IRUS I122 User manual

System
®
exhibition
Assembly instructions
for the exhibition stand I122
8x 16x
8x
6x 3x
6x 6x 2x
Consisting of:
- 6x Aluminium proles à 1250 mm incl. 8 bores
- 6x Aluminium proles à 1250 mm incl. 8 bores and adjustable feet
- 2x Aluminium proles à 300 mm incl. 8 bores for fascia sign frame
- 8x Aluminium cross proles with pointed screws for the lower and upper mounting
- 8x Aluminium cross proles with pointed screws for fascia sign frame
- 16x H-proles à 1217 mm to stabilize the panels
- 6x Extension bolts for aluminium prole
- 3x Longarm spothlights 450 mm incl. bulb

System
®
exhibition
Important
Pointed screws must be used for all proles with screw holes.
1. Mount the bottom cross proles
including the pointed screws to
form the corner and insert the bolts
in the prole.
2. Push the top proles onto the
bolts. Ensure that the holes face
upward.
3. Then mount the cross proles
including the pointed screws.
4. Mount the required lower cross
proles including pointed screws.

System
®
exhibition
5. Insert the bolts in the prole and
push the top proles onto the bolts.
Ensure that the holes face upward.
6. Then mount the cross proles
including the pointed screws.
7. Then mount the rst part of the
fascia sign frame
8. Then mount the rest of the fascia sign frame.
If necessary, use the adjustable feet to
compensate for unevenness in the oor.