Itek I62002 Mounting instructions

BIG BUTTON
HANDS FREE
PHONE
MODEL I62002
YOUR SAFETY &
INSTRUCTION MANUAL
PLEASE READ CAREFULLY
www.itek-products.co.uk

2
CUSTOMER SUPPORT TEAM: [phone]
TECHNICAL DATA
Description: Big Button Telephone
Model: I62002
Battery Backup: DC 6V 4 x AA (not included)
DOCUMENTATION
We declare that this product conforms to the following product legislation in accordance with the
following directive(s):
2014/30/EU Electromagnetic Compatibility Directive.
2014/35/EU Low Voltage Directive.
2011/65/EU Restriction of Hazardous Substances Directive.
RK Wholesale LTD Quality Assurance, United Kingdom
WARRANTY
This product is guaranteed for 12 months from the date of original purchase. If any defect arises due
to faulty materials of workmanship, the faulty products must be returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
• The product must be returned to the retailer with proof of purchase.
• The product must be installed and used in accordance with the instructions contained in this
instruction guide.
• It must be used only for domestic purposes.
• It does not cover wear and tear, damage, misuse or consumable parts.
• RK Wholesale LTD has limited liability for incidental or consequential loss or damage.
• This guarantee is only Valid in the UK and Eire.
An extended warranty is available for this appliance.
See back page for details.

3
www.itek-products.co.uk
PRODUCT SAFETY
When using any electrical appliance, basic safety precautions should
always be followed including the following:
• Check that the voltage of the
main circuit corresponds with
the rating of the appliance
before operating.
• Please ensure that the
appliance is used on a stable,
level, and heat resistant surface.
• DO NOT immerse cords, plugs
or any part of the appliance in
water or any other liquid.
• DO NOT leave the appliance
unattended while it is operating.
• Close supervision is necessary
when any appliance is used by
or near children or pets.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved.
• Children shall not play with the
appliance.
• Cleaning and user maintenance
shall not be made by children
without supervision.
• Switch o at the wall socket
then remove the plug from
the socket when not in use or
before cleaning.
• If the supply cord or appliance
is damaged, stop using the
appliance immediately and seek
advice from the manufacturer
or its service agent or a similarly
qualied person.
• DO NOT let the cord hang over
the edge of a table or counter
or let it come into contact with
any hot surfaces.
• The use of accessory
attachments is not
recommended by the appliance
manufacturer, apart from those
supplied with this product.
• DO NOT carry the appliance by
the power cord.
• DO NOT use the appliance
outdoors.
• DO NOT use this product for
anything other than its intended
use.

4
CUSTOMER SUPPORT TEAM: [phone]
• This appliance is for household
use only.
• DO NOT spill liquid onto the
appliance.
If this happens, mop up the
liquid and seek advice from a
qualied technician.
• DO NOT put objects into any of
the openings.
• Keep the unit free from dust, lint
etc.
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the Customer
Support Team:
[phone]

5
www.itek-products.co.uk
BEFORE FIRST USE:
1. Remove the product from the box.
2. Remove any packaging from the product.
3. Please retain all packaging until you have checked and counted all the parts and the contents
against the parts list.
4. Your appliance is now ready for normal use.
Dispose of the packaging in a responsible manner.
1 2
1213
3
5
7
9
11
5
4
6
8
10
WHAT’S IN THE BOX
Instruction Manual
Telephone cable
Stand
1. Incoming call indicator light
2. Direct M1, M2, M3
3. In-use LED light
4. Up
5. Down
6. Del (delete)
7. Check
8. Set
9. Back
10. Flash
11. Hands free
12. Redial
13. Keypad
Rear Panel
1. Telephone line
2. Extension socket
3. RING Hi/Low
4. P/T switch
5. Voice Hi/Low
1 2 3 4

6
CUSTOMER SUPPORT TEAM: [phone]
BATTERIES
Open the battery compartment located at the
back of the phone and place 4 x AA batteries
(not included) taking care not to reverse the
poles. Close the battery compartment.
INSTALLATION
1. To assemble the phone, attach the stand
to the bottom on the phone.
2. Place the phone on a at surface,
positioned so that the telephone cable
will reach your telephone line or extension
socket.
3. Plug the coiled handset cord into the
handset. Plug the other end into the
socket on the left of the base unit.
4. Place the handset on the unit.
5. Plug the telephone cable into the socket
at the back of the base unit. Insert the
other end of the cable into your telephone
socket.
6. Lift the handset and check for a dial tone.
Note: If you connect the telephone to a line
with a broadband (ADSL) connection, you
must use a micro-lter between the telephone
and the telephone line; otherwise you may get
interference between the telephone and the
broadband.
WALL MOUNT
When wall mounting the phone, ensure that it
is close to a telephone wall socket, so that the
included cable can be easily connected.
1. To wall mount, measure the distance
between the two mounting brackets on
the back of the phone.
2. With a pencil, mark two xing hole
positions on the wall.
3. Drill the wall and insert wall plugs to
mount the phone.
4. Hang the phone.
USING YOUR APPLIANCE
On-Hook Mode:
When the handset is in the cradle
O-Hook Mode:
When the handset is out of the cradle – i.e. in
your hand or placed down on a surface.
CONTROLS
Flash key:
Use to transfer a phone call internally. To
transfer a phone call to an internal number,
press the ash key and enter the new number.
The ash key also allows you to switch to
another incoming call if you have call waiting
service.
Hands Free:
Press the hands free button to use the phone
without having to hold the handset.
Set:
Press and hold the SET button to enter
the menu settings. Press SET to conrm a
selection.
Redial:
Press to redial a number.
Check:
Press to check outgoing calls.
M1 M2 M3:
Press to view stored numbers, or press to save
and store a number.

