IRONEDGE MH-040V1 User manual

OWNER’S MANUAL
CAUTION: Read all precautions and instructions before using
this equipment. Save this manual for future reference.
MH-040V1

Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

03
NOTE:
Tighten the six back bolts(H10-28) at first ,
and then tighten the four top bolts(H10-28).
INFORMATION
We recommend you have someone
assist you in lifting and assembling
your gym.
Follow these steps carefully and it
will make it easier to assemble your
gym.
●
●
1
2
3
4
6①
①
7
8
9
14
15
21
23
24
31
13
33
39
36
34
S6-2
H10-10
H10-10
H10-28
H10-28
20
32
29
C5-4
C5-4
H10-5
39
26
2728
S4-1
5
25
11
10
12
16
17
18 19 37
22
5
30
35
S6-2
S6-2
H10-5
H10-4
H10-32
H10-33
A10-4
W10
38
1
36
36

04
PARTS LIST
PART# DESCRIPTION Qty PART# DESCRIPTION Qty
1 LEFT MAIN FRAME 1
2 RIGHT MAIN FRAME 1
3 TOP CROSSBAR 1
4 BACK CROSSBAR 1
5 ROD CARRIAGE 4
6 BAR 1
7 CARRIAGE LEFT 1
8 CARRIAGE RIGHT 1
9 BAR STOP 2
10 COUNTER WEIGHT 2
11 COUNTER WEIGHT GUIDE ROD 4
12 HANGING PLATE 2
13 GUIDE ROD 2
14 ALUMINIUM RING 2
15 SHOCK GASKET OD30.5X20 2
S
D SHAPE END CAP
HOCK GASKET OD29.8X15 2
4
10
16 RUBBER FOOT 6
17 END CAP 114X65 4
18 RUBBER RING 10
19 INNER CAP D42 8
20 INNER CAP D48 2
21 PULLEY 4
22 SHAFT COLLAR 8
23 LINEAR BEARING 4
24 BEARING YCRS20 2
25 PLASTIC BUSHING D28 8
26 PLASTIC BUSHING D32 4
27 ALUMINIUM CAP 2
28 GRIP 2
29 PLASTIC STOPER 4
30 PULLEY SPACER SLEEVE 4
31 LOCK WASHER 4
32 NEEDLE BEARING 4
233
INNER CAP D25
Countersunk Head Screw M5X10 10
34
SOCKET SET SCREW M4X3 4
35
SOCKET SET SCREW M6X6 24
36
C5-4
S4-1
S6-2
CABLE L2145mm
HEX HEAD SCREW M10X25
HEX HEAD SCREW M10X20
12
8
HEX HEAD SCREW M10X50 4
HEX HEAD SCREW M10X140 10
H10-4
HEX HEAD SCREW M10X160 2
H10-5
H
ALLEN BOLT M10X20
EX HEAD SCREW M10X165 10
12
H10-10
WASHER φ10 82
H10-28
H10-32
H10-33
A10-4
W10
N10 NYLON NUT M10 34
37
SPRING CLIP 10
38
ADJUSTER RING 8
39 SMALL PLASTIC STOPER 2