iSunshine Smart Bracelet Wristband Watch User manual

iSunshine Fitness Tracker User Manual
1, Key definition and “idle mode”screen
Power key: To turn on/off your fitness tracker
Enter key: To enter next level manual
Return key: To return back to “idle mode” after whatever operation
USB charging: To charge your fitness tracker with micro USB
inside package
2, Download APP
(1) This fitness tracker request IOS 7.0 above orAndroid 4.3 above system
(2) Download APP: Search and download “wristbandApp fitness” in Apple store or “wristbandApp” in
Google Play (Customer feedback there are several similar APP in google store, it’s the first one name
“Wristband GZGAMUT”), this APP is not available in Samsung APP store yet.
(3) If you use iPad, search in APP store, no result, please switch to “iPhone only”.
3.APP page introduction

Note 2: The page 3, setting and other function, cannot be displayed fully in one page, you need to slide down to
find all the menu.
4. To connect and synchronize the fitness tracker with smartphone:
(1) Press “enter key” of your wristband in “idle mode”, it comes to “main menu” , then continue
to press “enter key” twice, it comes to paring mode (Note: the right icon is , not ).
(2) Open the bluetooth of your smartphone and theAPP, enterAPP page 3 and slide down, find the connecting
button and click , the button will turn blue if the connection succeed(the screen of
fitness tracker will turn to at the same time) then click “synchronize” button to
synchronize.
(3) Now, put on your fitness tracker, it start recording your activity, but the data won’t synchronize to your
smartphoneAPP because the power consumption will be too much if the Bluetooth keep working, if you want to
see the data record on smartphoneAPP, you need to connect and synchronize as the first time you use it, or to
say, as step (2), then you can find the data details on page 2 of APP.
Note:
a. You need to connect and synchronize the fitness tracker with your phone every time before you want to check
the record on your phoneAPP.
b. If you set 9:00~21:00 as day time, it won’t record steps at sleep time (refer to below picture).
c. This fitness tracker estimate the distance of each your stride based on your height, please change the height
setting if you found the distance is not reasonable.
5. To use vibration alarm function:
Firstly set alarm on page 3 of theAPP , then connect and synchronize the fitness
tracker with your smartphone as step 3 also, or else, the fitness tracker don’t know what you have done on APP.
6. To use remote control camera function:
Connect as step 3, then click button on page 3 of APP, it will enter camera
mode, you can take picture as usually.
7. To check your activity record data on your wristband instead of on smartphone APP:
Press “enter key” to come to “main menu” , then press “power key” to enter “step record page”
, then press “enter key”, it will display the record the step number you have finished

, then press “power key”, it will display the distance you have finished , then
press “power key”, it will display calorie you have burned , then press “power key” again, it
will display your progress of target .
8. To check sleep monitor report:
(1) Press “enter key” to come to “main menu” , then press “power key” to come to “sleep
monitor menu” .
(2) Press “enter key” to find the sleep monitor report.
9. Remind:
(1) There is no remind when battery is low power, please charge your fitness tracker timely, you need to re-
synchronize the fitness tracker if it powered off due to low power, we will improve on this later.
(2) If the wristband screen cannot light up when you press any key, please charge a few minutes with the USB
cable inside package.
(3) The wristband will record data for 16 days before you synchronize to your APP on smartphone, the old data
inside wristband will be replaced with new data if you don’t synchronize to APP within 16 days.
(4) Got complain from customer saying "Each time I move arm it counts even when I was sitting", that's how a
wristband is designed, you can check other brand wristband also, we suggest you wear on non-dominant hand
(5) If you have more than one fitness tracker, want to connect them to one phone, please don’t unbind the 1st
tracker before try to connect the 2nd tracker.
Seller Support Contact
Mail: isunshineserv[email protected]m
Note: Please let us know your order ID when you send us mail, we can support you better.

iSunshine Fitness Tracker Connect and Synchronize
Download APP on your
smartphone.
Fitness tracker
in idle mode.
Fitness tracker
in pairing mode.
Smartphone
bluetooth turn on
Click this button
to connect.
Connected.
Click “SYNC” button
to synchronize.