iTechworld SOLAR BLANKET 200W User manual

User Guide
200W / 300W
SOLAR BLANKET KIT
Please read this manual carefullly before you use your new solar blanket

Do not bend the solar panel cells.
While in use, keep your solar blanket & controller in a
ventilated area and away from any corrosive liquids.
Keep the solar blanket and controller clean at all times, and
regularly check connectors to ensure they're free of grit
before plugging them in.
Do not scratch the solar blanket with sharp objects.
Do not use the solar blanket to charge non-rechargeable
batteries. Doing so may result in harm to the user or
damage to the solar blanket and controller.
Do not put corrosive substances on this solar panel.
Ensure shade from buildings, trees and other objects does
not block sunlight while using the panels.
Ensure nothing sharp or heavy could potentially break or
damage the solar blanket during transport or storage.
This product is not to be used by children.
Warning & Safety
Information

Model:
300W
Cell Type:
Monocrystalline
Solar Cell Lamination:
ETFE Raptor Skin
Canvas Material:
600D Ballistic Nylon
Power Tolerance %:
± 5%
Max Power Output (W):
300W
Max Power Voltage (V):
18.8V
Max Power Current (A):
16A
Open Circuit Voltage (V):
22.44V
Short Circuit Current (A):
17.2A
Dimensions (Open):
2980x5x680mm (LxWxH)
Dimensions (Closed):
680x50x540mm (LxWxH)
Operating Temperature:
-40°C - 85°C
Weight:
6.1KG
Technical Information

Model:
200W
Cell Type:
Monocrystalline
Solar Cell Lamination:
ETFE Raptor Skin
Canvas Material:
600D Ballistic Nylon
Power Tolerance %:
± 5%
Max Power Output (W):
200W
Max Power Voltage (V):
18.8V
Max Power Current (A):
10.64A
Open Circuit Voltage (V):
22.44V
Short Circuit Current (A):
12.05A
Dimensions (Open):
2170x5x590mm (LxWxH)
Dimensions (Closed):
590x38x550mm (LxWxH)
Operating Temperature:
-40°C - 85°C
Weight:
2.3KG
Technical Information

Dimensions
200W Solar Blanket
300W Solar Blanket

Included In The Kit
Solar Blanket: 1x Solar Controller: 1x
5M Extension Lead: 1x Battery Clamps: 1x

Extend the solar blanket (1).
Fold out the built-in stand.
Point the solar cells towards the sun at the optimum angle.
Connect the battery clamps (4) onto your battery.
Connect the solar controller (2) to your battery using the
Anderson plug on the opposite end of the battery clamps (4).
Connect the solar blanket (1) to the solar controller using the
5M extension lead (3) if required.
1.
2.
3.
4.
5.
6.
How To Use
Connecting Steps
Disconnect the solar blanket (1) from the solar controller (2).
Disconnect the solar controller (2) from the battery clamps (4).
Disconnect the battery clamps (4) from your battery.
Fold up the solar blanket (1) as shown on the following page.
Store the accessories in the bag on the solar blanket (1).
1.
2.
3.
4.
5.
Disconnecting Steps

Folding Steps

WARRANTY
WHAT DOES THIS WARRANTY COVER?
Any defect in design or manufacture which results in the
product failing to perform substantially as described in
authorized advertising or literature.
We will either repair or replace the product at our discretion
providing that the fault is found to have been caused by a
design or manufacturing defect and not misuse or tampering.
You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. The benefits
provided to you as the consumer by this warranty are in
addition to other rights and remedies available to you under
Australian law.
Under normal usage conditions, this warranty covers:
THE WARRANTY DOES NOT COVER:
Any damage resulting from improper use
Faulty installation or modification made during installation
The cost of removing and re-installing the product
Travel and or other expenses due to the customer's remote
location
Transport charges and damage in transit. It is your responsibility
to deliver and pick up your product. Including any costs
associated with the postage of your repair or replacement
product. If you do freight your product, we recommend that you
insure against loss or damage.
Any loss directly or indirectly associated with the product failing
to operate.
Damage caused by mould, insects, animals, misuse, incorrect
operation, adverse weather, accidents and fair wear and tear.

For more information, please
visit our website or E-mail:
www.itechworld.com.au
[e-mail]
291 Great Eastern Highway Burswood, West Australia 6100