iRobot Roomba ADG-N1 User manual

EN
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
This is the safety alert symbol. It is used to alert you to potential physical injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Risk of electric shock Class II equipment Rated power
output, d.c. Read operator’s manual
General symbol for
recycling
Risk of re For indoor use only Rated power
input, d.c.
Keep out of reach
ofchildren Separate Supply Unit
Caution Class III equipment Rated power
input, a.c.
Safety Information
Important Safety Information
SAVE THESE INSTRUCTIONS
WARNING: When using an electrical appliance, basic precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS
WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when setting
up, using, and maintaining your robot.
This owner’s guide includes information for Regulatory Model(s): RVE-Y2, ADG-N1, Battery Model(s): ABL-F,
ABL-D2Ax, ABL-D2Bx (x = 1 or 2)

EN
WARNING: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
NOTICE: Indicates a hazardous situation that, if not avoided, could result
in property damage.
GENERAL
WARNING
• This product comes with a region approved power supply cord and is
designed to be plugged into a standard household AC power outlet
only. Do not use any other power supply cord or power strip. For
replacement cords, please contact Customer Care to ensure proper
selection of country specific power supply cord.
• Do not disassemble or open the dirt disposal unless instructed to do so.
There are no user serviceable parts inside. Refer servicing to qualified
service personnel.
• Risk of electric shock, use indoors in dry location only.
• Do not handle this product with wet hands.
• Do not use unauthorized chargers. Use of an unauthorized charger
could cause the battery to generate heat, smoke, catch fire, or explode.
• This product is not a toy. Small children and pets should be supervised
when the product is operating.
• Do not sit or stand on this product.
• Store and operate this product in room temperature environments only.
• If the room to be cleaned contains a balcony, a physical barrier should
be used to prevent robot access to the balcony and ensure safe
operation.
• Clean cliff sensors for buildup.
• If the room to be cleaned contains equipment, such as a stove, fan,
space heater, or humidifier, remove the equipment before operation.
There is a risk of injury, accident or malfunction if the robot comes in
contact and pushes the equipment.
• This robot is intended for dry floor use only. Do not use this device to pick
up spills. Do not allow your robot or charging station to become wet.
CAUTION
• Do not operate the robot in areas with exposed electrical outlets in the
floor.
• Do not use this device to pick up sharp objects, glass, or anything that is
burning or smoking.
• Be aware that the robot moves on its own. Take care when walking in
the area that the robot is operating in to avoid stepping on it or tripping
over it.
• If the device passes over a power cord and drags it, there is a chance
an object could be pulled off a table or shelf. Before using this device,
pick up objects like clothing, loose papers, pull cords for blinds or
curtains, power cords, and any fragile objects. Extinguish candles. Shut
off space heaters.
• Perform the required maintenance per the Owner’s Guide to ensure safe
operation of the robot and charging station.
NOTICE
• Do not place anything on top of your robot or charging station.
• The failure to maintain cleanliness of charger contacts could result in
loss of ability for the robot to charge the battery.
• Before running your robot on carpets or rugs, ensure that the carpets
or rugs are compatible with vacuums using bars or brushes. Using your
robot on a carpet or rug that is not compatible could result in damage
to your carpet or rug. Contact your carpet or rug manufacturer with
questions on compatibility.
BATTERY
WARNING
• Do not open, crush, heat above 176°F: 80°C, or incinerate. Follow the
Owner’s Guide instructions for proper use, maintenance, handling, and
disposal.
• Do not short-circuit the battery by allowing metal objects to contact
battery terminals or immerse in liquid. Do not subject batteries to
mechanical shock.
• Lithium ion batteries and products that contain lithium ion batteries

