iRobot Roomba 4100 User manual

roomba_knowledge_4100.qxp 7/6/2004 8:43 PM Page 1

Roomba Anatomy
Cliff Sensor Openings
Edge-Cleaning
Side Brush
Main Cleaning Brushes Vacuum Inlet
Brush Guard
Release Buttons
Contact Points for
Drive-on-Charger/ Charging
Wall Mount
Bin Release Button
Main Power Button
Battery Charger Socket
Battery Indicator
roomba_knowledge_4100.qxp 7/6/2004 8:43 PM Page 3

Roomba Set-up
Charge for 7 hours —while
you’re waiting, load batteries
into your Virtual Wall.
2
3
4
1Place battery into Roomba Robotic
Floorvac.
(press down on both ends)
Clean the floor of loose
stuff like you would before
using a traditonal vacuum.
If you don’t vacuum over it,
don’t use Roomba over it
(e.g., rug tassels, power
and blind cords).
Set up your Virtual Wall
to keep Roomba where
you want it and away
from where you don’t.
roomba_knowledge_4100.qxp 7/6/2004 8:44 PM Page 4

Roomba Set-up
6
5
Go
clean!
Battery
indicator
7
Power
on
roomba_knowledge_4100.qxp 7/6/2004 8:44 PM Page 5

Works
great on spills or in
high traffic areas.
Roomba at Work
2
1Place Roomba in the center of the room and press
“Clean.” Roomba will automatically calculate how long it
needs to clean your entire room.
4To pause Roomba, hit any button on the panel. To stop, pick it up.
3“Dirt Alert” will illuminate when Roomba has detected dirt
that requires special attention. When the dirt is gone,
Roomba will continue in its standard cleaning
mode.
Use “Spot” to intensively clean a 3 ft. diameter area.
or
In dirtier
areas, I increase my
cleaning intensity.
roomba_knowledge_4100.qxp 7/6/2004 8:45 PM Page 6