Italialounge SOFA User manual

Use and Maintenance Manual

WARRANTY
THE WARRANTY PROVIDES:
5 YEARS for the internal (wooden structure)
2 YEARS for padding, cushions, mattresses, manual and electric mechanisms, suspension systems, wood and metal finishes and
coverings.
In the event of defects or damage, the product will be examined and evaluated if the problem is under the warranty coverage.
In the event of a positive outcome, it will be decided at our discretion whether to repair the defective product or to replace it with an
identical or equivalent product.
WARRANTY CONDITIONS
The guarantees comes into effect from the date of purchase.
For all goods delivered by the manufacturer, the date of delivery is considered the starting of the warranty period.
The warranties are not valid on products which have been incorrectly stored, wrongly assembled or installed , for the ones used
improperly for purposes other than they are projected for and tampered items.
The warranty does not cover damages due to incorrect cleaning or maintenance.
The warranties do not cover normal wear, cuts, incisions or scratches, damages caused by impacts or accidents.
Unless otherwise indicated, warranties are not valid for damages resulting from outdoor use of the products or in humid and wet
environments or for any other use other than domestic.
Warranty rights are limited to the first purchaser of the product and are not transferable.
MAINTENANCE INSTRUCTIONS
In order to take advantage of the guarantee, it is necessary to follow the specific maintenance instructions of each product.
WARRANTY

PADDING IN SHAPE
The feather cushions (sterilized at high temperature) must be handled regularly to maintain their original appearance.
For avoiding the feather crushing, also due to uptake of moisture, it is recommended to expose the cushions padding to open air
every three months, if possible in the sun, in order to dry the residual humidity.
The padding made of fibre, feather or mixed, can undergo to variations on use and may present folds and volume changes:
then we recommend to manipulate them regularly to reshape the original look of your sofa.
EXPOSURE
Fabric or leather upholsteries are sensitive to light and heat. For these reasons you will have to avoid exposing your sofa under
direct sunlight, near powerful lamps or in proximity of heat sources.
DUSTING
This operation must be carried out regularly to eliminate dust and prevent it from settling deeply in the padding.
It can be done with a soft brush or a vacuum cleaner avoiding contact, rubbing and using it a low power mode.
Hard brushes and powerful cleaners may damages the fibres of the fabric threads, raising the appearance of pilling, as well as creating
abrasions on the leather surface.
To keep a clean leather sofa we recommend dusting the surface periodically with a soft, dry cloth then pass the surface with a specific
neutral cream of good quality.
A SOFA ALWAYS IN ORDER

Our Upholsteries have been carefully chosen to guarantee quality, durability and
an appropriate aesthetic result.
STAIN REMOVAL OF THE FABRIC
In case of stains remove the dirt immediately, dabbing with a clean and soft
cloth. Avoid rubbing the fabric as it could causing a change of appearance (fibre
alteration, discoloration, etc.)
In case you decide to use water, detergents or erasers, previously make a test on
a hidden or low visible part of the sofa.
Do not use water and detergents to clean fabrics that require dry cleaning.
Follow the given instructions.
With a solution made of 1/3 of water, 1/3 of alcohol at 90 °, 1/3 of white vinegar, swab with a
sponge trying to remove the stain with soft circular movements.
Before it dries, remove the residues of the products used with cold water and then dry
with a cloth. Allow it to dry up completely, brush it very sofltly.
In the case of seborrhoea halos a slight discoloration may occur after stain removal, generally
due to the head rubbing against the sofa and to the aggressiveness of the scalp sebum.
CHEWING RUBBER, CANDLE WAX
Cool the stain with ice, wrapped in cellophane, then remove it gently. If there is still a trace,
remove it with a soft eraser.
MUD, DRY POWDER, MILK, BLOOD, URINE, SWEET
A solution of 70% water with 30% ammonia should be applied with a sponge removing
the stain, rinse and dry with a damp cloth. If necessary repeat the operation. Allow to dry
completely and brush softly.
BUTTER, FAT FOOD, OIL, WAX, LIPSTICK, PEN, INK
Apply 90 ° alcohol or chlorinated solvent with a clean cloth, dab gently avoid rubbing. Rinse,
dry with a clean cloth. If necessary, repeat the operation. Allow it to dry up completely, brush
softly.
BALLPOINT PEN, SHOES CREAM, CEWING GUM
Dab with absorbent fabric impregnated with 90 ° ethyl alcohol or turpentine essence (white
spirit).
For Decò leather upholsteries, consult the SKIN MAINTENANCE sheet.
FABRIC MAINTENANCE
40° 30°
hand wash at a max 30°C
do not wring out
do not wash in water
PFA
CL
MAINTENANCE SYMBOLS
dry-clean only in
Perchloroethylene
permit any agendas
oxidizing bleach
washable wholehearted
the solvents
used for dry cleaning
do not dry-clean
do not remove stains with solvents
non candeggiare al cloro
non-chlorine bleach
non candeggiare
do not chlorine bleach
permit any
oxidizing bleach
chlorine bleaching only cold
dilute solution
do not tumble drytumle dry low heatdrip dry
asciugatura appeso
drying hanging
iron at low temperatures
without steam
iron at temperatures
not exceeding 200°C do not iron
LAVAGGIO
HAND WASH
LAVAGGIO A SECCO
DRY CLEANING
STIRATURA
IRONING
SMACCHIATURA
STAIN REMOVAL
ASCIUGATURA
DRYING
hand wash at a maximum 30°Chand wash at a maximum 40°C
iron at temperatures
not exceeding 150°C

