ISESAR NEXhome T98 User manual

NTERCOM
NEXhome T98 is an Android SIP smart doorphone with
7-inch touchscreen, it offers multiple door access methods
such as the offline facial recognition. This model is good for
multi-family apartment, high-rise commercial buildings and
building complexes.
 Front Panel: Aluminum alloy
 RAM / ROM: 2GB / 16GB
 Display: 7-inch LCD
 Screen: Capacitive touch screen
 RGB Camera: 2M pixels
 IR Camera: 2M pixels
 White light LED: Auto
 Infrared LED: Auto
 Wiegand: Support
 RS485: Support
 RF card reader: 13.56MHz
 Relayout: 1
 Inputs: 2
 Microphone: -42dBV
 Speaker: Dual speakers, 4Ω / 2W
 Bluetooth: Support
 Ethernet: 1×RJ45, 10/100Mbps self-adaptive
 DC 12V/1.5A connector
 IP Level: IP65
 Installation: Wall-mounted & Flush-mounted
 Wall-mounted DIM: 316×130×33mm
 Flush-mounted DIM: 316×130×8mm
 Dimension: 316×130×26mm
 Working Humidity: ≤95%RH
 Working Temperature: -30°C ~ +70°C
 Storage Temperature: -40°C ~ +70°C
AI-Powered Facial Recognition Android Doorphone
IS-T98ISESAR
 Android OS
 7-inch high-resolution IPS touchscreen
 2-mega pixels dual camera with HDR
 Precise face recognition and liveness detection
 Durable vandal-proof glass panel and aluminum
frame
 Support card/keyfob access
 Support Bluetooth access
 IP65 dust and water Protection
 Smart fill-in light
 Body induction
 Easy to integrated with SIP systems and services
Highlights
HIGHLIGHTS
Physical & Power
PHYSICAL & POWER
XI`AN ISESAR TECHNOLOGY CO., LTD. 
ADD:Room2306,LingxianTimesplaza,GaoxinRoad,Xian
Web:www.isesar.com

Video
 Sensor: 1/2.8", CMOS
 Pixels: CIF, QCIF, VGA, 4CIF, 720p, 1080p
 Video codec: H.264
 Video resolution: up to 1920×1080p
 Max. image transfer rate: 1080p - 30fps
 Viewing angle: 92°(FOV)
 High-intense IR LEDs for fill-in light in dark
 Built-in light sensor to detect environment illumination
Deployment & Maintenance
 Auto-Provisioning
 Web management portal
 Web-based packet dump
 Configuration backup / restore
 Entry log export
 Credentials export/import
 Firmware upgrade
 System logs (include door access logs)
Scenarios
 Entrance of high-rise buildings
 VIP or C-level room
 High-end house or community
 Self-service kiosk
Door Entry Feature
Unlock methods: Face, Card/keyfob, PIN and BLE
Support live detection to prevent malicious attack such as
HD photo and retaken screen
Support visual human activity detection and real-time
video streams analysis, achieve senseless access
Support HDR, highly improve the facial recognition rate
under extreme conditions such as low, strong and back
light
Up to 20,000 facial image data, 98%+ recognition accuracy
Minimum illumination: 0.1LUX






IS-T98ISESAR
Networking
 Protocols: IPv4, HTTP, HTTPS, FTP, TFTP, SNMP, DNS, SNTP, RTSP, SRTP, RTP, TCP, UDP, TLS, ICMP, DHCP, ARP
NETWORKING
 SIP v2 (RFC3261)
 Audio Codec: G.771a, G.711u, G.729 (Narrowband)
G.722 (Broadband)
 DTMF: In-band, RFC2833, SIP Info
 Echo Cancellation
Audio
130mm 26mm
8mm
22.5mm
316mm
MAKE PROPERTIES SAFER
AND SMARTER

Before the installation of the device, please check you have the following items on hand.
IS-T98 Series Quick Guide
2
|
Product Overview
PRODUCT OVERVIEW
1
|
Preparation
PREPARATION
Waterproof cover
×6
DH-T98 Screw
R3×6
Screw
M4×15
×6×1×1
130.0
316.0
8.0
26.0 114.0
294.0
22.5
①
②
③
④
⑤
⑥
⑦
① White light LED
② Infrared LED
③ RGB and Infrared camera
④ Touch Screen
⑤ Card Reader
⑥ Loudspeaker
⑦ Mic
MAKE PROPERTIES SAFER
AND SMARTER
1

