IRUS Advertising cube 40.121 User manual

System
®
exhibition
Assembly instructions
for the Advertising cube 40.121
constisting of:
- 4x Aluminium proles à 500 mm incl. 8 bores
- 8x Aluminium cross proles with pointed screws for the lower and upper mounting
- 4x PVC foam boards à 952 x 446 mm
- 8x H-proles à 434 mm to stabilize the panels.
- 4x Ring screws M10
4x
8x
4x
8x
4x

System
®
exhibition
Important during assembly
Pointed screws must be used for all proles that have holes.
1. Mount the bottom cross proles
including the pointed screws to
form the corner.
2. Insert the lower panels with the
H-proles and then mount the cross
proles.
3. Mount the required lower cross
proles including pointed screws.
4. Insert the remaining panels with the
H-proles one after the other.
5. Mount the cross prole incl.
pointes screws.
6. Turn the ring screw in the
aluminm prole.