EN
are subject to stringent transportation regulations. If you need to ship
this product (with the battery included) for service, travel or any other
reason, you must see the Troubleshooting section of your manual or
contact customer care for shipping instructions.
• Periodically inspect the battery pack for any sign of damage or leakage.
Do not charge damaged or leaking battery packs, do not allow the
liquid to come in contact with skin or eyes. If contact has been made,
wash the affected area with copious amounts of water and seek medical
advice. Place the battery in a sealed plastic bag and recycle or dispose
of safely according to local environmental regulations, or return it to
your local authorized iRobot Service Center for disposal.
CAUTION
• Battery usage by children should be supervised. Seek medical advice
immediately if a cell or a battery has been swallowed.
NOTICE
• The battery pack must be removed from the robot before recycling or
disposal.
• For best results, only use the iRobot Lithium Ion Battery that comes with
the robot.
• Do not use non-rechargeable batteries. Use only the rechargeable
battery supplied with the product. For replacement, purchase identical
iRobot battery or contact iRobot Customer Care for alternative battery
options.
• Always charge and remove the battery from your robot and accessories
before long-term storage.
This symbol on the battery indicates that the battery must not be disposed
of with unsorted common municipal waste. As the end-user, it is your
responsibility to dispose of the end-of-life battery in your appliance in an
environmentally sensitive manner as follows:
(1) returning it to the distributor/dealer from whom you purchased the product;
or
(2) depositing it in a designated collection point
The seperate collection and recycling of end-of-life batteries at the time
of disposal will help to conserve natural resources and to ensure that it is
recycled in a manner that protects human health and the environment. For
more information, please contact your local recycling oce or the dealer
from whom you originally purchased the product. Failure to properly dispose
of end-of-life batteries may result in the negative potential eects on the
environment and human health due to the substances in the batteries and
accumulators.
Note: For battery recycling go to call2recycle.org; or call 1-800-822-8837
AUTOMATIC DIRT DISPOSAL
WARNING
• Do not use if the cord or plug is damaged. If appliance is not working as
it should, has been dropped, damaged, left outdoors or dropped into
water, return it to a service centre.
• Always disconnect your robot from the dirt disposal before cleaning
or maintaining it.
• Do not use the dirt disposal as a step.
• Do not put any object into openings. Do not use with any opening
blocked; keep free of dust, lint, hair and anything that may reduce
air flow.
• To properly maintain your dirt disposal, do not place foreign objects
inside and ensure that it is clear of debris.
• In order to avoid a hazard due to inadvertent resetting of the thermal
cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
• Do not allow liquids to get on or into the dirt disposal.
• Do not pour any liquids into the device and do not immerse in water.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used
by or near children.
• Use only as described in this manual.
• To reduce the risk of electric shock, unplug your dirt disposal before
cleaning.
• Keep the dirt disposal and power cord away from heated surfaces.

EN
NOTICE
• Product may not be used with any type of power converter. Use of power
converters will immediately void the warranty.
• If you live in an area prone to electrical storms, it is recommended that
you use additional surge protection. Your dirt disposal may be protected
with a surge protector in the event of severe electrical storms.
• Do not use without dust bag and/or filters in place.

EN
Roomba™ j9+ Owner’s Guide 1
Top View
Faceplate
Wall Follow Sensor
Camera
Clean Button
About Your Roomba® Robot Vacuum
Bin Release
Button
Bottom View
Charging
Contacts
Caster Wheel
Edge-Sweeping
Brush
Multi-Surface
Brushes
Cli Sensors
Cli Sensors
Brush Frame Release Tab
Brush Caps
Dust Bin & Filter
Floor Tracking Sensor

2 For more information, visit global.irobot.com
EN
Top view
Cord Wrap
Bag Guide Rails
Debris Evacuation
Tube
Debris Evacuation
Tube
Bag Storage
Compartment
Blower Cover
Bag Presence
Sensor
Back view
Bottom view
About your Clean Base™ Automatic Dirt Disposal
Front view
Canister Lid
Visual Docking Target
Exhaust Vent
Debris
Evacuation Port
Pull Tab
LED Indicator
Wheel Wells
Charging
Contacts

