IRUS I112 User manual

System
®
exhibition
Assembly instructions
for the exhibition stand I112
constisting of:
- 8x Aluminium proles à 1250 mm incl. 8 bores
- 8x Aluminium proles à 1250 mm incl. 8 bores and adjustable feet
- 14x Aluminium cross proles with pointed screws for the lower and upper mounting
- 28x H-proles à 1217 mm to stabilize the panels
- 8x Extension bolts for aluminium prole
- 3x Longarm spothlights 450 mm incl. bulb
8x 8x 14x
8x 3x
28x

System
®
exhibition
1. Mount the bottom cross proles
including the pointed screws to
form the corner and insert the bolts
in the prole.
2. Push the top proles onto the
bolts. Ensure that the holes face
upward.
3. Then mount the cross proles
including the pointed screws.
4. Mount the required lower cross
proles including pointed screws.

System
®
exhibition
5. Insert the bolts in the prole and
push the top proles onto the bolts.
Ensure that the holes face upward.
6. Then mount the cross proles
including the pointed screws.
7. Fully assembled exhibition stand.
If necessary, use the adjustable feet
to compensate for unevenness in the oor.