IRUS Attachment module 180 VIII User manual

assembly instructions for the
Information panels
„Attachment module 180° VIII “ 61.439
constisting of:
- 1x Round Base à 0,95 kg incl. Flat mushroom
- 2x Aluminium prole „Flexi-Long“ à 1000mm
- 2x Cross prole „Flexi-Quick“ with pointed screws for lower and upper mounting
- 1x PVC foam board à 955x979 mm
- 1x Extension bolts
- 2x Aluminium H-Prole à 967 mm to stabilize the plates
1x
1x 2x 2x
1x 2x
System
®
Display

System
®
Display
1. First mount the Round base with the
aluminium proles.
4. Finally connect the upper
cross aluminium prole
2. Now insert the extension bolt into the lower
aluminium Prole and slide the upper
aluminium proles over the extension bolt.
Make sure that the boreholes are upwards.
3. Then mount the lower cross aluminium
prole and insert the panels. Then leave
the H-proles right and left along the
panels downwards.