6
Copyright 2021 Iron Bow Technologies
Remote Controller Operation
The
control is used to make a call and accept an incomin call. The
arrow can be used to move throu h the Vidyo on screen contacts directory and the
by selectin the reen call button a call is a launched to the selected location. If
the system is not in auto-answer, the connect key is used to accept an incomin
The
control is used to end a call. If the system is not in auto answer
mode, then the Han Up control can be used to reject an incomin call from a
remote site.
Microphone Mute selection stops the room audio from bein transmitted to the
remote site. A second selection resumes the audio transmission.
Camera Mute selection stops the ima e from the system main camera bein
transmitted to the remote site. A second selection resumes the camera
transmission. This control does not affect transmission of a presentation source.
call.
The Self View control is used to obtain an on screen view of the ima e from the
main system camera which can be switched on or off by this control.
sransmits an ima e from a UVC device that is
compatible with the Vidyo software application bein used. The video outvout of
the device is transmitted to the remote site as a second ima e in conjunction with
the main system camera. The ima e will automatically be shown as a window on
the main screen. To end transmission, select the control a ain
The Arrow keys control camera up/down/left/ri ht movement when the system is
in a call.
When the system is not in a call, the arrow keys are used to move throu h the
Vidyo on screen contacts directory. When the system is in a call, the camera
zoom in and out functions are controlled by the + and - si ns
When the system is in a call, the volume functions are controlled by the + and –
si ns. A volume indicator is displayed on the main the screen indicatin the
volume level
The ESC (Escape) key is available to remove any unwanted system or network
messa es that can be automatically displayed by the network e. . “New software
update available”
