8
Bluetooth Comfort Optical Mouse
ENGLISH
PACKAGE CONTENTS:
• Bluetooth Optical Mouse
• 1x AA 1.5V battery
• User´s manual
INSTALLATION GUIDE:
Step 1: Installing the battery
• Whenever new battery is installed, make sure that the battery is undam-
aged.
• Remove the battery cover.
• Insert one AA battery into the battery compartment, make sure to properly
orient the positive and negative ends (+/) as specied by the marks in
the battery compartment. Replace the battery cover and make sure it is
locked.
• Switch on the mouse, LED light will blink.
• Low-voltage alarming function: when the battery have been used for some
time and discover the LED light in „DPI-adjusting button“ blinks automati-
cally, which reminds you that battery´s voltage is becoming low, suggested
you replace the battery with new one.
Step 2: Connecting the Bluetooth mouse
Before you install the Bluetooth mouse, please make sure that your computer
supports Bluetooth function, and nishes the Bluetooth software installation.
Press the Link button for 2 seconds, the LED light in „DPI-adjusting button“
will blink, it´s now searching the Bluetooth device. Then please follow the be-
low procedures to install the mouse (It can slightly differs according to the
Bluetooht software):
• Make sure that the Bluetooth function has been activated. Double click
the Bluetooth Icon on the Task Bar or in the Control Panel, click „Add a
Bluetooth device“.
• Select „My device is set up and ready to be found“, click „Next“.
• Select Bluetooth mouse, click „Next“.
• In case the mouse requires pairing PIN code, enter „0000“.
Note: If you use other Bluetooth software, the installing procedure may be sim-
ilar. You need to try and understand it by yourself.
DESCRIPTION OF KEYS AND DPI ADJUSTMENT:
• Using „DPI-adjusting button“, the resolution of mouse can be switched
among 1000 / 1600 DPI in turn.
• Backward and Frontward buttons for your easily navigating forward and
backward on the internet.
