XX Series
System
CPU
Onboard Intel Bay Trail N2930(1.83GHz )/E3845(1.91GHz) for option
Chipset
SoC
Memory
Onboard 2GB DDR 3L 1600 MHz/4GB(option)
IO Port
USB
1 x USB 2.0 type A
1 x USB 3.0 type A
Serial/Parallel
1 x RS-232 DB-9(COM2)
1 x DB-9 RS-232/422/485 (Default RS-232)(COM1)
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power input terminal
1 x 2-pin connector for power on/off button

NV-HMI-8XX Series User Manual
9
Option
(Not available for
NV-HMI-807 and
NV-HMI-808)
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1
2 x CAN bus via TB-528CAN2
2 x USB 2.0 type A Via TB-528U2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 via TB-528C1U2P1
(TB-528C1U2 for NV-HMI-810)
Storage Space
Storage
1 x SD card slot, up to 32GB
1 x MO-297 SATA SSD bay (Easy Accessible) (for 7”/8”)
1 x 2.5" SATA HDD bay for SATA HDD (Easy Accessible)
Expansion
Expansion Slot
1 x Internal Mini-PCIe slot full size
Touch Screen –Resistive Touch Window Type
TS Control IC
PenMount 6000 on Board
Interface
USB
Light Transmission
Over 80%
Touch Screen –Projected Capacitive Type
TS Control IC
Chip on tail
Interface
USB
Light Transmission
Over 90%
Power
Power Input
9~36V/DC
Mechanical
Construction
RAL 9007
IP Rating
IP65 compliant front panel
Environmental
Operating
temperature
0~50°C
Storage temperature
-20~60°C
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A / UL
Operating System Support
OS Support
Windows Embedded Compact 7, Windows Embedded Standard 7, Windows
Embedded 8 Standard, Windows Embedded 8.1 Industry