Ironton 64135 User manual

READ & SAVE THESE INSTRUCTIONS
34 Inch L x 18 Inch W 400-Lb.
Steel Utility Cart
Owner’s Manual
WARNING: Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Item #64135

Page 2 of 12
Thank you very much for choosing an Ironton™ product!
For future reference, please complete the owner’s record below:
Serial Number/Lot Date Code: ________________________________
Purchase Date: ____________________________________________
Save the receipt, warranty, and this manual. It is important that you read
the entire manual to become familiar with this product before you begin
using it.
This cart is designed for certain applications only. Northern Tool and
Equipment is not responsible for issues arising from modification or
improper use of this product such as an application for which it was not
designed. We strongly recommend that this product not be modified
and/or used for any application other than that for which it was designed.
For technical questions, please call 1-800-222-5381.

Page 3 of 12
Table of Contents
Intended Use..........................................................................................................................................4
Packaging Contents..............................................................................................................................4
Technical Specifications ......................................................................................................................4
Important Safety Information...............................................................................................................4
Specific Operation Warnings...............................................................................................................5
Main Parts of Cart .................................................................................................................................6
Assembly Instructions..........................................................................................................................7
Before Each Use....................................................................................................................................9
Operating Instructions..........................................................................................................................9
Maintenance ..........................................................................................................................................9
Parts Diagram ......................................................................................................................................10
Parts List ..............................................................................................................................................10
Replacement Parts..............................................................................................................................10
Limited Warranty.................................................................................................................................11

Page 4 of 12
Intended Use
The Ironton 400-Lb. Steel Utility Cart is perfect for hauling garden supplies, fire wood, and more.
Packaging Contents
•Bed •Front/Rear Panel (2) •Side Panels (2)
•Handle •Front Axle •Rear Axle
•Yoke •Tires (4) •Hardware Kit
Technical Specifications
Property
Specification
Capacity
Overall maximum 400 lb. load capacity
Tires
10 inch Pneumatic Tires
Do not inflate the tires to more than 30 PSI.
Construction
Steel
Dimensions
34” x 18”
Important Safety Information
⚠
WARNING
•Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
•The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
•Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
•Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
•Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
•Industrial or commercial applications must follow OSHA requirements.
⚠
WARNING
PERSONAL SAFETY
•Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use
the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of

Page 5 of 12
inattention while operating the tool may result in serious personal injury.
•Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.
•Do not overreach. Keep proper footing and balance at all times.
⚠
CAUTION
CART USE AND CARE
•Do not force the cart. Products are safer and do a better job when used in the manner for which
they are designed. Plan your work and use the correct product for the job.
•Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
•Store the cart when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
•Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operation Warnings
⚠
WARNING
•Do not exceed overall maximum loading capacity of 400 lb.
•Do not load items on the top edges of the panels. Remove panels before loading oversized items.
Use caution when removing sides as the load can fall out and cause injury.
•Distribute load evenly over the surface of the bed. Do not load items on top of panels. Lower the
panel when objects are to be loaded onto the cart.
•Do not modify the cart in any way. Unauthorized modification may impair the function and/or safety
and could affect the life of the equipment. There are specific applications for which the cart was
designed.
•This cart is not intended for highway use. Do not exceed 5 mph.
•This cart is not equipped with brakes. Do not park the cart on an incline while loaded.
•Do not pull or tow the cart perpendicular to an incline while loaded. The cart may tip over and
cause injury.
•Do not use this cart to transport passengers in or on the cart.
•This cart is not a toy and is not to be used by or around children.
•Do not inflate the tires to more than 30 PSI. Do not use the cart on surfaces or for transporting
objects that can cause damage to the pneumatic tires.
•Always check of damaged or worn out parts before using the cart. Broken parts will affect the

Page 6 of 12
operation. Replace or repair damaged or worn parts immediately.
•Store an idle the cart. When the cart is not in use, store it in a secure place out of the reach of
children. Inspect it for good working condition prior to storage and before re-use.
Main Parts of Cart
Reference Number and Subassembly Piece
1 – Bed
2 - Side Panels (2)
3 - Front/Rear Panel (2)
4 - Front Axle
5 – Yoke
6 – Rear Axle
7 – Handle
8 – Tires (4)
9 - Hardware Kit

Page 7 of 12
Assembly Instructions
⚠
WARNING
•Read and understand all assembly and operating instructions before operating. Failure to follow
the safety rules and other basic safety precautions may result in serious personal injury.
Recommended Tools
Screwdriver, needle-nosed pliers, and adjustable wrenches
STEP 1
Assemble the front axle and rear axles to the bed of the cart. Tighten all bolts securely.
STEP 2
Assemble the yoke to the front axle. Tighten all bolts securely.