EN
Roomba™ j9+ Owner’s Guide 3
Using Your Roomba® Robot Vacuum
• Follow the step-by-step instructions to set up your Roomba.
• Set up Precision Vision Navigation™ to avoid obstacles in real time.
• Set an automatic cleaning schedule and customize cleaning preferences.
• Create smart maps to tell your robot where and when to clean.
Download the iRobot Home App and Connect to WiPositioning the CleanBase™ Automatic Dirt Disposal
Note: Do not place your CleanBase in direct sunlight. Ensure that the area
around the dock is free of clutter to improve docking performance.
WARNING: To prevent the risk of your robot falling downstairs, ensure that
the Charging Station is placed at least 1.2 metres (4 feet) away from stairs.
0.3 m (1 ft)
above
Good Wi-Fi®Coverage
*Objects are not to scale.
1.2 m (4 ft)
from stairs
1.2 m (4 ft)
in front
0.5 m (1.5 ft)
both sides
About Your Automatic Dirt Disposal
While cleaning, your robot will automatically return to the dirt disposal to
empty its bin and recharge as needed.
The dirt disposal’s LED indicator will turn solid red when a new bag is needed.
If a clog is detected, the dirt disposal will trigger additional attempts to
automatically clear the clog.
Note: If you place your robot on the dirt disposal by hand, it will not empty
automatically. In this case, use the iRobot Home App or hold the button
down for 2-5 seconds.

4 For more information, visit global.irobot.com
EN CLEAN
Charging
• Place the robot on the charging station to activate the battery.
• The robot uses a small amount of power whenever it is on the charging station.
You can put the robot in a further-reduced power state when not in use. To put
your robot into reduced power standby mode, remove the dust bin and tap the
clean button 5 times. To exit reduced power standby mode, place your robot
on the charging station and tap the clean button. For more details on this
Reduced Power Standby Mode, refer to the FAQ page on our website.
• For long-term storage, turn off the robot by removing it from the charging
station and holding down the clean button for 3 seconds with one wheel off
the ground. Store the robot in a cool, dry place.
Light Ring Spiral While Charging
White Spiral: charging
Red Spiral: charging, low battery
A solid white light will indicate the battery charge
percentage of your robot
When your robot is fully charged, the light ring
indicator will intermittently pulse white at the rear.
Note: Your robot comes with a partial charge, but we recommend that
you charge the robot for 3 hours prior to starting the first cleaning job.
Cleaning
• Your robot will automatically explore and clean your home. It will return to
the charging station at the end of a cleaning job and whenever it needs to
recharge.
• To end a job and send the robot back to its charging station, hold the clean
button down for 2-5 seconds. A blue light ring pattern will indicate that the
robot is seeking the charging station.
• When your robot detects an especially dirty area, it will engage Dirt Detect™
mode, moving in a forward/backward motion to clean the area more
thoroughly. The light ring indicator will flash blue.
Remove excess clutter from floors before cleaning. Use your
robot frequently to maintain well-conditioned floors.
Just press the clean button
Tap to Start/Pause/Resume
Hold for 2-5 seconds to end a job
When the robot senses its bin needs to be
emptied, the light ring indicator will illuminate
in a red sweeping motion toward the rear.

EN
Roomba™ j9+ Owner’s Guide 5
Care and Maintenance
Part Care Frequency Replacement
Frequency*
Bin Wash bin as needed -
Filter Clean once a week (twice a week
if you have a pet).Do not wash. Every 2 months
Full Bin Sensor Clean every 2 weeks -
Front Caster Wheel Clean every 2 weeks Every 12 months
Edge-Sweeping
Brush and Multi-
Surface Brushes
Clean once a month (twice a
month if you have a pet) Every 12 months
Sensors and
Charging Contacts Clean once a month -
Camera Window Clean and inspect once a
month After 30 washes
To keep your robot running at peak performance, perform the procedures on
the following pages.
There are additional instructional videos in the iRobot Home App. If you
notice the robot picking up less debris from your floor, empty the bin, clean
the filter, and clean the brushes.
Care and Maintenance Instructions for Your Robot
*Replacement frequency may vary. Parts should be replaced if visible wear appears.
Note: iRobot manufactures various replacement parts and assemblies.
If you think you need a replacement part, please contact iRobot
Customer Care for more information.
1
2 2
33
1
Emptying the Bin Cleaning the Filter
Press bin release button to
remove bin.
Open bin door to empty bin. Remove debris by tapping
the filter against your trash
container.
Place bin back in the robot.
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
Important: The robot will
not run if the filter is not
installed correctly. Replace
the filter every two months.

