ITC Audio T-6202 User manual

Please follow the instructions in this manual to obtain the optimum resultsfrom this unit.
We also recommend that you keep this manual handyfor future reference.
SPEAKER SELECTOR
OPERATION MANUAL
AUDIOAUDIO
PUBLIC ADDRESS SYSTEM
T-6202
910
8
67
SPEAKER ZONES
5
3 4
T-6202
SPEAKER SELECTOR
2
1
POWER
ON
OFF

TABLE OFCONTENTS
T-6202 2
1. SAFETYPRECAUTIONS .......................................................................................3
2. GENERALDESCRIPTION ....................................................................................5
3. FEATURES ...............................................................................................................5
4. NOMENCLATUREAND FUNCTIONS
4.1 Front Panel..............................................................................................................6
4.2 RearPanel.............................................................................................................. 7
5. .........................................................................................8
6. APPLICATIONS .......................................................................................................9
7.SPECIFICATIONS .................................................................................................. 10
8.DIMENSIONAL DIAGRAM ....................................................................................11
MACHINE OPERATION

Be sure to read the instructions in this sectioncarefully before use.
Make sure to observe the instructions inthis manual as the conventions of safety symbols andmessages
regarded as very important precautions are included.
We also recommend you keep this instructionmanual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest dealer.
ITC
ITC
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
3
1. SAFETY PRECAUTIONS
T-6202

An all-pole mainsswitch with acontact separation ofat least 3mm in eachpole shall beincorporated in
the electrical installationof the building.
When Installing the Unit
Never plug in nor remove the power supply plug
with wet hands, as doing so maycause electric
shock.
When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Contact your dealer as to the cleaning. If dust
is allowed toaccumulate in the unit over a long
periodof time,a fire or damage to the unit may
result.
ITC
Ifdust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically.In addition, insert the plug in the wall
outletsecurely.
Switchoff the power, and unplug the power supply
plug from the ACoutlet for safety purposeswhen
cleaning or leaving theunitunusedfor 10 days or
more.Doingotherwise may cause afire or electric
shock.
1. SAFETY PRECAUTIONS
4
T-6202

5
3. FEATURES
The T-6202 is a 10-zone speaker selector that provides two amplifier inputs one for background music programs,
the other for paging and emergency notification.
2. GENERAL DESCRIPTION
=Generate EMC signal.
=Built-in siren and user-recorded message.
=Two minutes recording and output.
=Recording signal and volume control.
=Automatic or manual operation.
=LED power indicator.
T-6202

6
1. POWER
Power indicator
2. POWER SWITCH
On top of the opening Power
Press the end, power shut down
4. NOMENCLATUREAND FUNCTIONS
23
3. SPEAKER ZONES(1~10)
Zone activation switches
4. SPEAKER ZONES(1~10)
Speaker zones (1~10) indicators
1
4.1 FRONT PANEL
POWER
T-6202
SPEAKER SELECTOR
ON
OFF 12 3 4 5678910
SPEAKER ZONES
4
T-6202

NOMENCLATURE ANDFUCTIONS
7
5. COM
Communication between devices
6. CH1~CH10
Connecting speakers(CH1~CH10)
7. ~220V+/50Hz AC POWER INPUT
8. ALARM OUT
Alarm signal output
ALARM IN
Alarm signal input
9.
10.ALARM IN(A.B)
Alarm signal input (A.B) terminal
11.INPUT(A.B)
Amplifier input(A.B)
5
4.2 REAR PANEL
7
6
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
COM
INPUT A
+ INPUT B + ALARM A
+
ALARM B
+ CH 1 - + CH 3 - + CH 4 - + CH 5 - + CH 6 - + CH 7 - + CH 8 - + CH 9 - + CH 10 -+ CH 2 -
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM IN
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM OUT
~220V 50Hz
T1AL250V
891011
T-6202

OPERATION
5. MACHINE OPERATION
1. Backgroundmusic signaldue topearAsit upinput
exigence broaddcastsignal dueto Bsit upinput (as
nothing exigencebroadcast focuson sthamplifier
can holdA.Bsit upparallel connection)
2. Pressat willsubarea choosekey becan choose
,
be ones turnsubarea
8
T-6202

6. APPLICATIONS
REAR PANEL CONNECTIONS
9
+ ALARM IN -
MIC LINE ALARM OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
~220V 50Hz
T1AL250V
SPEAKER SELECTORS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
COM
INPUT A
+ INPUT B
+ ALARM A
+
ALARM B
+ CH 1 - + CH 3 - + CH 4 - + CH 5 - + CH 6 - + CH 7 - + CH 8 - + CH 9 - + CH 10 -+ CH 2 -
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM IN
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM OUT
~220V 50Hz
T1AL250V
INPUTS
LINK
GND
LIFT
100V 70V 4~16 COM
OUTPUT
~220V/50Hz
FUSE
T8AL250V
POWER FUSE
350W 500W 650W
T10AL250V T12AL250V
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
PAGING SELECTOR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
COM
INPUT A
+ INPUT B
+ ALARM A
+
ALARM B
+ CH 1 - + CH 3 - + CH 4 - + CH 5 - + CH 6 - + C H 7 - + CH 8 - + CH 9 - + C H 10 -+ CH 2 -
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM IN
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM OUT
~220V 50Hz
T1AL250V
EMERGENCY PANEL POWER AMPLIFIER
ALARM IN
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 - + 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ADDRESSTAG
REMOTE OUT
REMOTE IN
CHIME
VOL MIC 2
IN LINE 1
IN LINE 2
IN AUDIO
OUT
~220V 50Hz
T1AL250V
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:.
+ A - + B -
ALARM OUT SWITCH OUT
SPEAKER
T-6202

7.SPECIFICATIONS
10
MODEL
SPEAKER SELECTORSSPEAKER SELECTORS
T-6202
MAX POWER PER ZONE
SPEAKER ZONES
INDICATORS
POWER REQUIREMENTS
DIMENSIONS(MM)
CONTROL
PROTECTION
POWER CONSUMPTION
NET WEIGHT
484X368X88
500W
MAX POWER
INPUT
110~120VACor 230~240VAC50/60Hz
24V DC(optional)
Individual zoneselectors
power switch
AC fuse,1A
40W
5.7Kg
10
Power LED,channelstatus LEDs-BGMor Priority
4.5Kg
1500W speakerload
GROSS WEIGHT
A(BGM), B(priority):100Vor 70V,COM
T-6202

100
Over
100
Over
Over
100
8. DIMENSIONALDIAGRAM
UNIT :mm
6
84 84
25
337
331
88
94
436
484
UNIT :mm
11
POWER
T-6202
SPEAKER SELECTOR
ON
OFF 12 3 4 5678910
SPEAKER ZONES
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
COM
INPUT A
+ INPUT B + ALARM A
+
ALARM B
+ CH 1 - + CH 3 - + CH 4 - + CH 5 - + CH 6 - + CH 7 - + CH 8 - + CH 9 - + CH 10 -+ CH 2 -
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM IN
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM OUT
~220V 50Hz
T1AL250V
POWER
T-6202
SPEAKER SELECTOR
ON
OFF 1 2 3 4 5678910
SPEAKER ZONES
T-6202

AUDIOAUDIO
Guangzhou ITC Electronic Technology Limited
Http://www.itc-pa.com.cn
PUBLIC ADDRESS SYSTEM
2008-02 Version1.1