The device can be installed in both indoor and outdoor environment.
Outdoor installation: Avoid to exposing the device to direct sunlight, which will cause damage
to device and components due to high temperature.
Indoor installation: The device should be installed on somewhere 2 meters (6 feet) away from
light or 3 meters (9 feet) away from window/door.
3
|
Installation Environment
INSTALLATION ENVIRONMENT
4
|
Installation
INSTALLATION
IS-T98 Series Quick Guide
Backlight Direct sunlight Close to light
 Flush Mounting
307.3
TOP
51
121.9 43.5
230.0
90.0 51
37.0
66.0
A. Dig out a hole on wall. Hole dimension(mm): 307.3(H)×121.9(W)×51(D)
B. Installation Height: Place the camera 1.5m (around 4ft 11in) away from the ground
STEP 1
MAKE PROPERTIES SAFER
AND SMARTER
2

A. Lock the wall-mounting box on a Type86 bottom box with two M4×15 screws.
B. Lock the wall-mounting box on wall with four M4×15 screws.
C. Pull cables through the wall-mounting box and waterproof cover, then connect them to corresponding
interfaces of device. Lock the waterproof cover on device with four R3×6 screws.
D. Embed the device into wall-mounting box and adjust it until device sides run in alignment with the
vertical edges of wall, then lock the device from bottom with two R3×6 screws.
IS-T98 Series Quick Guide
A. Put the embedded box into the dug hole and lock it with six M4×15 screws. Then fill the gap between
wall and embedded box with cement or non-corrosive adhesive.
B. Attach the adjusting bracket into the embedded box and lock it with six M4×15 screws.
C. Pull the cables through the embedded box, bracket and the waterproof cover, then connect them to
corresponding interfaces of device. Lock the waterproof cover on device with four R3×6 screws.
D. Hook the top of device with bracket and adjust it until device sides run in alignment with the vertical
edges of wall, then lock the device from bottom with two R3×6 screws.
 Wall Mounting
STEP 2
A
B
C
D
MAKE PROPERTIES SAFER
AND SMARTER
3

IS-T98 Series Quick Guide
 Notes
Pin NO/COM is connected to the cathode lock
Pin NC/COM is connected to anode lock or magnetic lock.
+12VGNDGND 485B 485A
NODS GND SW NC COMGND
Exit Button Door LockDoor sensor
Elevator control device
Power
Network
5
|
Device Wiring
DEVICE WIRING
A B C D
MAKE PROPERTIES SAFER
AND SMARTER
4

6
|
Specifications
SPECIFICATIONS
7
|
Configurations
CONFIGURATIONS
8
|
Functions
FUNCTIONS
IS-T98 Series Quick Guide
The system language and the network setting can be selected and configured when the initial booting
of device.
 Initial Setup
You can make calls from the device by select
contacts or dial call number
 Make Calls
Enter the access PIN set in device to unlock the
door.
 PIN Unlock
Attach the saved access card or keyfob on the
card reader area of T98 to unlock the door.
 Card/Keyfob Unlock
Incoming calls to T98 will be answered automati-
cally by default.
 Auto Answer
Walk in front of camera, the device can recog-
nize the face and unlock the door if facial
image is matched.
 Face Unlock
Press the configured DTMF code on keypad of
device answering the call, the lock connected
on T98 will be unlocked remotely.
 DTMF Unlock
Enter 9999 in CALL menu then enter 3888 to get into the PROJECT SETTING. Tap NETWORK to check
the IP address.
 Check IP Address
Log into Web configuration portal of device, set up and register SIP accounts in INTERCOM-ACCOUNT
page. (You can refer to device user manual for more details)
 Set SIP Account
Select DTMF mode and configure the code in SYSTEM-RELAY page of Web configuration portal. (You
can refer to device user manual for more details)
 Set DTMF Code
 OS: Android
 Display: 7-inch LCD
 Resolution: 1024×600
 Input power: DC12V / 1.5A
 IP level: IP65
 Front panel: Aluminum
 Working Temperature: -30℃ ~ 70℃
 Working Humidity: 10%~95%RH
 Dimension:
316×130×26mm (Device Surface)
307.3×121.9×51mm (Flush Installation)
MAKE PROPERTIES SAFER
AND SMARTER
5

9
|
Precautions
PRECAUTIONS
IS-T98 Series Quick Guide
 Violent vibration, collision and shock will cause damages to device.
 Intense direct sunlight will seriously affect the device performance and life span.
 Keep the access card/keyfob away from magnet and water. DO NOT fold or bend the card/keyfob.
 The height between camera and ground should be 1.5m (around 4ft 11in) to guarantee the ideal
visual angle.
Visual Angle

MAKE PROPERTIES SAFER
AND SMARTER
6
XI`AN ISESAR TECHNOLOGY CO., LTD.
ADD.: Room 2306, Lingxian Times plaza, Gaoxin Road, Xi`an
Web: www.isesar.com