6 For more information, visit global.irobot.com
EN
11
1
2
2
2
3
3
Cleaning the Full Bin Sensors Cleaning the Edge-Sweeping BrushWashing the Bin
Remove and empty the bin. Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
Release the bin, remove the filter, and
open the bin door.
Wipe the inner sensors with a clean, dry
cloth.
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
Rinse the bin using warm water.
Wipe the bin door with a clean, dry cloth.
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Closed Door
Important: Do not wash the filter. Remove
the filter before washing the bin.
Open Door
Note: Bin is not dishwasher safe.

EN
Roomba™ j9+ Owner’s Guide 7
11
3
2
2
3
4
4
5
Cleaning the Front Caster Wheel Cleaning the Multi-Surface Brushes
Pull firmly on the front wheel module to
remove it from the robot.
Remove the brushes from the robot. Remove
the brush caps from the ends of the brushes.
Remove any hair or debris that has collected
beneath the caps. Reinstall the brush caps.
Remove any hair or debris from the square
and hexagonal pegs on the opposite side of
the brushes.
Pinch the brush frame release tab, lift the tab,
and remove any obstructions.
Pull firmly on the wheel to remove it from
its housing (see illustration below).
Remove any debris from inside the wheel
cavity.
Reinstall all parts when finished. Make
sure the wheel clicks back into place.
Remove the bin from the robot and clear
any debris from the vacuum path.
Reinstall the brushes in the robot. Match
the shape of the brush pegs with the
shape of the brush icons in the cleaning
head module
WheelAxle
Important: A front wheel clogged with
hair and debris could result in damage
to your floor. If the wheel is not spinning
freely after you have cleaned it, please
contact Customer Care.
Housing

8 For more information, visit global.irobot.com
EN 1
Cleaning the Sensors, Camera Window and Charging
Contacts
Wipe sensors, camera window, and charging contacts with a clean,
dry cloth.
Important: Do not spray cleaning solution or water onto the
sensors or sensor openings.
Care and Maintenance Instructions for Your Clean
Base
To keep your dirt disposal running at peak performance, follow these
care procedures:
Part Care frequency Replacement frequency
Bags - Bags should be replaced
when prompted by the
LED indicator/app.
Charging Contacts
Visual Docking Target Once every month -
Blower Cover inside
canister Once every month (remove debris from
blower cover)
-
Note: iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.

EN
Roomba™ j9+ Owner’s Guide 9
Note: To achieve optimal
performance with your robot
and automatic dirt disposal,
clean and/or replace your
robot’s lter as needed.
Install a new bag, sliding the
plastic card into the guide rails.
Discard the used bag.
Press down on the lid making
sure that it is completely closed.
4
3
5
Note: This will seal the bag
so dust and debris cannot
escape.
Replacing the Bag
Pull up on the plastic card
to remove the bag from the
canister.
Lift up on the canister lid to
open.
1
2
Removing Debris from Blower Cover
Inspect blower cover for any lint or
debris build-up, and wipe with a
clean dry cloth to remove.
Inspect the visual docking target and
charging contacts to make sure that
they are clear of debris. Wipe with a
clean, dry cloth.
Cleaning the Visual Docking Target and Charging Contacts
Important: Do not spray
cleaning solution or water onto
the sensors or sensor openings.

