Isoled 113567 User manual
RGBW/RGB/CCT/Dimming
4 CH LED Controller
● : -Input voltage 12 24VDC
● : PWM constant voltageOutput type
● : 4CH, 3A/CHOutput current
● : 144-288WOutput power
● Grey levels: 4096/CH
● Dimming range: 0-100%
● Remote distance: 30m
● Working temperature: -30℃~55℃
● : L114×W38×H20mmProduct size
● Net weight: 53g
● Mini style controller with DC power socket input and 4 channel constant voltage output.
● Default as RGB/RGBW controller, need match RGB/RGBW remote, create colorful static or dynamic effect.
● Can also be used as color temperature or dimming controller, good compatibility.
● Full compatibility with a variety of single color, dual color and RGB/RGBW remote.
● Smooth dimming and switch without any flickering.
● When control RGB/RGBW light, built in 10 mode, include jump or gradual change style.
● Adopt 2.4GHz wireless technology, can accept up to 10 remote control.
● Auto-transmitting function, one receiver can transmit the signal from the remote to another receiver
within 15m, so the remote control distance can be beyond 100m.
● Auto-synchronization function, different receivers can work synchronously when they are controlled by
the same remote, under same dynamic mode and same speed.
● Can be WiFi controlled by APP installed on IOS or Android mobile devices while working with
WiFi-Relay controller.
● User can customize own RGB change mode list by APP for advanced function.
● Can connect with unlimited number of 4CH CV or CC power repeaters in series or in parallel
to expand output power, achieve synchronous control effect.
Technical parameters
Interface specification
Wiring diagram
LED power supply voltage and power select:
12V lamp, Input 12V power supply, can load 0~144W,
24V lamp, Input 24V power supply, can load 0~288W,
Power supply power must larger than load power 20%.
SW-VP for RGBW
RGBW LED strip
Power Supply
12-24VDC
Constant Voltage AC110-230V
Summary
Dimension
Match guide
SW-VP receiver match with all kinds of single or multiple zone 2.4G RF remote controller.
After match different color RF remote, the receiver become the same color controller.
User Guide
Use Match key
1. Match: Short press match key, within 5s, press on/off key or zone key of the remote.
2. Delete: Long press match key for 5s, delete all matched remote.
3. Multiple zone remote only use zone key to match each zone receiver.
Use Power-up
1. Match: Switch off the power, then switch on power again,
short press on/off key or zone key 3 times on the remote quickly within 5s after power on,
the link is done once the light blinks 3 times.
2. Delete: Switch off the power, then switch on power again,
short press on/off key or zone key 5 times on the remote quickly within 5s after power on,
the unlink is done once the light blinks 5 times.
3. Multiple zone remote only use zone key to match each zone receiver.
114.00 mm
38.00 mm
20.00 mm
LED output
DC Power input
Macth key
Uin=12 -24 VD C
Iin=12. 5A
113567
RGBW/R GB /C CT /D im mi ng
4CH LED Co nt ro ll er
+
-
Uout=4×( 12 -24 )V DC
Iout=4×3 A
Pout=4×( 36 -72 )W
Temp Range : -2 0℃~+55℃
MAD E IN PR C
OUT PU T
+
INP UT
12-2 4V DC
+
+
+
W
W4 +
+
+
2.4G wir el es s co nt ro l RoHS
Uin=1 2-2 4V DC
Iin=12 .5 A
113567
RGBW/ RG B/ CC T/D im mi ng
4CH LED C on tr ol ler
+
-
Uout= 4×(1 2-2 4) VDC
Iout= 4×3A
Pout= 4×(3 6-7 2) W
Temp Rang e: - 20℃~+5 5℃
MAD E IN PRC
OUT PU T
+
INP UT
12-2 4VD C
+
+
+
W
W4 +
+
+
2.4G wi re le ss c ontro l RoHS
W
RGB change mode list
SW-VP for single color
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller, please ensure good ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage of
the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to avoid
any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Safety information
SW-VP for dual color
Malfunctions analysis & troubleshooting
Wrong color 1. Wrong connection of R/G/B/W wires. 1. Reconnect R/G/B/W wires.
Malfunctions
Causes Troubleshooting
Uneven intensity
between front and
rear,with voltage drop
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
No. Name No. Name
RGB jump
RGB smooth
6 color jump
6 color smooth
Yellow cyan purple smooth
RGB fade in and out
Red fade in and out
Green fade in and out
Blue fade in and out
White fade in and out
1
2
3
4
5
6
7
8
9
10
Dual color WW/CW LED strip
Power Supply
12-24VDC
Constant Voltage AC110-230V
Uin=1 2-2 4V DC
Iin=12 .5 A
113567
RGBW/ RG B/ CC T/D im mi ng
4CH LED C on tr ol ler
+
-
Uout= 4×(1 2-2 4) VDC
Iout= 4×3A
Pout= 4×(3 6-7 2) W
Temp Rang e: - 20℃~+5 5℃
MAD E IN PRC
OUT PU T
+
INP UT
12-2 4V DC
+
+
+
W
W4 +
+
+
2.4G wi re le ss c ontro l RoHS
CW
+
+
+
Single color LED strip x 4
Power Supply
12-24VDC
Constant Voltage AC110-230V
Uin=1 2-2 4V DC
Iin=12 .5 A
113567
RGBW/ RG B/ CC T/D im mi ng
4CH LED C on tr ol ler
+
-
Uout= 4×(1 2-2 4) VDC
Iout= 4×3A
Pout= 4×(3 6-7 2) W
Temp Rang e: - 20℃~+5 5℃
MAD E IN PRC
OUT PU T
+
INP UT
12-2 4VD C
+
+
+
W
W4 +
+
+
2.4G wi re le ss c ontro l RoHS
+
