iSysmart SGZ211 User manual

iSysmart
ZigBeeTM- ZigBee IR Gateway
User Manual
ZigBee IR Gateway
Model: SGZ211

2
Table of Contents
1. Introduction .............................................................................................................................................3
2. Product Appearance...............................................................................................................................4
3. Specification............................................................................................................................................5
4. Installation Diagram ...............................................................................................................................5
5. Setting up SGZ211........................................................................................................................................6
5.1. Join the ZigBee Network ............................................................................................................................. 6
5.2. Permit-Join ................................................................................................................................................... 6
5.3. Binding......................................................................................................................................................... 6
5.4. Controls........................................................................................................................................................ 6
5.5. Delete All IR Data........................................................................................................................................ 6
5.6. Restore to Factory Setting............................................................................................................................ 7
6. Home Automation Clusters for SGZ211...................................................................................................8
7. Important Maintenance Instructions ..................................................................................................10

3
1. Introduction
SGZ211 is an infrared gateway equipped with transmitter for infrared control, and it also acts as a router in the
ZigBee network. SGZ211 infrared control system learns IR codes and transmits to control appliances such as DVD
player.
SGZ211 is shipped with an extension infrared receiver to be connected to the extension adaptor input of SGZ211 for
extending user remote control.
What is ZigBee?
ZigBee is a short range wireless transmission technology based on IEEE802.15.4 standard and supports multiple
network topologies such as point-to-point, point-to-multipoint, and mesh networks. It is defined for a
general-purpose, cost-effective, low-power-consumption, low-data-rate, and easy-to-install wireless solution for
industrial control, embedded sensing, medical data collection, smoke and intruder warning, building automation
and home automation, etc.

4
2. Product Appearance
Binding Key
Status Indicator
Network Indicator
IR Key
Infrared Extension
12V DC

5
3. Specification
 Fully IEEE 802.15.4 compliant
 Utilizes 2.4GHz ISM band; up to 16 channels
 Power supply: DC 12V
 Standby consumption: ≤ 50mA
 Output power: 7dBm
 Infrared: 38kHz
 Infrared transmission range: 30 meters (line of sight)
 Up to 210 meters wireless transmission range in non-obstacle space
 Easy installation and configuration
4. Installation Diagram
 This device is NOT truly waterproof/ resistant and is for indoor use.
 The infrared transmission range is 30-meter (line of sight). It is recommended that installing SGZ211 on the
wall or the ceiling.

6
5. Setting up SGZ211
5.1. Join the ZigBee Network
After SGZ211 is powered on, it will search for an existing ZigBee network and send a request to join the
network automatically. While SGZ211 is under the coverage from a coordinator or a router whose permit-join
feature is enabled, SGZ211 will be permitted to join the network. The default permit-join period of time is 60
seconds.
Please refer to the following steps to complete the join:
Step1. Enable the permit-join function (valid for 60 seconds) of a coordinator or a router (please refer to
the user manual of the coordinator or the router to enable the permit-join feature).
Step2. Power on SGZ211, and it will start to search and join the network.
After SGZ211 is joined successfully, the Network Indicator will stay ON. When it is failed to join the
network, the indicator will stay OFF.
5.2. Permit-Join
SGZ211 is designed to work as a router. To allow other devices to join the ZigBee network, users could
enable the Permit-Join feature using the tips:
A. Press the Binding Key to enable the Permit-Join feature. The Network Indicator will flash per second.
B. The default Permit-Join period of time is 60 seconds.
5.3. Binding
SGZ211 can be bound with the device which supports IR cluster, like Z103.
Step1. Press and hold the Binding Key for 3 seconds.
Step2. Release the Binding Key when the network indicator flashes once.
Step3. Enable the binding feature of the device which supports IR cluster.
Step4. The indicator flashes 5 times after the binding is completed; otherwise, it will flash 10 times.
5.4. Controls
The maximum capacity of IR data:
 ZigbeeToIR →10240
 IRToZigbee →
5.5. Delete All IR Data
A. To delete ZigbeeToIR data:
Press and hold the IR Key for 5 seconds. The status indicator will flash once. Release the IR Key to delete

7
the ZigbeeToIR data.
B. To delete IRToZigbee data:
Press and hold the IR Key for 10 seconds. The status indicator will flash once. Release the IR Key to delete
the IRToZigbee data.
5.6. Restore to Factory Setting
While users would like SGZ211 to join a new network, a factory reset is required. To restore it to factory
setting, please follow the steps:
Step1. Power off SGZ211.
Step2. Press and hold the Binding Key, and then power on SGZ211.
Step3. After the status indicator shows fast flashes, release the button.
After the factory restore, reboot SGZ211 to initiate it.

8
6. Home Automation Clusters for SGZ211
A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A
simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table
lists the clusters which are supported by SGZ211.
1. DEVICE MODEL：SGZ211
2. DEVICE ID：Range Extender（0x0008）。
3. End point(s)：0x01
4.Endpoint cluster ID：
Server side
Client side
EP 0x01 (Device ID: Range Extender(0x0008 )
Basic(0000)
None
Identify(0003)
Commissioning(0x0015)
Attributes of the Basic Device Information attribute set
Identifier
Name
Type
Range
Access
Default
Mandatory /
Optional
0x0000
ZCLVersion
8-bit Unsigned
integer
0x00 –0xff
Read
only
0x03
M
0x0001
ApplicationVersion
8-bit Unsigned
integer
0x00 –0xff
Read
only
0x0E
O
0x0002
StackVersion
8-bit Unsigned
integer
0x00 –0xff
Read
only
0x2D
O
0x0003
HWVersion
8-bit Unsigned
integer
0x00 –0xff
Read
only
0x0A
O
0x0004
ManufacturerName
Character
string
0 –32 Bytes
Read
only
iSysmart
O
0x0005
ModelIdentifier
Character
string
0 –32bytes
Read
only
SGZ211E
3R
O
0x0006
DateCode
Character
string
0 –16 bytes
Read
only
2013011
8
O
0x0007
PowerSource
8-bit
Enumeration
0x00 –0xff
Read
only
0x04
（DC）
M

9
Identifier
Name
Type
Range
Access
Default
Mandatory /
Optional
0x0010
LocationDescription
Character
string
0 –16bytes
Read/
write
Empty
string
O
0x0011
PhysicalEnvironmen
t
8-bit
Enumeration
0x00 –0xff
Read/
write
0x00
O
0x0012
DeviceEnabled
Boolean
0x00–0x01
Read/
write
0x01
M

10
7. Important Maintenance Instructions
 Please keep the device in a dry place. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that corrode electronic circuits. In cases of accidental liquid spills to a device, please
leave the device dry properly before storing or using.
 Do not use or store the device in dusty or dirty areas.
 Do not use or store the device in extremely hot temperatures. High temperatures may damage the device or
battery.
 Do not use or store the device in extremely cold temperatures. When the device warms to its normal
temperature, moisture can form inside the device and damage the device or battery.
 Do not drop, knock, or shake the device. Rough handling would break it.
 Do not use strong chemicals or washing to clean the device.
 Do not paint the device. Paint would cause improper operation.
Handle your device, battery, and accessories with care. The suggestions above help you keep your device
operational. For damaged device, please contact the authorized service center in your area.

11
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.