10 For more information, visit global.irobot.com
EN • Your robot will tell you something is wrong by playing an audio alert and
turning the light ring indicator red. Press the clean button or tap the bumper
for details. Check the iRobot Home App for further support.
Troubleshooting Your Robot
Red Light Ring
Low battery.
Please charge.
• After 90 minutes of inactivity off the charging station, the robot will
automatically end its cleaning job.
• To factory reset your robot, remove the dust bin and hold the clean button
down for seven (7) seconds. A sound will let you know when the factory reset
has been completed. Press the clean button down once more to confirm.
Troubleshooting
Your dirt disposal will tell you if something is wrong via an LED indicator on the
front of the canister and through the iRobot Home App.
This product has been equipped with a thermal protector designed to
protect against damage due to overheating. If the protector operates, the
motor will stop running. If this happens, unplug the unit, allow it to cool for
30 minutes, clear any obstructions from the evacuation port and evacuation
tube, then plug the unit back in.
LED indicator Common error How to x
Solid red Bag full or missing 1. Replace bag if it is full or missing.
2. Make sure that the bag is securely
inserted.
3. If problem persists, remove any
debris from the port on the bottom
of your robot and the dirt disposal.
Blinking red There is a leak or
a clog in the dock
evacuation path
1. Make sure that the canister lid is
pushed down and rmly sealed.
Hold the clean button on your robot
down for 2-5 seconds to manually
empty the bin.
2. Remove any debris from the port on
the bottom of your robot and dirt
disposal.
3. Unplug the dirt disposal from the
wall. Place it on its side and inspect
the debris evacuation tube for
debris. If necessary, remove the
tube to clear any debris.
Troubleshooting Your Automatic Dirt Disposal
Battery Safety & Shipping
• Battery MUST be turned off before shipping.
• Turn off the battery by removing the robot from the charging station
and holding down the clean button for 3 seconds with one wheel off the
ground. All indicators will turn off.
• Package the robot securely for shipping.
• If you need further assistance, contact our Customer Care team or visit
global.irobot.com.
For best results, only use the iRobot Lithium Ion Battery that comes with your robot.
WARNING: Lithium ion batteries and products that contain lithium ion
batteries are subject to stringent transportation regulations. If you need to
ship this product for service, travel or any other reason, you MUST follow the
below shipping instructions.

EN
Roomba™ j9+ Owner’s Guide 11
FCC Supplier’s Declaration of Conformity
iRobot Corporation Roomba Model: RVE-Y2, ADG-N1
Contains FCC ID: 2AATL-6233E-UUB and contains IC: 12425A-6233EUUB
This device complies with part 15 of the FCC Rules and CAN ICES-003(B) /
NMB-003(B).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
• Changes or modications not expressly approved by iRobot Corporation
could void the user’s authority to operate the equipment.
• This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules as well as
CAN ICES-003(B) / NMB-003(B) Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference to radio communication
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
• Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than the necessary for successful communication.
• FCC Radiation Exposure Statement: This product complies with
FCC §2.1091(b) for mobile device RF exposure limits, set forth for an
uncontrolled environment and is safe for the intended operation as
described in this manual. Per FCC requirements, maintain a distance
of more than 8 inches (20 cm) between any person and the host device
(Roomba robot).
• ISED Radiation Exposure Statement: This product complies with the
Canadian Standard RSS-102 for mobile device RF exposure limits, set forth
for an uncontrolled environment and is safe for the intended operation as
described in this manual. Per ISED requirements, maintain a distance of
more than 8 inches (20 cm) between any person and the robot.
iRobot Corporation, 8 Crosby Drive,
Bedford, MA 01730 USA.
http://global.irobot.com
For battery recycling go to call2recycle.org;
or call 1-800-822-8837
Regulatory Information

12 For more information, visit global.irobot.com
EN
USA & Canada
If you have questions or comments about your dirt disposal, please contact
iRobot before contacting a retailer.
You can start by visiting global.irobot.com for support tips, frequently asked
questions, and information about accessories. This information can also be
found in the iRobot HOME App. If you need further assistance, call the US
Customer Care team at [phone].
iRobot USA Customer Care Hours
Monday to Friday, 9AM — 9PM Eastern Time
Saturday and Sunday 9AM — 6PM Eastern Time
Outside USA & Canada
Visit global.irobot.com to:
Learn more about iRobot in your country
Get hints and tips to improve your product performance
Get answers to questions
Contact your local support center
iRobot Customer Care
If you need further assistance, visit
homesupport.irobot.com/s/j9plusownersguide
©2023 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730, USA. All rights reserved.
iRobot is a registered trademark of iRobot Corporation, Roomba Robot Vacuum, Clean
Base and Dirt Detect are trademarks of iRobot Corporation. Wi-Fi and the Wi-Fi logo are
registered trademarks of Wi-Fi Alliance. Apple and App Store are trademarks of Apple Inc.,
registered in the US and other countries. Google Play is a trademark of Google LLC.

