IRUS I102 User manual

System
®
exhibition
Assembly instructions
for the exhibition stand I102
constisting of:
- 6x Aluminium proles à 1250 mm incl. 8 bores
- 6x Aluminium proles à 1250 mm incl. 8 bores and adjustable feet
- 2x Aluminium proles à 300 mm incl. 8 bores for fascia sign frame
- 10x Aluminium cross proles with pointed screws for the lower and upper mounting
- 5x Aluminium cross proles for the middle mounting
- 6x Aluminium cross proles with pointed screws for fascia sign frame
- 20x H-proles à 1200mm to stabilize the panels.
- 6x Extension bolt for aluminium prole
- 3x Longarm spothlights 450mm incl. bulb
6x 3x
5x
6x
6x 20x
2x
10x
6x

System
®
exhibition
Important
Pointed screws must be used for all proles with screw holes.
1. Mount the bottom cross proles
including the pointed screws to
form the corner.
2. Then mount the cross proles.
3. Mount the required lower cross
proles including pointed screws.
4. Then mount the cross proles
and insert the bolts in the prole.

System
®
exhibition
7. Then mount the fascia sign frame
5. Push the top proles onto the
bolts. Ensure that the holes face
upward.
6. Then mount the cross proles
including the pointed screws.
8. Fully assembled exhibition stand.
If necessary, use the adjustable feet
to compensate for unevenness in the oor.