IRUS 40.128 User manual
System
®
exhibition
Assembly instructions
for the Advertising tower 40.128
4x
8x 8x
8x
24x
constisting of:
- 8x Aluminium proles à 1250 mm incl. 8 bores
- 8x Aluminium cross proles with pointed screws for the lower and upper mounting
- 8x Aluminium cross proles for the middle mounting
- 12x PVC foam boards à 952 x 801 mm
- 24x H-proles à 789 mm to stabilize the panels.
- 4x Extension bolt for aluminium prole
12x
System
®
exhibition
Important during assembly
Pointed screws must be used for all proles that have holes.
1. Mount the bottom cross proles
including the pointed screws to
form the corner.
2. Insert the lower panels with the
H-proles.
3. Mount the required lower cross
proles including pointed screws.
4. Insert the remaining panels with
the H-proles one after the other.
5. Now mount the rst middle cross
prole. 6. Insert the bolts in the prole.
System
®
exhibition
7. Push the top proles onto the
bolts. Ensure that the holes face
upward.
8. Insert the next panels with the
H-proles one after the other.
9. Now mount the second middle
cross prole.
10. Insert the upper panels with the
H-proles one after the other.
11. Now mount the last cross prole
including the pointed screws.
Table of contents
Other IRUS Rack & Stand manuals