FR
Los niños a partir de los 8años de edad y las personas que tengan capacidades físicas, sensoriales
o mentales reducidas, o bien que no posean experiencia ni conocimiento, pueden utilizar este
aparato, siempre y cuando se les haya supervisado e instruido en lo que respecta a la seguridad
en el uso, y que comprendan los riesgos que conlleva. Los niños no deben jugar con el aparato.
Tampoco deben realizar tareas de limpieza o mantenimiento sin supervisión.
Este es el símbolo de alerta de seguridad. Se utiliza para dar alerta sobre posibles peligros de lesiones físicas.
Obedece todos los mensajes de seguridad que siguen a este símbolo para evitar posibles lesiones o la muerte.
Riesgo de descarga
eléctrica Equipo de clase II Salida de potencia nominal, CC Leer el manual del operador
Símbolo general de
reciclaje
Riesgo de incendio Solo para uso en
interiores
Entrada de potencia
nominal, CC
Mantener fuera del
alcance de los niños
Unidad de suministro
independiente
Precaución Equipo de clase III Entrada de potencia
nominal, CA
Consignes de sécurité
Consignes de sécurité importantes
CONSERVEZ CES INSTRUCTIONS
AVERTISSEMENT: Lorsque vous utilisez un appareil électrique, vous devez toujours respecter certaines
précautions de base, notamment:
LIRE TOUTES LES INSTRUCTIONS AVANT L’UTILISATION
AVERTISSEMENT: Pour réduire tout risque de blessure ou de dommage, lisez et respectez les consignes
de sécurité suivantes lors de la configuration, de l’utilisation et de l’entretien de votre robot.
Ce guide du propriétaire comprend des renseignements sur les modèles de réglementation:
RVE-Y2, ADG-N1, Batterie : ABL-F, ABL-D2Ax, ABL-D2Bx (x = 1 or 2)

