Irf Pro-en User manual

Overview

Hub IRF Pro-LKIRF001 is able to configure remote control of other products through infrared learning technology. It can realize remote control of

various electrical appliances, supports timers, and can adjust its own light color to provide better atmosphere. Through the Linkoze cloud service, this

low-energy remote can become part of smart scenes, and provide necessary triggers for home automation.

App Installation

Meshhub is the App for controlling Linkoze devices. You can search "Meshhub" in the app store for installation.

Device Pairing

Long press the reset button for 10 seconds and release. The device is ready to be paired when the green LED flashes.

Open the app and click the "+" button in the upper right corner, click 'scan' and scan the QR code on the package to pair the device, or click 'Device' and follow the instructions to complete the p

IRF Pro-EN

User Manual

Pairing Hub IRF Pro to MeshHubPairing Hub IRF Pro to MeshHub

Device learning

Select the type of device you want to control. When the universal remote is learning signal, the blue indicator light will go out temporarily, and it will light up again if the learning is successful or o

The blue indicator light will flash once if the universal remote successfully sends a command after learning.

Device control

It's necessary to ensure the remote is in an ideal network environment. Long press the device in App to access the modification panel.

Please note:

1. If the Wi-Fi password has changed, please reset the device and reconnect.

2. When using infrared control, the distance from the universal remote to the controlled device should not exceed 8 meters/ 26 feet. If the distance is too far, the signal will weaken, and it may fa

Automation

The automation function is available in the App to connect different devices. Each automation contains a series of trigger conditions and target actions. The target actions will be automatically tr

To set up an automation, click the “+” button in the upper right corner of the automation page. For instance, you can use the contact sensor as a trigger condition and create target actions with o

Specifications

Power Input: 5V/1A

Wifi Connectivity: Wi-FI IEEE 802.11 b/g/n 2.4GHz

Charging: USB Type-C

Infrared Frequency: 38KHz

Radio Frequency: 315MHz, 433MHz

Infrared Direction: 180°Hemispherical