7
www.itek-products.co.uk
MENU
To enter the Menu:
1. In on-hook mode, hold the SET key for 3 seconds.
2. Use the UP and DOWN keys to scroll through the menu.
3. Press SET to conrm your menu selection.
4. Some settings have sub-menu settings. Press set and then use the UP and DOWN keys to
choose and enter sub-menu settings.
MENU SETTING
1. DATE & TIME
1.1 DATE
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 1 to select the DATE and TIME menu.
• Press 1 to enter the DATE menu.
• The display will show the year and date. Use the number keys to enter the year and then
date.
• Press SET to conrm.
1.2 TIME
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 1 to select the DATE and TIME menu.
• Press 2 to enter the TIME menu.
• Use the number keys to enter the time.
• Press set to conrm.
2. FLASH & PULSE
2.1 FLASH
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 5 to select the FLASH & PULSE menu.
• Press 1 to enter the FLASH menu.
• When the LCD shows ‘FLASH 100’, use the UP and DOWN keys to select the ash time.
• You can select between 90, 95, 100, 120 180, 300, 600 and 1000ms (milliseconds).

8
CUSTOMER SUPPORT TEAM: [phone]
2.2 PULSE
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 5 to select the FLASH & PULSE menu.
• Press 2 to enter the PULSE menu.
• Use the UP and DOWN keys to select between pulse and tone.
• Press SET to conrm.
Note: Tone: for tone dial service. Pulse: for rotary pulse dial service.
3. AREA & PREFIX CODE
3.1 AREA CODE
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 6 to select the AREA AND PREFIX CODE menu.
• Press 1 to select AREA CODE.
• Use the number keys to enter the area code.
• Press SET to conrm.
3.2 PREFIX CODE
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 6 to select the AREA AND PREFIX code menu.
• Press 2 to select PREFIX CODE.
• Use the number keys to enter the prex code.
• Press SET to conrm.
Note: The prex code setting is for setting internal lines, if the phone is being used in an oce space
or by a company.
4. LCD CONTRAST
• Hold the SET key for 3 seconds until the LCD screen displays ‘SET 12345678’.
• Press 7 to enter the LCD CONTRAST menu.
• Use the UP and DOWN keys to select the desired contrast level.
• Press SET to conrm.

9
www.itek-products.co.uk
ON-HOOK MODE
Incoming Call:
Press DOWN to display incoming calls.
Use the UP and DOWN keys to review
incoming calls.
Dial Out:
When reviewing an incoming call, press
REDIAL to dial out the number shown on the
display.
Outgoing Call:
Press CHECK and then press the UP and
DOWN keys to review the outgoing calls.
Call Volume Adjustment:
There is a volume adjustment switch located on
the side of the handset. Switch between HI/LO
(high or low) volume.
OFF HOOK MODE
One-touch memory:
There are two ways to save a phone number
into the one-touch memory speed dial.
1. With the handset on hook, input the
phone number you wish to save, and
then long press M1, M2 or M3 to save the
phone number to that space.
2. Check the incoming out or outgoing call
log. Once you have found the number you
wish to save, long press M1, M2 or M3
to save.
CLEANING & CARE
1. Switch the appliance o, unplug from the
mains.
2. Wipe over the casing using a soft damp
cloth (if necessary a little washing up liquid
may be used). Do not immerse the unit in
water or any other liquid.
3. Do not use harsh abrasives or cleaners.
4. Ensure all parts are dried thoroughly with
soft towel before reusing.
WARNING:
DO NOT IMMERSE ANY ELECTRICAL PART
OF THE APPLIANCE IN WATER SUCH AS
MOTOR UNITS OR PLUGS.
PLEASE SEE CLEANING SECTION FOR
FURTHER INSTRUCTIONS.
DISPOSAL OF THE UNIT
Appliances bearing the symbol shown here
may not be disposed of in domestic rubbish.
You are required to dispose of old electrical
and electronic appliances like this separately.
Please visit www.recycle-more.co.uk or
www.recyclenow.co.uk
for access to information about the recycling
of electrical items.
Please visit www.weeeireland.ie for access to
information about the recycling of electrical
items purchased in Ireland.
The WEEE directive, introduced in August
2006, states that all electrical items must be
recycled, rather than taken to landll.
Please arrange to take this appliance to your
local Civic Amenity site for recycling, once it
has reached the end of its life.

10
CUSTOMER SUPPORT TEAM: [phone]
NOTES

11
www.itek-products.co.uk
NOTES

We hope you enjoy your appliance for many years.
As a thank you for purchasing one of our fantastic products,
we are oering you an extra 1 year peace of mind.
*To receive your extra guarantee period, register your appliance online
within 28 days of purchase by visiting:
www.itek-products.co.uk
Make sure to retain your original receipt.
Should you have a problem
with your appliance or need any spare parts please call our
Customer Support Team on:
[phone]
Distributed throughout the UK by RK Wholesale LTD
0218.V4