FR
AVERTISSEMENT: Indique une situation dangereuse qui, si elle n’est pas évitée, peut
entraîner la mort ou de graves blessures.
ATTENTION: Indique une situation dangereuse qui, si elle n’est pas évitée, peut
entraîner des blessures mineures ou modérées.
AVIS: Indique une situation dangereuse qui, si elle n’est pas évitée, peut entraîner des
dommages matériels.
GÉNÉRAL
AVERTISSEMENT
• Ce produit est fourni avec un cordon d’alimentation adapté à votre région
et est conçu pour être branché uniquement sur une prise de courant c.a.
domestique standard. Ne pas utiliser un autre cordon d’alimentation ni une
autre prise multiple. Pour obtenir un cordon de remplacement adapté à
votre région, communiquez avec le service d’assistance à la clientèle.
• Ne pas démonter ou ouvrir le dispositif d’élimination de la saleté, sauf si
vous y êtes invité. Ils ne renferment aucune pièce pouvant être réparée par
l’utilisateur. Confier l’entretien à du personnel d’entretien qualifié.
• Risque de décharge électrique; n’utiliser l’appareil qu’à l’intérieur dans un
environnement sec.
• Ne pas manipuler ce produit avec les mains mouillées.
• Ne pas utiliser de chargeurs non autorisés. L’utilisation d’un chargeur non
autorisé pourrait faire en sorte que la batterie surchauffe, prenne feu ou
explose, ou que de la fumée s’en dégage.
• Ce produit n’est pas un jouet. Il est nécessaire de surveiller les jeunes
enfants et les animaux domestiques lorsque le produit est en marche.
• Ne pas s’asseoir ou se tenir debout sur le produit.
• Ne ranger et n’utiliser ce produit qu’à température ambiante.
• Utiliser une barrière physique si la pièce à nettoyer comprend un
balcon afin d’empêcher le robot d’accéder au balcon et de garantir un
fonctionnement sécuritaire.
• Nettoyer les détecteurs de vide pour éliminer l’accumulation de saleté.
• Si la pièce à nettoyer comprend des électroménagers, comme un four, un
ventilateur, une chaufferette ou un humidificateur d’air, retirer les appareils
avant de commencer le nettoyage. Des blessures, des accidents ou des
risques de défectuosité pourraient survenir si le robot entre en contact avec
les appareils et les pousse.
• Ce robot est conçu pour être utilisé sur des planchers secs uniquement.
Ne pas utiliser cet appareil pour ramasser des liquides renversés. Éviter de
mouiller le robot ou la station de recharge.
ATTENTION
• Ne pas utiliser le robot dans des zones avec des prises de courant
exposées au sol.
• Ne pas utiliser cet appareil pour ramasser des objets tranchants, du
verre ou tout objet qui brûle ou qui fume.
• Ne pas oublier que le robot se déplace tout seul. Faire attention lors des
déplacements dans la zone où le robot est en marche afin d’éviter de
marcher dessus ou de trébucher.
• Si l’appareil passe sur un cordon d’alimentation et l’entraîne, il est
possible qu’un objet sur une table ou une étagère soit également
entraîné. Avant d’utiliser cet appareil, ramasser les objets comme les
vêtements et les papiers volants et ne pas laisser traîner les cordons de
stores ou de rideaux, les cordons d’alimentation et les objets fragiles.
Éteindre les chandelles. Fermer les appareils de chauffage autonomes.
• Effectuer l’entretien requis conformément au guide du propriétaire pour
garantir le fonctionnement sécuritaire du robot et de la station de recharge.
AVIS
• Ne placer aucun objet sur le robot ou la station de recharge.
• Si les contacts du chargeur ne sont pas nettoyés régulièrement, il est
possible que la batterie du robot ne puisse plus se recharger.
• Avant d’utiliser votre robot pour nettoyer les tapis, vérifier s’ils sont
adaptés au nettoyage avec brosses ou barres. L’utilisation de votre
robot pour nettoyer un tapis qui n’est pas compatible pourrait
endommager vos tapis. Communiquer avec le fabricant des tapis pour
connaître les accessoires à utiliser.
BATTERIE
AVERTISSEMENT
• Ne pas ouvrir, écraser, chauffer à plus de 80°C (176°F) ou brûler. Suivre les
directives du guide du propriétaire pour une utilisation, une maintenance,
une manipulation et une élimination adéquates.
• Ne pas court-circuiter la batterie en permettant à des objets métalliques
d’entrer en contact avec les bornes de la batterie, et ne pas l’immerger
dans un liquide. Ne pas soumettre les batteries à des chocs mécaniques.
• Les batteries au lithium-ion et les produits qui contiennent des batteries au