Page 8 of 12
STEP 3
Place the wheel spacer onto each axle, then the wheels (valve stem facing out) and secure using
washers and cotter pins. Bend back the ends of the cotter pins to keep them in place.
STEP 4
Turn the cart over. Slide the handle cap to the handle. Attach the handle to the yoke. Tighten the bolt
securely.
STEP 5
Attach the front, rear, left, and right panels.

Page 9 of 12
Before Each Use
⚠
WARNING
•If any parts become damaged, broken or misplaced, do not use this cart until replacement parts
have been obtained.
Operating Instructions
⚠
WARNING
•Do not exceed overall maximum loading capacity of 400 lb.
•Do not load items on the top edges of the panels. Remove panels before loading oversized items.
Use caution when removing sides as the load can fall out and cause injury.
•Distribute load evenly over the surface of the bed. Do not load items on top of panels. Lower the
panel when objects are to be loaded onto the cart.
•This cart is not intended for highway use. Do not exceed 5 mph.
•This cart is not equipped with brakes. Do not park the cart on an incline while loaded.
•Do not pull or tow the cart perpendicular to an incline while loaded. The cart may tip over and
cause injury.
•Do not use this cart to transport passengers in or on the cart.
•This cart is not a toy and is not to be used by or around children.
•Do not inflate the tires to more than 30 PSI. Do not use the cart on surfaces or for transporting
objects that can cause damage to the pneumatic tires.
Maintenance
It is recommended the cart be inspected for damage before each use. Check for damaged parts
before each use. Carefully check that the cart will operate properly and perform its intended function.
When not in use, store in a safe dry place, out of direct sunlight.
Maintenance Interval Maintenance Point
Before each use
•Inspect each part of the cart for damage.
•Inspect the hardware and retighten if any hardware is
loose.
•Check the tire pressure. Tire pressure should be at 30
PSI.

Page 10 of 12
Parts Diagram
Parts List
Reference
Part Description
Quantity
2
Side Panels
2
3
Front/Rear Panels
2
4
Front Axle
1
5
Yoke
1
6
Rear Axle
1
7
Handle
1
8
Tires
4
9
Hardware Kit
1
Replacement Parts
•For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
•Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.
•When ordering parts, the following information will be required: item description, item model
number, item serial number/item lot date code, and the replacement part reference number.
•The distributor reserves the rights to make design changes and improvements to product lines
and manuals without notice.

Page 11 of 12
Limited Warranty
Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only
(''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both
materials and workmanship, normal wear and tear excepted, for a period of 90 days from date of
purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in
accordance with product instructions. There are no other warranties, express or implied, including the
warranty of merchantability or fitness for a particular purpose. If the product does not comply with this
limited warranty, Your sole and exclusive remedy is that We will, at our sole option and within a
commercially reasonable time, either replace the product or product component without charge to You
or refund the purchase price (less shipping). This limited warranty is not transferable.
Limitations on the Warranty
This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect,
misuse, or as a result of any accident or in any other manner; (c) damage from misapplication,
overloading, or improper installation; (d) improper maintenance and repair; and (e) product alteration
in any manner by anyone other than Us, with the sole exception of alterations made pursuant to
product instructions and in a workmanlike manner.
Obligations of Purchaser
You must retain Your product purchase receipt to verify date of purchase and that You are the original
purchaser. To make a warranty claim, contact Us at 1-800-222-5381, identify the product by make
and model number, and follow the claim instructions that will be provided. The product and the
purchase receipt must be provided to Us in order to process Your warranty claim. Any returned
product that is replaced or refunded by Us becomes our property. You will be responsible for return
shipping costs or costs related to Your return visit to a retail store.
Remedy Limits
Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty
or any other warranty related to the product. We shall not be liable for: service or labor charges or
damage to Your property incurred in removing or replacing the product; any damages, including,
without limitation, damages to tangible personal property or personal injury, related to Your improper
use, installation, or maintenance of the product or product component; or any indirect, incidental or
consequential damages of any kind for any reason.
Assumption of Risk
You acknowledge and agree that any use of the product for any purpose other than the specified
use(s) stated in the product instructions is at Your own risk.
Governing Law
This limited warranty gives You specific legal rights, and You also may have other rights which vary
from state to state. Some states do not allow limitations or exclusions on implied warranties or
incidental or consequential damages, so the above limitations may not apply to You. This limited
warranty is governed by the laws of the State of Minnesota, without regard to rules pertaining to
conflicts of law. The state courts located in Dakota County, Minnesota shall have exclusive jurisdiction
for any disputes relating to this warranty.

Page 12 of 12
Distributed by:
Northern Tool & Equipment Company, Inc.
Burnsville, Minnesota 55306
www.northerntool.com
Made in China