Our leathers are chosen with care and quality.
Being a natural product it maintains its characteristics unchanged: therefore
small marks left by scars, insect bites, slight stretch marks,
wrinkles, grain differences and tonal variations have to be considered guarantee
of a natural product.
Leather is sensititive to the temperature, traction and stretching.
Heat and light can dry the skin and fade colours, so avoid
direct exposure to sunlight and proximity to sources of intense heat (chimneys,
radiators etc.). Beware of sharpened objects or clothing buckles and scratches
of domestic animals.
MAINTENANCE
Perform cleaning and protection operations every three months.
With cleaning, remove dust, dirt and stains to get one clean surface. With protection
through a specific cream that nourishes leather to protect it from drying out, from
stains, from rubbing e light discoloration. Avoid sprays with solvents and oil-based
products containing fat.
DUSTING
For regular maintenance of the sofa, dust the surface weekly of the leather with a
damp cloth or with a low-power vacuum cleaner equipped with a soft brush nozzle.
LEATHER STAINS-REMOVAL
Carry out leather stain removal and cleaning using only suitable products.
Start testing the materials you use a low visible part of your sofa and wait a
few hours. Immediately remove the substance by dabbing with a cloth or paper
white absorbent, then wipe with a cloth soaked in water and dry with a dry cloth.
Never rub or apply excessive pressure because the surfaces might be damaged.
SANDED LEATHERS
They are subjected to special treatments to mitigate their imperfections: the
surface is regular, soft to touch and resistant. For stains removal use mild soapy
water and dedicated products.
RECTIFIED LEATHERS
They are subjected to special treatments that allow you to eliminate some
imperfections: they retain a natural appearance, the grain is not perfectly
uniform and particularly soft surface. For spotting use only mild soapy water and
dedicated products.
TOP GRAINS AND SEMI ANILINE
They do not undergo grinding, so their grain is natural and not uniform, they can
present small scars and wrinkles to guarantee their naturalness.
They are treated lightly with protective products to maintain the touch soft and
silky. For these types of leathers use specific products, to remove dust and stains.
This kind of leather can be dusted, but not washed.
ANILINE LEATHER
They do not undergo a surface finishing process so the original appearance is
unaffected. They do not undergo any covering and protective treatments for which
they are very vulnerable and acquire a “lived” aspect over time.
This type of leather can only be dusted with a soft and dry cloth.
NUBUCK or SUEDE
It is an aniline leather with a frosted surface so as to obtain an appearance velvety.
It is very soft, warm and natural. Soft and breathable. They do not undergo any
surface finishingprocesssotheyaredelicate.
This type of leather can only be dusted with a soft and dry cloth.
LEATHER MAINTENANCE

WOOD
Remove dust with a soft cloth. For wooden surfaces use. If necessary, only
appropriate products. These operations must be carried out very carefully , to
avoid any scratches on the surface. Exposure todirect sunlight can alter the colour
of the wood.
CERAMIC
Remove dust with a soft cloth. Clean stains with water and appropriate detergents.
When ceramics is combined with other materials such as wood or metal, follow the
precautions necessary to keep these materials intact.
GLASS
Remove dust with a soft cloth. It is advisable to perform the cleaning of the glass
parts using alcohol diluted with water or different bur specific products, drying
then with a soft cloth. These operations must be carried out very carefully to avoid
to form scratches on the surface.
METAL
Clean with mild soap and water and avoid cutting or scratching the painted
surface. Furthermore, corrosive products must not be used because they could
damage the painted parts or alter the colours.
MATERIALS MAINTENANCE
CARPET MAINTENANCE
In the first period natural fibres can cause the appearance of pilling.
For cleaning use a vacuum cleaner with reduced power not exceeding 1000
Watts. Do not use vacuum cleaners with a rotating brush, as they can damage
the fibres.
For washing contact a specialized laundry.
Do not store the carpet tightly closed to avoid moisture damage.
Do not expose the carpet to direct sunlight, as it may fade over time.
Table of contents
Popular Indoor Furnishing manuals by other brands

FMD
FMD CHAT 229-001 Assembly guide

Manhattan Comfort
Manhattan Comfort UTOPIA 89300 Assembly instructions

Cooper Lighting
Cooper Lighting Shaper 482 Specification sheet

Knight
Knight Ergoplan Bookcase 1200H Assembly instructions

Cooper Lighting
Cooper Lighting Shaper 499-RP specification

Costway
Costway HU10078 user manual