FR
lithium-ion sont soumis à des règles de transport très strictes. Si vous avez
besoin d’expédier ce produit (batterie incluse) pour des services, un voyage
ou toute autre raison, vous devez consulter la section sur le dépannage de
votre manuel ou communiquer avec le service d’assistance à la clientèle
pour obtenir les instructions d’expédition.
• Vérifier régulièrement le bloc-batterie pour détecter tout signe de
dommage ou de fuite. Ne pas charger les blocs-batterie endommagés
ou qui fuient. Ne pas laisser le liquide entrer en contact avec la peau
ou les yeux. En cas de contact, laver la zone touchée abondamment à
l’eau et consulter un médecin. Placer la batterie dans un sac en plastique
hermétiquement fermé et recycler ou éliminer la batterie conformément
aux réglementations environnementales locales, ou retourner la batterie au
centre de service local agréé iRobot aux fins d’élimination.
ATTENTION
• L’utilisation de la batterie par de jeunes enfants doit être surveillée.
Consultez immédiatement un professionnel de la santé en cas
d’ingestion d’une pile ou d’une batterie.
AVIS
• Le bloc-batterie doit être retiré du robot avant d’être recyclé
ou éliminé.
• Pour obtenir des résultats optimaux, utiliser uniquement la batterie au
lithium-ion qui est fournie avec le robot.
• Ne pas utiliser de batteries non rechargeables. Utiliser uniquement la
batterie rechargeable fournie avec le produit. Pour la remplacer, procurez-
vous une batterie iRobot identique ou communiquez avec le service
d’assistance à la clientèle d’iRobot pour connaître d’autres options.
• Avant de ranger à long terme le robot et ses accessoires, toujours charger
les batteries et les retirer du robot.
Le symbole sur la batterie indique que la batterie ne doit pas être éliminée avec les déchets
municipaux non triés. En tant qu’utilisateur nal, il est de votre responsabilité de vous
débarrasser de la batterie en n de vie de votre appareil d’une manière respectueuse de
l’environnement, comme suit:
(1) la retourner au distributeur/revendeur auprès duquel vous avez acheté le produit; ou
(2) la déposer dans un point de collecte désigné.
La collecte et le recyclage séparés des batteries en n de vie au moment de leur
élimination contribuent à préserver les ressources naturelles et à garantir leur recyclage
de manière à protéger la santé humaine et l’environnement. Pour plus d’informations,
veuillez communiquer avec votre centre de recyclage local ou avec le revendeur auprès
duquel vous avez acheté le produit. Si les batteries en n de vie ne sont pas correctement
éliminées, les substances contenues dans les batteries et les accumulateurs peuvent avoir
des eets néfastes sur l’environnement et la santé humaine.
Remarque: Pour recycler la batterie, consultez call2recycle.org ou appelez au
1800-822-8837.
ÉLIMINATION AUTOMATIQUE DE LA SALETÉ
AVERTISSEMENT
• Ne pas utiliser si le cordon ou la fiche sont endommagés. Si l’appareil
ne fonctionne pas comme il le devrait, s’il a été échappé, endommagé,
laissé dehors ou échappé dans l’eau, le retourner à un centre de
services.
• Toujours déconnecter le robot du dispositif d’élimination de la saleté
avant de le nettoyer ou de l’entretenir.
• Ne pas piler sur le dispositif d’élimination de la saleté.
• N’insérer aucun objet dans les ouvertures. Ne pas utiliser si une ouverture
est obstruée. Maintenir exempt de poussières, de peluches et de
cheveux ainsi que de tout ce qui pourrait réduire le débit d’air.
• Pour entretenir correctement le dispositif d’élimination de la saleté, ne
pas placer d’objets extérieurs à l’intérieur et s’assurer qu’il est exempt
de débris.
• Afin d’éviter tout danger dû à un enclenchement intempestif de la
protection thermique, cet appareil ne doit pas être alimenté par un
dispositif de commutation externe, tel qu’une minuterie, ou connecté à
un circuit qui est régulièrement mis en marche et arrêté par le service
public.
• Ne verser aucun liquide dans l’appareil et ne pas l’immerger dans l’eau.
• Ne pas l’utiliser à l’extérieur ou sur des surfaces humides.
• Ne pas permettre qu’il soit utilisé comme un jouet. Il est nécessaire de
faire bien attention lorsqu’il est utilisé par des enfants ou à proximité
d’enfants.
• N’utiliser le robot que conformément aux instructions figurant dans ce
guide.
• Pour réduire le risque d’électrocution, débrancher le dispositif
d’élimination de la saleté avant de le nettoyer.
• Tenir le dispositif d’élimination de la saleté et le cordon d’alimentation à

FR
l’écart des surfaces chaudes.
• Ne pas verser de liquide dans ou sur le dispositif d’élimination de la
saleté.
• Pour réduire le risque d’électrocution, débranchez le dispositif
d’élimination de la saleté avant de le nettoyer.
• Tenez le dispositif d’élimination de la saleté et le cordon d’alimentation
à l’écart des surfaces chaudes.
AVIS
• Le produit ne peut pas être utilisé avec un convertisseur de puissance.
L’utilisation d’un convertisseur de puissance annule immédiatement la
garantie.
• Si vous vivez dans une zone sujette aux orages violents, nous vous
recommandons d’utiliser des parasurtenseurs. En cas d’orage violent,
vous pouvez protéger le dispositif d’élimination de la saleté à l’aide d’un
parasurtenseur.
• N’utilisez pas l’appareil sans sac à poussière ou filtre installé.